lock AUDI A4 2000 B5 / 1.G 01A Transmission Clutch Release Mechanism Service Workshop Manual

30-21


9 -
Clutch release lever
Before installing, coat contact surface of
clutch slave cylinder plunger with thin layer
of copper grease, e.g. 381 351 TE
10 -
Torx bolt Always replace35 Nm (26 ft lb)Self-locking
11 -
Release bearing Do not wash-out bearing, wipe clean onlyReplace noisy bearings
12 -
Bolt

8DVA 000 504 socket-head bolt25 Nm (18 ft lb)

8DVA 000 505 socket-head bolt20 Nm (15 ft lb)
13 -
Clutch slave cylinder Tension clutch slave cylinder enough, so
that mounting bolts can be easily installed. Do not operate after clutch pedal has been
removed
Pa
ge 3 of 12 Clutch release mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.30.2