belt AUDI A4 2000 B5 / 1.G Starter Workshop Manual

27-42


Note:
Before removing the ribbed belt, mark the direction of travel with chalk or
a felt tipped marker. Reversing the direction of travel of an used belt can
destroy it. When installing the belt, make sure it is correctly seated in the
belt pulleys. - Loosen mounting bolts for air conditioning compressor belt tensioner
(arrows).
- Release tension on ribbed belt and remove.
- Unbolt air conditioning compressor.
Tightening torque: 25 Nm (18 ft lb)
- Hang air conditioning compressor up on chassis with its refrigerant
lines attached.
Pa
ge 3 of 8 Starter, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.27.3

27-44

Installing
Installation is the reverse of removal; noting the
following:

Vehicles with air conditioning

- Install ribbed belt for air conditioning
compressor.

All vehicles - Place torque wrench on hex head of belt tensioner as shown and
tighten to 25 Nm (18 ft lb).
- Maintain torque on belt tensioner and tighten bolt -A- to 20 Nm (15 ft
lb).
- Start engine and make sure belt runs properly.
Pa
ge 5 of 8 Starter, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.27.3