AUDI A4 1999 B5 / 1.G AWM Engine Crankshaft Remove And Install User Guide

13-77

Chain sprocket, removing and installing


Special tools and equipment

Removing
Sleeve 30-100Two-arm puller, commercially available.Protective gloves
- Remove oil pan Page 17
-11
.
- Removing front sealing flange Page 13
-56
.
- Disconnect chain wheel of oil pump, remove chain tensioner and chain
-Item 5 -, Page 17
-3 .

- Pull chain sprocket off crankshaft with puller -2- (Use a suitable washer
-1- to protect end of crankshaft).
Pa
ge 11 of 12 Crankshaft, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.3

13-78

Installing
Installation is carried out in the reverse order of
removal; note the following:

WARNING!

Wear protective gloves!

- Heat chain sprocket in heating appliance for
approx. 15 minutes to 220 C.
Note:
Installation position: wide collar on sprocket
facing toward engine

- Install chain sprocket on end of crankshaft using pliers and push onto
seat on crankshaft with drift sleeve 30-100.
Pa
ge 12 of 12 Crankshaft, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.3