mirror AUDI A4 1999 B5 / 1.G Engine Oil Level Checking Workshop Manual

51

Brake pad thickness, checking


Inspection service:

Dimension -a- = pad thickness including backing plate. Wear limit = 7 mm
(0.28 in.).
Thoroughly remove all dirt from wheels.
If pad thickness including backing plate is 7 mm (0.28 in.) or less the
brake pads have reached or exceeded wear limit and must be replaced. - Determine thickness of outer and inner pads by inspecting visually.
View through opening in wheel. Use a flashlight and mirror if necessary.
- Tighten wheel bolts to 110 Nm (81 ft lb).
Pa
ge 51 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6

58

Transport locks, removing

On certain vehicle versions, blocking elements -
1- (in a luminous color) are installed in the front
suspension struts. These models are
recognizable by a tag on the mirror.

- Relieve pressure on coil spring (e.g. vehicle on
lift).

Note:
It is not necessary to remove wheels.

- Pull auxiliary spring -2- down.
- Remove 2 blocking eiements -1- fitted to each suspension strut.
Pa
ge 58 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6