lock AUDI A4 2000 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual

[x] Cancel search | Manufacturer: AUDI, Model Year: 2000, Model line: A4, Model: AUDI A4 2000 B5 / 1.G
Pages: 37, PDF Size: 0.15 MB
AUDI A4 2000 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual A4 2000 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1005/w960_1005-0.png AUDI A4 2000 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual
Search: (navigation system, fuel cap release, roof, phone, ECU, navigation update)

Page 1 of 37

AUDI A4 2000 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-88 Auxiliary input signals, checking Rear window defroster signal, checking Requirement Engine Control Module (ECM) coding OK page 01 -247 . Checking

Page 6 of 37

AUDI A4 2000 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-91 Checking - Start engine and let idle. - Switch A/C on, push "AUTO" button, set temperature to "LO" and blower speed to "HI". A/C compressor symbol must light up a

Page 7 of 37

AUDI A4 2000 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual Read measuring value block 4 1 2 3 4 Indicated on display; note value in display field 4 CAUTION! Do not use the shift inputs (identified by an X) during the RPM increase check. - Switch on

Page 18 of 37

AUDI A4 2000 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-97 Vehicle speed signal, checking Note: The vehicle speed signal originates from the vehicle speed sensor (on the transmission) and is routed to the instrument cluster as we

Page 21 of 37

AUDI A4 2000 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-99 Transmission Range (TR) selector lever position signal, checking Note: The Engine Control Module (ECM) uses this signal to recognize the transmission range selector leve

Page 23 of 37

AUDI A4 2000 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-100 - Press button. - Select "End Output" function 06 and press -Q- button to confirm input. If a display did NOT change, even though coding is OK: - Connect VAG 15

Page 26 of 37

AUDI A4 2000 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual - Test drive and select "Read Measuring Value Block" function 08, display group 004 page 01 -249 . Pa ge 26 of 37 Auxiliar y in put si gnals, checkin g 11/22/2002 htt p://127.0.0.1:8080/audi/se

Page 27 of 37

AUDI A4 2000 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-102 Read measuring value block 4 1 2 3 4 Indicated on display; note display field 4 Notes: Due to its short signal duration, shifting cannot always be observed on the VAG 1551 scan tool

Page 31 of 37

AUDI A4 2000 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-106 - Switch ignition ON. - Using VAG 1551 scan tool, select "Read Measuring Value Block" function 08, display group 027, display field 1 page 01 -249 . Read measuring value bl

Page 33 of 37

AUDI A4 2000 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-108 - Switch ignition ON. - Using VAG 1551 scan tool, select "Read Measuring Value Block" function 08, display group 027, display field 2 page 01 -249 . Read measuring value bl
Search: (service, bonnet, wheel, cruise control, tire size, jump cable)