AUDI A4 2000 B5 / 1.G 01A Transmission Final Drive Gear Set User Guide

AUDI A4 2000 B5 / 1.G 01A Transmission Final Drive Gear Set User Guide https://www.carmanualsonline.info/img/6/1238/w960_1238-0.png AUDI A4 2000 B5 / 1.G 01A Transmission Final Drive Gear Set User Guide

Page 11 of 31

AUDI A4 2000 B5 / 1.G 01A Transmission Final Drive Gear Set User Guide 39-155
 
    
-  Bolt on 3304 bracket with two hex-head bolts M8 x 30.
-  Differential must be supported when tightening nut (e.g. using 
VAG1359/2 universal mount and transmission hoist VAG1383A). 
-

Page 12 of 31

AUDI A4 2000 B5 / 1.G 01A Transmission Final Drive Gear Set User Guide 39-156
 
    
Dimension -a-: 60 mm (2.36 in.)  
Dimension b: 55 mm (2.16 in.)  -  Set adjustment ring of VW385/1 universal mandrel.
-  Set sliding adjustment ring.
    
VW385/15 dial indicator extensi

Page 13 of 31

AUDI A4 2000 B5 / 1.G 01A Transmission Final Drive Gear Set User Guide 39-157
      
Note:  
     Before carrying out following measurements turn 
pinion shaft at least five turns in both directions, 
so that the tapered roller bearings settle. 
Otherwise a false reading

Page 14 of 31

AUDI A4 2000 B5 / 1.G 01A Transmission Final Drive Gear Set User Guide 39-158
      
Determining measurement "e"  
    
Measurement in following example: e = 1.60 mm  
Note:  
Dimension "e" is required to determine thickness of shim S3. 
Determining shim thickness "S3"

Page 15 of 31

AUDI A4 2000 B5 / 1.G 01A Transmission Final Drive Gear Set User Guide 39-159
      
Example:  
  
   Measured value e   1.60 mm  
-   Deviation r   0.42 mm  
=   Thickness of shim S3   1.18 mm  
     
-  Determine shim(s) according to table. Part 
numbers   parts catalo

Page 16 of 31

AUDI A4 2000 B5 / 1.G 01A Transmission Final Drive Gear Set User Guide 39-160
      
-  Remove pinion shaft and large tapered roller 
bearing outer race and install together with 
measured shims S3 and spacer sleeve   Page 
39
-139
 . 
     
-  Install small tapered roll

Page 17 of 31

AUDI A4 2000 B5 / 1.G 01A Transmission Final Drive Gear Set User Guide 1) Must have run at least 50 km (30 miles)  
Pa
ge 17 of 31 Final drive 
gear set, recommended se
quence for ad
justin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
p

Page 18 of 31

AUDI A4 2000 B5 / 1.G 01A Transmission Final Drive Gear Set User Guide 39-161
      
Checking measurements  
     
Checking dimension "r" 
     
-  Turn pinion shaft at least 5 turns in both 
directions. 
    
If the shims have been correctly selected, the dial indicator

Page 19 of 31

AUDI A4 2000 B5 / 1.G 01A Transmission Final Drive Gear Set User Guide 39-162
      
Ring gear, adjusting
 
     
Adjusting differential 
      The ring gear must be adjusted if any of the 
components have been replaced   table,   
Page 39
-149
 .  
     
Notes:

Page 20 of 31

AUDI A4 2000 B5 / 1.G 01A Transmission Final Drive Gear Set User Guide      
-  Remove differential tapered roller bearing outer 
races and remove shims   Page 39
-121
 . 
Pa
ge 20 of 31 Final drive 
gear set, recommended se
quence for ad
justin
g
11/20/2002 htt
p://127.
Page:   < prev 1-10 11-20 21-30 31-40 next >