AUDI A4 1999 B5 / 1.G Brakes Output DTM 03 User Guide

01-158

Output Diagnostic Test Mode (DTM)
-
Ifl: B+
Ofl: 0V
fl wheel free

Indicated on display:
ABS/EDL hydraulic pump -V64- will stop running.

Keep pressing brake pedal. Only the inlet valve is still activated and
interrupts the brake line. If the inlet valve is not leaking, you should be
able to turn the left-front wheel.
If you cannot turn the wheel, this means that the inlet valve or the check
valve activated in parallel to the inlet valve is leaking. Replace hydraulic
control unit.
-
Press button.
Pa
ge 11 of 66 Out
put Dia
gnostic Test Mode
(DTM
) (function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.13

01-159

Output Diagnostic Test Mode (DTM)
-
Ifl: 0V
Ofl: 0V
fl wheel locked

Indicated on display:

Keep pressing brake pedal. Inlet valve is no longer being activated. It is
no longer interrupting the brake line. The brake pedal will give perceptibly
under your foot. Fluid pressure is built again in the left-front caliper. The
wheel will be locked.
-
Press button.
Output Diagnostic Test Mode (DTM)
-
Release brake

Indicated on display:
-
Press button.
Pa
ge 12 of 66 Out
put Dia
gnostic Test Mode
(DTM
) (function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.13

01-160

Continue output Diagnostic Test Mode (DTM)
in order to check the front right, rear left, and
rear right wheels in sequence. The test steps
indicate the procedure for the front left wheel.
They will therefore not be repeated in detail. Output Diagnostic Test Mode (DTM)
-
Operate brake

Indicated on display:
-
Press button.
Output Diagnostic Test Mode (DTM)
-
Ifr: 0V
Ofr: 0V
fr wheel locked

Indicated on display:
-
Press button.
Output Diagnostic Test Mode (DTM)
-
Ifr: B+
Ofr: 0V
fr wheel locked

Indicated on display:
ABS/EDL hydraulic pump -V64- must start running.
The brake pedal must not give. -
Press button.
Output Diagnostic Test Mode (DTM)
-
Ifr: B+
Ofr: B+
fr wheel free

Indicated on display:
ABS/EDL hydraulic pump -V64- will stop running. -
Press button.
Pa
ge 13 of 66 Out
put Dia
gnostic Test Mode
(DTM
) (function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.13

01-161

Output Diagnostic Test Mode (DTM)
-
Ifr: B+
Ofr: 0V
fr wheel free

Indicated on display:
Brake pedal must give noticeably. -
Press button.
Output Diagnostic Test Mode (DTM)
-
Ifr: 0V
Ofr: 0V
fr wheel locked

Indicated on display:
-
Press button.
Output Diagnostic Test Mode (DTM)
-
Release brake

Indicated on display:
-
Press button.
Output Diagnostic Test Mode (DTM)
-
Operate brake

Indicated on display:
-
Press button.
Output Diagnostic Test Mode (DTM)
-
Irl 0V
Orl: 0V
rl wheel locked

Indicated on display:
-
Press button.
Output Diagnostic Test Mode (DTM)
-
Irl B+
Orl: 0V
rl wheel locked

Indicated on display:
ABS/EDL hydraulic pump -V64- must start running.
The brake pedal must not give. -
Press button.
Pa
ge 14 of 66 Out
put Dia
gnostic Test Mode
(DTM
) (function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.13

01-162

Output Diagnostic Test Mode (DTM)
-
Irl B+
Orl: B+
rl wheel free

Indicated on display:
ABS hydraulic pump -V64- will stop running. -
Press button.
Output Diagnostic Test Mode (DTM)
-
Irl B+
Orl: 0V
rl wheel free

Indicated on display:
Brake pedal must give noticeably. -
Press button.
Output Diagnostic Test Mode (DTM)
-
Irl 0V
Orl: 0V
rl wheel locked

Indicated on display:
-
Press button.
Output Diagnostic Test Mode (DTM)
-
Release brake

Indicated on display:
-
Press button.
Output Diagnostic Test Mode (DTM)
-
Operate brake

