maintenance AUDI A4 1999 B5 / 1.G Airbag Service Workshop Manual

69-60

Airbag sport steering wheel, retrofitting


For vehicles m.y. 1995 that were equipped
with an airbag as standard equipment, an Audi
dealer can retrofit the vehicle with an airbag sport
steering wheel.
The following components are required: airbag
sport steering wheel, airbag unit and applicable
label for the vehicle (e.g. S4).
Remove the sticker with the expiration date from
the new airbag unit and apply it to the airbag
identification plate on the lower driver-side B-
pillar.
If the vehicle does not have a label, note airbag
replacement in the maintenance plan.
Pa
ge 28 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3

69-80


Installing
Note:
Do not cut anti-crush fleece -4- in area near retaining clip -5-.
- Remove anti-crush fleece -4- before drilling.
- Drill out mounting holes to 5.5 mm.
- Pull anti-crush fleece -4- over seat backrest frame.
- Clip side airbag -1- with anti-crush fleece into place.
- Install bolts -2-, pull up anti-crush fleece -4-, install nuts and tighten to
5.5 Nm (49 ft lb).
- Remove expiration date sticker from airbag unit and place over old
sticker on driver's door.
- If vehicle does not have label, note airbag replacement in maintenance
plan.
- Remove airbag number sticker from airbag unit and place over old
sticker on seat pan page 69
-75
, item -7-.
Pa
ge 49 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3