AUDI A4 1999 B5 / 1.G Radio OBD User Guide

AUDI A4 1999 B5 / 1.G Radio OBD User Guide A4 1999 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/923/w960_923-0.png AUDI A4 1999 B5 / 1.G Radio OBD User Guide

Page 11 of 34

AUDI A4 1999 B5 / 1.G Radio OBD User Guide 01-10
 
DTC  
Possible cause  
Corrective action  
VAG1551 Scan Tool display        
00668        
Battery Positive Voltage (B+) 
Term. 30  
 
Signal too low 
Battery discharged or faultyShort circuit

Page 12 of 34

AUDI A4 1999 B5 / 1.G Radio OBD User Guide 01-11
 
DTC  
Possible cause  
Corrective action  
VAG1551 Scan Tool 
display       
00852        
Loudspeaker front  
 
Short circuit
 Open circuit 
Wiring damaged
 Front loudspeaker 
faulty 
 Open c

Page 13 of 34

AUDI A4 1999 B5 / 1.G Radio OBD User Guide 01-12
 
DTC  
Possible cause  
Corrective action  
VAG1551 Scan Tool 
display       
00854        
Output Radio Display 
Dash Panel Insert  
 
No signal 
Open circuit in wiring
 Instrument cluster 
co

Page 14 of 34

AUDI A4 1999 B5 / 1.G Radio OBD User Guide 01-13
 
DTC  
Possible cause  
Corrective action  
VAG1551 Scan Tool 
display       
00856        
Radio Antenna  
 
Short circuit
 Open circuit 
Open circuit in wiring
 Short circuit in antenna wire

Page 15 of 34

AUDI A4 1999 B5 / 1.G Radio OBD User Guide 01-14
      
Output Diagnostic Test Mode (scan tool 
function 03)
 
     
Notes:  
     
The output Diagnostic Test Mode (DTM) may 
only be carried out with the vehicle stationary 
and the engine not

Page 16 of 34

AUDI A4 1999 B5 / 1.G Radio OBD User Guide 01-15
      
Note:  
     Any malfunctions (e.g. short circuits) that occur 
will be recorded as DTCs in DTC memory. 
     
- 
Press  button.Output Diagnostic Test Mode Outlet Radio displa
y instrumen

Page 17 of 34

AUDI A4 1999 B5 / 1.G Radio OBD User Guide 01-16
      
Erase DTC Memory (scan tool function 
05)
 
     
Note:  
     DTC memory can be erased only after it has 
been checked (   page 01
-7 ). If DTC memory 
cannot be erased, again check DTC

Page 18 of 34

AUDI A4 1999 B5 / 1.G Radio OBD User Guide 01-17
 
Rapid data transfer  
Q
05 - Erase DTC Memory
    
Indicated on display  
-  Press -Q- button to confirm input.
Rapid data transfer DTC Memor
y is erased!
    
Indicated on display  
DTC memor

Page 19 of 34

AUDI A4 1999 B5 / 1.G Radio OBD User Guide 01-18
      
End Output (scan tool function 06)
 
     
-  Press buttons -0- and -6- to select "End Output" 
function 06. 
Rapid data transfer 
Q
06 - End Output
    
Indicated on display  
-  Press -

Page 20 of 34

AUDI A4 1999 B5 / 1.G Radio OBD User Guide 01-19
      
Code Control Module (scan tool function 
07)
 
      This function is used to code the radio for the 
following:  
     Radio configuration
     Sound system 
     Number of passive louds
Page:   < prev 1-10 11-20 21-30 31-40 next >