AUDI A4 1999 B5 / 1.G Instrument Cluster OBD From Model Year 1999 Service Manual

AUDI A4 1999 B5 / 1.G Instrument Cluster OBD From Model Year 1999 Service Manual A4 1999 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/916/w960_916-0.png AUDI A4 1999 B5 / 1.G Instrument Cluster OBD From Model Year 1999 Service Manual

Page 41 of 74

AUDI A4 1999 B5 / 1.G Instrument Cluster OBD From Model Year 1999 Service Manual 01-31
 Display group 050  
        
   Read Measuring Value Block 50  
  
 Indicated on display  
  
   2390 km   2400 RPM     
85.0 C  
     
  
     
      Coolant temperature  
50 to 130  C

Page 42 of 74

AUDI A4 1999 B5 / 1.G Instrument Cluster OBD From Model Year 1999 Service Manual 01-32
      
Adaptation (scan tool function 10)
 
      Function 10 is used to initiate and store the 
following changes:  
     
Adaptation of fuel gauge display
     Correction of the fuel consumpti

Page 43 of 74

AUDI A4 1999 B5 / 1.G Instrument Cluster OBD From Model Year 1999 Service Manual 01-33
 Adaptation table  Adaptation channel  
Adaptation function  
01   Adaptation of fuel gauge display   Page 01
-35
   
02   Resetting SRI after service   Page 01
-45
   
03   Adaptation of fuel c

Page 44 of 74

AUDI A4 1999 B5 / 1.G Instrument Cluster OBD From Model Year 1999 Service Manual 01-34
      
Initiating "Adaptation" function 10  Rapid data transfer 
HELP
Select function XX
    
Indicated on display  
-  Press buttons -1- and -0- to select "Adaptation" function 10.
Read Measuri

Page 45 of 74

AUDI A4 1999 B5 / 1.G Instrument Cluster OBD From Model Year 1999 Service Manual 01-35
      
Adaptation of fuel gauge display  Rapid data transfer 
HELP
Select function XX
    
Indicated on display  
-  Press buttons -1- and -0- to select "Adaptation" function 10 and press -
Q- b

Page 46 of 74

AUDI A4 1999 B5 / 1.G Instrument Cluster OBD From Model Year 1999 Service Manual 01-36
 
    
-  Disconnect fuel level sensor harness connector (near rear seat back, 
under trim in trunk), then perform adaptation of fuel level display. 
-  Switch ignition off.
    
-  Using test l

Page 47 of 74

AUDI A4 1999 B5 / 1.G Instrument Cluster OBD From Model Year 1999 Service Manual 01-37
      
Note:  
    
The fuel gauge reading is correct if the needle remains on the red section 
at the right side of the reserve zone (see illustration). 
-  Press buttons -0- and -1-. 
-  Press

Page 48 of 74

AUDI A4 1999 B5 / 1.G Instrument Cluster OBD From Model Year 1999 Service Manual 01-38
       Step-by-step method:  
     
-  Press button -1- to adjust value downward, 
down to 0 or press button -3- to adjust value 
upward, up to 255 (example: 215). Channel 1 Adaptation 215 
Q
-

Page 49 of 74

AUDI A4 1999 B5 / 1.G Instrument Cluster OBD From Model Year 1999 Service Manual 01-39
      
Adapting fuel consumption display (direct 
input method)  Rapid data transfer 
HELP
Select function XX
    
Indicated on display  
-  Press buttons -1- and -0- to select "Adaptation" func

Page 50 of 74

AUDI A4 1999 B5 / 1.G Instrument Cluster OBD From Model Year 1999 Service Manual 01-40
      
Note:  
     Correction of the fuel consumption display is only 
carried out with the direct input method. Channel 3 Adaptation 100Input adaptation value XXXXX
    
Indicated on display