Indicated on display:
-
Press button.
Pa
ge 15 of 66 Out
put Dia
gnostic Test Mode
(DTM
) (function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.13

01-163

Output Diagnostic Test Mode (DTM)
-
Irr: 0V
Orr: 0V
rr wheel locked

Indicated on display:
-
Press button.
Output Diagnostic Test Mode (DTM)
-
Irr: B+
Orr: 0V
rr wheel locked

Indicated on display:
ABS/EDL hydraulic pump -V64- must start running.
The brake pedal must not give. -
Press button.
Output Diagnostic Test Mode (DTM)
-
Irr: B+
Orr: B+
rr wheel free

Indicated on display:
ABS/EDL hydraulic pump -V64- will stop running. -
Press button.
Output Diagnostic Test Mode (DTM)
-
Irr: B+
Orr: 0V
rr wheel free

Indicated on display:
Brake pedal must give noticeably. -
Press button.
Output Diagnostic Test Mode (DTM)
-
Irr: 0V
Orr: 0V
rr wheel locked

Indicated on display:
-
Press button.
Output Diagnostic Test Mode (DTM)
-
Release brake

Indicated on display:
Pa
ge 16 of 66 Out
put Dia
gnostic Test Mode
(DTM
) (function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.13

-
Press button.
Pa
ge 17 of 66 Out
put Dia
gnostic Test Mode
(DTM
) (function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.13

01-164

Output Diagnostic Test Mode (DTM)
-
EDL valves/ Hydr-P : B+ Wheel fl/fr lock

Indicated on display: Only significant for troubleshooting on
vehicles with EDL, starting with production deadline of calendar
week 21/1997. For these vehicles, the test step was modified in
parallel to implementation of EBD emergency mode. Prior to
production deadline of calendar week 21/1997, the hydraulic pump is
not activated. This test step does not apply to vehicles without EDL.
The vehicle version, as relates to EBD, can be recognized by checking
the note column under "Check control module version"; page 01
-128
.

The EDL change-over valve (left) and the EDL inlet valve are activated.
ABS return flow pump -V39- runs for one second. It draws brake fluid from
the brake fluid expansion tank via the EDL inlet valve. The hydraulic pump
builds brake fluid pressure in the EDL regulated wheel cylinders. These
wheels will then be locked.
If not, this indicates a mechanical malfunction in one of the valves,
providing there is no electrical malfunction in the system. Replace
hydraulic control unit.
This test step cannot be performed on vehicles that are not equipped with
EDL. These vehicles lack the EDL valves and the pressure relief valve.
Pa
ge 18 of 66 Out
put Dia
gnostic Test Mode
(DTM
) (function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.13

01-165

-
Press button.Output Diagnostic Test Mode (DTM)
-
End

Indicated on display:
Note:
The output diagnostic test mode is completed. The ABS/EDL warning light
and the red warning symbol for brake system go out.
-
Press button.
Rapid data transfer
HELP
Select function XX

Indicated on display:
Note:
If the ABS/EDL warning light does not go out, this indicates a
malfunction in the system. Observe test sequence exactly page 01
-
17
.
- Press buttons -0- and -6- to select "End Output" function 06. Press -Q-
button to confirm input.
Pa
ge 19 of 66 Out
put Dia
gnostic Test Mode
(DTM
) (function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.13

01-166

Electrical testing


If the On Board Diagnostic (OBD) sequence
does not provide any indication of the source of
the malfunction, work through all of the
electrical test steps.
If the OBD sequence identifies the source of the
malfunction, only carry out the test steps
recommended in the DTC table (specific
testing).

Test requirements
The "Automatic Test Sequence" was carried
out and it was determined that the
Transmission Control Module (TCM) and
Engine Control Module (ECM) only contain
DTCs relating to ABS/EDL.

- Connect the VAG1551 Scan Tool (ST) and
select the address word 00 with ignition
switched on;

- After completing electrical test, check and
erase DTC memories of Transmission Control
Module (TCM) and Engine Control Module
(ECM).
Pa
ge 20 of 66 Out
put Dia
gnostic Test Mode
(DTM
) (function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.13