heater AUDI A4 2000 B5 / 1.G AFC Engine Lock Carrier Removing For Service Workshop Manual

15-15

- Disconnect harness connectors for Heated
Oxygen Sensors (H02S) and oxygen sensor
heaters at engine compartment bulkhead, and
move to one side.

- Disconnect vacuum line to EGR vacuum
regulator solenoid valve at throttle body.

- Remove EGR valve from intake manifold.

- Remove hydraulic hose bracket and disconnect Ground (GND) wires
(arrow) on intake manifold.

Note:
The intake manifold has two slanting mounting surfaces to the left and - Remove bolts (arrows) and remove intake manifold.
- Seal off openings using clean cloth rags.
- Disconnect coolant line at rear of cylinder head.
Pa
ge 11 of 35 Lock carrier, removin
g for service
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.15.4