transmission AUDI A4 2000 B5 / 1.G Fuel Supply System Front Wheel Drive 1.8T And 2.8 Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 2000, Model line: A4, Model: AUDI A4 2000 B5 / 1.GPages: 49, PDF Size: 0.82 MB
Page 14 of 49
20-19
Fuel tank assembly, removing and
installing
Vehicles with front wheel drive and 1.8 ltr.
turbo or 2.8 ltr. engine
Observe Safety measures Page 20
-1 .
Observe Rules of cleanliness Page 20
-4 .
Required special tools, testing equipment
and auxiliary equipment
VAG1359/2 Universal holder
VAG1383 A Engine / transmission jack
Removing
CAUTION!
Obtain the radio Anti-theft code from the
customer before disconnecting the Battery
Ground strap.
- Disconnect Battery Ground strap with ignition switched OFF.
- Open fuel tank cover briefly and close again.
Pa
ge 14 of 49 Fuel su
pp
ly system, servicin
g (vehicles with front wheel drive and 1.8 ltr. turbo or 2.8 ltr. en
gine
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.2
Page 17 of 49
20-22
- Remove EVAP canister cover on bottom of
spare tire well Page 20
-130
.
Note:
Bleed line -2- to the EVAP canister purge regulator valve remains
connected. - Loosen hose connection -1- on bleed line to fuel filler neck.
- Unclip line out from bracket -arrow-.
- Place VAG1383A engine / transmission jack under fuel tank for
support.
- Mark installation position of clamp bands.
Note:
Arrow points in driving direction. - Remove clamp bands -1- to -4-.
- Lower fuel tank.
Pa
ge 17 of 49 Fuel su
pp
ly system, servicin
g (vehicles with front wheel drive and 1.8 ltr. turbo or 2.8 ltr. en
gine
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.2
Page 18 of 49
20-23
Installing
Installation is performed in the reverse order of
the removal procedure, during installation, note
the following:
CAUTION!
Always refer to the latest parts catalog to
ensure that you use original equipment fuel
hose clamps.
Note:
Replace all adhesive tapes removed during
disassembly in the original location during
installation.
Use VAG1921 hose clamp pliers to install
spring clamps,
Always replace sealing rings and gaskets
during installation work.
- Position fuel tank using clamp strips with
VAG1383 A engine / transmission jack on
vehicle floor pan.
- Push fuel tank all the way to the left.
Pa
ge 18 of 49 Fuel su
pp
ly system, servicin
g (vehicles with front wheel drive and 1.8 ltr. turbo or 2.8 ltr. en
gine
)
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.2