differential AUDI A4 1999 B5 / 1.G 01W Transmission Pinion Shaft Workshop Manual

35-29


When the bolt is tightened, the outer race will be pulled out of the
housing. Fig. 1 Pulling out double tapered roller bearing outer race
- Remove differential Page 39
-10
.
- Place pressure piece from 3128 bushing puller under outer race.
- Install threaded part of 3128 bushing puller onto transmission housing
using VW401 thrust plate.

Fig. 2 Pressing off double tapered roller bearing inner race
- Remove circlip before pressing off.
Outer race -A- must be installed to press off inner race.
Pa
ge 12 of 26 Pinion shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.35.3