buttons AUDI A4 1999 B5 / 1.G Instrument Cluster OBD From Model Year 2000 Workshop Manual

01-87

- Switch on ignition.

- Switch printer on via the PRINT button (indicator
lamp in button lights up).

- Press button -1- to select "Rapid data transfer"
operating mode 1. Rapid data transfer
HELP
Insert address word XX

Indicated on display
Address word: 17
- Press buttons -1- and -7-.
Rapid data transfer
Q
17 - Instrument cluster

Indicated on display:
- Press -Q- button to confirm input.
Pa
ge 11 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-91

Check DTC Memory (scan tool function
02)


Note:
The displayed DTC information is updated only
when initiating OBD or with "Erase DTC Memory"
function 05.

- Switch printer on via the PRINT button (indicator
lamp in button lights up).
Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -2-. This selects "Check DTC memory", function
02.
Rapid data transfer
Q
02 - Check DTC memory

Indicated on display
- Press -Q- button to confirm input.
X DTC reco
gnized!

The number of stored malfunctions appears in the display.
The stored malfunctions are displayed and printed out one after the
other.
- Check print-out against DTC table and repair malfunction Page 01
-
93
.
Pa
ge 15 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-102

Test of instrument cluster lighting, including
dimmer

Note:
Test can only be performed with lights switched
on.

Initiating output Diagnostic Test Mode:
Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -3-. This selects "output Diagnostic Test Mode
(DTM)", function 3.
Rapid data transfer
Q
03 - Output Dia
gnostic Test Mode

Indicated on display:
- Press -Q- button to confirm input. Output Diagnostic Test Mode for
analog displays is initiated immediately.
Output Diagnostic Test Mode Analo
g displa
ys

Indicated on display:
Pa
ge 29 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-107

Erase DTC Memory (scan tool function
05)


Note:
If DTC memory cannot be erased, check DTC
memory again and repair malfunction.

Requirements
DTC memory checked Page 01
-91
.

All malfunctions repaired.
After successful DTC memory check:
Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -5-. This selects "Erase DTC memory", function
05.
Pa
ge 35 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-109

End Output (scan tool function 06)

Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -6-. This selects "End Output", function 06.
Rapid data transfer
Q
06 End output

Indicated on display
- Press -Q- button to confirm input.
Rapid data transfer
HELP
Input address word XX

Indicated on display
- Switch off ignition.
- Disconnect harness connectors for the VAG1551 scan tool
Pa
ge 37 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-111

Initiating coding Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -7-. This selects "Code Control Module", function
07.
- Press -Q- button to confirm input.
Rapid data transfer
Q
07 Code control module

Indicated on display
- Press -Q- button to confirm input.
Code control moduleInput code number XXXXX
(0-32000
)

Indicated on display:
- Input code number using coding table Page 01
-112
. Example:
02242
02 Seat belt warning active
2 Country version US
4 4-cylinder
2 gas engine
Code control module
Q
Input code number 02242
(0-32000
)

Indicated on display:
- Press -Q- button to confirm input.
8D0920830... B5-INST. Clstr. M73 D08 Coding 02242
WSC 06812

Indicated on display:
-
Press button.
Pa
ge 39 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-114

Read Measuring Value Block (scan tool
function 08)


Initiating "Read Measuring Value Block"
Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -8-. This selects "Read measuring value block",
function 08.
- Press -Q- button to confirm input.
Rapid data transfer
Q
08 - Measured value block

Indicated on display
- Press -Q- button to confirm input.
Read measured value block Input displa
y group number XXX

Indicated on display:
The selected measuring value block is now displayed in standard form. - Enter display group number (from table Page 01
-115
) and press -Q-
button to confirm input.
Pa
ge 43 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-135

Initiating "Adaptation" function 10 Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -1- and -0-. This selects "Adaptation", function 10.
- Press -Q- button to confirm input.
Rapid data transfer
Q
10 - Adaptation

Indicated on display
- Press -Q- button to confirm input.
Adaptation Input channel number XX

Indicated on display:
Note:
After changing an adaptation value or ending an adaptation channel,
"Adaptation" function 10 must be performed again before selecting
another adaptation channel. - Enter desired adaptation channel (adaptation table Page 01
-134
).
- Press -Q- button to confirm input.
Pa
ge 71 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-136

Resetting SRI after service Rapid data transfer
HELP
Select function XX

Indicated on display
- Press -1- and -0- and confirm by pressing the -Q- button.
Rapid data transfer
Q
10 - Adaptation

Indicated on display
- Press -Q- button to confirm input.
Adaptation Input channel number XX

Indicated on display:
Notes: - Press buttons -0- and -2-.
- Press -Q- button to confirm input.
The Service Reminder Indicator (SRI) is used to remind the driver
when a service is necessary. Indication is in center display. Service reminder appears 1 month or 1200 miles before service limit
is reached. Resolution is 100 miles. Example for display: After a total
driving distance of 7000 miles, "SERVICE IN 1000 miles" is indicated.
Pa
ge 72 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2

01-140

Adaptation of fuel consumption display Rapid data transfer
HELP
Select function XX

Indicated on display
- Press -1- and -0- and confirm by pressing the -Q- button.
Rapid data transfer
Q
10 - Adaptation

Indicated on display
- Press -Q- button to confirm input.
Adaptation Input channel number XX

Indicated on display:
Notes: - Press buttons -0- and -3-.
- Press -Q- button to confirm input.
Adaptation only for vehicles with on board computer.Value entered must be between 85% and 115%.Value must be entered in steps of 5%.If the value "100" was changed due to a customer complaint, the
changed value must be transferred when replacing instrument cluster.
Channel 3 Adaptation 100 Consumption displa
y - 1 3-

Indicated on display:
-
Press button.
Pa
ge 76 of 99 Instrument cluster with lon
g service life, On Board Dia
gnostic
(OBD
) (from m.
y. 2000
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.2