Ignition coil AUDI A4 2000 B5 / 1.G AEB Engine Motronic MFI And Ignition System

24-3


5 -
EVAP canister purge regulator valve -N80-
6 -
Power output stage -N122-
5-pin connector: signal wiring from ECM4-pin connector: coil primary circuit
connections
7 -
Mass Air Flow (MAF) sensor -G70- In upper air cleaner housing
8 -
Wastegate bypass regulator valve -N75-
9 -
Ignition coils Cylinder 1: -N-Cylinder 2: -N128-Cylinder 3: -N158-Cylinder 4: -N163-
10 -
Fuel injectors Cylinder 1: -N30-Cylinder 2: -N31-Cylinder 3: -N32-Cylinder 4: -N33-
Pa
ge 3 of 135 Motronic Multi
port Fuel In
jection
(MFI
) and i
gnition s
ystem
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.1

BEFORE cranking engine at starting RPM
(e.g. for compression testing) disable ignition
and fuel injection systems:

Disconnect both ignition coil power output
stages, and both Motronic fuses at the E-box
in the plenum.
Disconnect harness connectors from all fuel
injectors.
Afterward, erase DTC memory.
Pa
ge 6 of 135 Motronic Multi
port Fuel In
jection
(MFI
) and i
gnition s
ystem
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.1