AUDI A4 1999 B5 / 1.G Suspension Rear Struts Remove And Install User Guide

AUDI A4 1999 B5 / 1.G Suspension Rear Struts Remove And Install User Guide A4 1999 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1169/w960_1169-0.png AUDI A4 1999 B5 / 1.G Suspension Rear Struts Remove And Install User Guide
Trending: lock, height, air suspension

Page 11 of 18

AUDI A4 1999 B5 / 1.G Suspension Rear Struts Remove And Install User Guide 42-31
 
    
Assembling 
Note:  
The left and right-side suspension struts are identical parts.  -  Compress coil spring using VAG1752/1 spring compressor until upper 
spring retainer is free. 
-  Rem

Page 12 of 18

AUDI A4 1999 B5 / 1.G Suspension Rear Struts Remove And Install User Guide 42-32
 
    
-  Align lower spring base and spring retainer in direction of shock 
absorber eye, as illustrated. 
-  Install compressed coil spring.
End of spring coil must lie against stop on spring

Page 13 of 18

AUDI A4 1999 B5 / 1.G Suspension Rear Struts Remove And Install User Guide 42-33
      
-  Install upper spring retainer.
    
Stamped nuts of spring retainer (arrows) must be located in recesses 
of spring base. 
-  Install mounting ring, dished washer and self-lock-nut.
-

Page 14 of 18

AUDI A4 1999 B5 / 1.G Suspension Rear Struts Remove And Install User Guide 42-34
 
    
-  Loosen lower locking lever and turn upper spring retainer until scale of 
VAG1752/2 spring mounting tool is positioned at 0 . -  Make sure that ends of springs lie against stops.
-  Se

Page 15 of 18

AUDI A4 1999 B5 / 1.G Suspension Rear Struts Remove And Install User Guide 42-35
 
    
CAUTION! 
Do not damage the surface of the spring when driving on the lower 
spring base - 19 - and the spring retainer - 18 -.  -  Turn lower spring base and spring retainer (   page 42

Page 16 of 18

AUDI A4 1999 B5 / 1.G Suspension Rear Struts Remove And Install User Guide 42-36
 
    
Axis -C- of cap is offset 90  from axis -A- of shock absorber eye.  
Note:  
Lubricate O-ring with grease G 000 405 A2 before installing cap. 
CAUTION! 
Part numbers are listed here for r

Page 17 of 18

AUDI A4 1999 B5 / 1.G Suspension Rear Struts Remove And Install User Guide 42-37
      
Information on weight codes (code number)  
      Spring/shock assemblies will be classified 
according to weight codes (code number) so that 
suspension components can be matched easily.

Page 18 of 18

AUDI A4 1999 B5 / 1.G Suspension Rear Struts Remove And Install User Guide 42-38
 
    
The weight code for the different suspension versions is indicated by the 
arrow in the illustration.  
1BA: Standard suspension1BB: Heavy duty suspension (approx. 20 mm (3/4 in.) higher)
Page:   < prev 1-10 11-20
Trending: lock, height, air suspension