tow AUDI A4 2000 B5 / 1.G Mechanical Throttle Control Servising

20-196

Vehicles with automatic transmission

- Slide cable with cable bracket -3- and cable mounting -1- out of the
plenum toward the front, through the firewall to the engine and
backward through the fire wall to the vehicle interior.
Arrow points in installation direction.
- Attach cable bracket with retaining clip -2- in front of firewall in the
plenum.

- Connect kick-down-switch harness connector -arrow-.
Pa
ge 11 of 18 Mechanical throttle control, servicin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.6

20-200

Vehicles with automatic transmission

All vehicles
Note:
For vehicles with a manual transmission (no kick-down switch), the clip is
located on the cable bracket behind the front plenum. - Disconnect harness connector -2- from kick-down switch.
- Remove retaining clip -1- from the kick-down switch.

-
Twist cable positioner approx. 90 in counter-clockwise direction -
arrow 1- and pull out through the firewall side of plenum in direction of -
arrow 2- toward the engine. - Remove the accelerator pedal cable.
Pa
ge 15 of 18 Mechanical throttle control, servicin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.6