oil AUDI A4 1999 B5 / 1.G 01V Transmission Drive Pinion Assembly Workshop Manual

39-156

Notes:

General repair notes page 00
-27
.

Disconnect torque tube from rear final drive with
the final drive installed page 39
-96
.

Disconnect torque tube from rear final drive with
the final drive removed page 39
-126
.

Replace both tapered roller bearings together. If
possible, use same manufacturer!
Do not grease new tapered roller bearings
additionally for friction torque measurement.
The bearings are already greased with a
special oil from the factory.
Removing differential page 39
-128
.

Adjustments are required when replacing
components marked with
1) Adjustment
overview page 39
-170
.
Pa
ge 5 of 14 Drive
pinion, removin
g, installin
g, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.14

39-163


Fig. 9 Pressing in small tapered roller bearing outer race
- The outer race must be oiled and installed using VW408A punch and
30-205 thrust pad.

WARNING!
Wear protective gloves! Fig. 10 Pressing on small tapered roller bearing inner race
- Insert drive pinion with a new spacer sleeve.
-
Heat up small tapered roller bearing inner race to approx. 100 C and
insert on drive pinion. - Press drive pinion upward and insert bearing up to stop using 40-21
sleeve.
Pa
ge 12 of 14 Drive
pinion, removin
g, installin
g, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.14