torque AUDI A4 1999 B5 / 1.G 01V Transmission Oil Pan And Oil Strainer Assembly Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 1999, Model line: A4, Model: AUDI A4 1999 B5 / 1.GPages: 44, PDF Size: 0.83 MB
Page 20 of 44
38-20
Installing
Installation is reverse of removal, noting the following:
Note:
Drain plug and oil seal must both be replaced.
Tightening torques - Remove ATF drain plug -1- and drain ATF.
- Loosen bolts of oil pan in diagonal sequence.
- Clean all 4 magnets in oil pan recesses. Ensure full surface contact of
the magnets on the oil pan.
- Replace gaskets.
- Fill up ATF page 37
-140
.
Component
Nm
Drain plug to oil pan 40
Oil pan to transmission housing
(diagonally in sequence)
10
Pa
ge 20 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1
Page 21 of 44
38-21
Oil strainer, removing and installing
Removing
- Removing oil pan page 38
-19
.
Installing
Tightening torque - Removing oil strainer bolts (arrows).
- Pull oil strainer off of valve body.
- Lightly coat seal on suction collar of oil strainer with ATF.
- Carefully press suction collar of oil strainer into the opening at valve
body up to stop.
- Bolt on oil strainer.
- Installing oil pan page 38
-20
.
- Fill up ATF page 37
-140
.
Component
Nm
Oil strainer to valve body 6
Pa
ge 21 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1
Page 28 of 44
38-28
All:
Tightening torque - Connect clip to wiring harness connector (arrow).
- Installing oil strainer page 38
-21
.
- Installing oil pan page 38
-20
.
- Fill up ATF page 37
-140
.
Component
Nm
Valve body to transmission housing (from inside out) 8
Pa
ge 28 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1
Page 34 of 44
38-34
Tightening torques - Rotate switch until the alignment hole -4- at switch housing can be
fitted on the alignment pin -2- at transmission housing.
- Installing left transmission support page 37
-125
.
Component
Nm
multi-function Transmission Range (TR) switch -F125- to
transmission
8
Pa
ge 34 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1
Page 38 of 44
38-38
For transmissions with hydraulic control
E18/2
Removing
- Removing valve body page 38
-22
.
Installing - Unbolt Sensor for transmission RPM -A- from transmission.
- Bolt on Sensor for transmission RPM -A- at transmission via bolt -B-.
Tightening torque is 9 Nm.
Pa
ge 38 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1