length AUDI A4 1999 B5 / 1.G 01W Transmission Pinion Shaft Workshop Manual

35-28


36 -
Bushing
Secures tapered roller bearing inner racePulling out Fig. 6Does not need to be installed after tapered
roller bearing has been replaced
37 -
Tapered roller bearing outer race1) Pulling out Fig. 7Pressing in Fig. 8
38 -
Shim S4
List of adjustments Page 39
-33
39 -
Pressure plate
Varying thickness Fig. 25
40 -
Rubber washer
Compensated length variationsTo remove, install self-tapping screw into
center of rubber washer and pull out at
screw Thickness: 7.0 mm (0.28 in.)
41 -
Transmission cover With reverse idler gear Page 35
-44
Coat sealing surfaces with thin layer of
Pa
ge 10 of 26 Pinion shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.35.3