check AUDI A4 2000 B5 / 1.G AEB Engine Technical Data Spark Plug

28-11

- Check wiring for short circuits between terminals
of 3-pin connector, and between connector and
ECM/test box.


Connector terminal 2 to ECM/test box
socket 60

Connector terminal 3 to ECM/test box
socket 60

Connector terminal 3 to ECM/test box
socket 67

Specified value:
If the wiring is OK:

- Loosen knock sensor and re-tighten to 20 Nm
(15 ft lb).
If the malfunction still exists (stored in DTC
memory):

- Replace Knock Sensor (KS) 2 -G66-.

-
Check readiness code Page 01
-59
. If
Diagnostic Trouble Code (DTC) memory has
been erased, or ECM was disconnected,
Pa
ge 15 of 22 Technical data, s
park
plugs
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.28.1

28-12

Misfiring recognition, checking


Required special tools and test equipment

VAG 1551 or VAG 1552 Scan Tool (ST) with
VAG 1551/3 adapter cable

Checking

- Connect VAG 1551/1552 Scan Tool (ST) and
press buttons -0- and -1- to insert "Engine
Electronics" address word 01 (engine running at
idle) Page 01
-7 .
Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -8- to select "Read Measuring Value Block"
function 08, and press -Q- button to confirm input.
Read Measuring Value Block
HELP
Input displa
y group number XXX

Indicated on display
- Press buttons -0-, -1- and -4- to input display group number 14, and
press -Q- button to confirm input.
Read Measuring Value Block 14 1 2 3 4

Indicated on display (1-4 display groups)
Pa
ge 17 of 22 Technical data, s
park
plugs
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.28.1

28-13

- Compare displayed values with specified values
for misfire recognition (display fields 3-4):

Display groups

1 2 3 4
Display group 14: Misfire recognition
Display xxx RPM xx.xx ms xxx activated
deact
Indicates Engine speed
(in 40 RPM steps) Engine load Misfire harmful to emissions (total) Misfire recognition status
Range 0-6800 RPM 0.00-8.50 ms --- ---
Specified value 760-960 RPM 0.5-1.5 ms 20 activated

--- --- If displayed values are NOT OK Page 28
-14

If displayed values are OK:

- Check readiness code Page 01
-59
. If
Diagnostic Trouble Code (DTC) memory has
been erased, or ECM was disconnected,
generate new readiness code Page 01
-62
.

-
Press button to advance program
sequence.
Pa
ge 18 of 22 Technical data, s
park
plugs
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.28.1

28-16
Evaluating display groups 15 and 16 Display groups: 15 and
16


Display fields: 1-4
Possible cause
Corrective action
larger than 5

Ignition coil faulty
Spark plug connector faulty
Spark plug faulty- Check ignition coil Page 28
-17


Power output stage for ignition coil
faulty - Check power output stage for ignition coil Page
28
-21



Fuel injector faulty
Not enough fuel- Check fuel injectors Page 24
-87
- Check fuel in tank
Pa
ge 22 of 22 Technical data, s
park
plugs
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.28.1