ABS AUDI A4 2000 B5 / 1.G General Trim Workshop Manual

70-76


Notes:
Function check after installing trim:

Height adjuster must audibly engage into all five
of the possible positions (even in the top
position).
Switch must return by itself to released position
after being actuated.
2 -
Anti-twist stop
3 -
Belt guide
4 -
Lower B-pillar trim
Removing:
- Remove upper B-pillar trim -1- (do not
detach three-point seat belt).
- Push back retaining tabs (2x) for B-pillar
trim at door sill.
- Remove trim -4- upward and detach from
belt guide -3-.
Installing:
Installation is the reverse of removal
5 -
Seat belt height adjuster trim
Pa
ge 5 of 16 Trim
(g
eneral
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.8

70-86

Installing

- Make sure retaining tabs -1- (2x) fully engage.
- Make sure rear lug engages in notch -6-.
Adjustment locking device -5- must point toward center of vehicle.
Pa
ge 15 of 16 Trim
(g
eneral
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.8