warning lights AUDI A4 2000 B5 / 1.G Instrument Cluster OBD From Model Year 1999 Workshop Manual

01-15

Output Diagnostic Test Mode (scan tool
function 03)


Notes:

Output Diagnostic Test Mode may only be
carried out on a stationary vehicle with the
engine off.
Trace any faults identified by the Output
Diagnostic Test Mode, replace the instrument
cluster if necessary.

The function "Output Diagnostic Test Mode"
cycles all the control elements in the
instrument cluster sequentially, if they are
installed and coded.
Concurrent testing of the display ranges of all
the analog indicators (coolant temperature
gauge, tachometer, speedometer and fuel
gauge).
Activation of the mini-check indicator lights.
Activation of the seat belt warning lamp.
Activation of the chime.
Pa
ge 18 of 74 Instrument cluster, On Board Dia
gnostic
(OBD
) (throu
gh M.Y. 1999
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.1

01-18

-
Press button.Output Diagnostic Test Mode Instrument Cluster Warning Lights Test

Indicated on display
Activation of mini-check indicator lights
-
Press button.
Output Diagnostic Test Mode Seat Belt Warnin
g Light-K19

Indicated on display
Activation of seat belt warning light.
Note:
Depending on the model/equipment, the seat belt warning light will be
activated via the control module coding. This means that the warning light
will be inactive if this test is skipped.
-
Press button.
Output Diagnostic Test Mode Chime

Indicated on display
The chime is activated and sounds continuously.
-
Press button.
Pa
ge 23 of 74 Instrument cluster, On Board Dia
gnostic
(OBD
) (throu
gh M.Y. 1999
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.1