AUDI A4 2000 B5 / 1.G Suspension User Guide

Manufacturer: AUDI, Model Year: 2000, Model line: A4, Model: AUDI A4 2000 B5 / 1.G
Pages: 14, PDF Size: 0.13 MB

AUDI A4 2000 B5 / 1.G Suspension User Guide A4 2000 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1156/w960_1156-0.png AUDI A4 2000 B5 / 1.G Suspension User Guide

Search: (hood open, jump start, towing capacity, fuel fill door release, rims, battery replacement)

Jump to page (1-14):

Load previous 10 pages

Page 11 of 14

AUDI A4 2000 B5 / 1.G Suspension User Guide 40-8

39 -
12-point socket-head bolt M10 x 20
80 Nm (59 ft lb)For vehicles with triple-rotor joint
40 -
Bolt Always replace
Note different lengths:With steel mounting bracket: M10 x 60With al

40-8

39 -
12-point socket-head bolt M10 x 20
80 Nm (59 ft lb)For vehicles with triple-rotor joint
40 -
Bolt Always replace
Note different lengths:With steel mounting bracket: M10 x 60With aluminum mounting bracket: M10 x 62
41 -
Mounting bracket Removing and installing page 40
-68
Aluminum bracket m.y. 1998 Note changes to wheel alignment pages 44
-15
and Page 44
-16

Do not mix steel and aluminum brackets
42 -
Self-locking nut Always replace50 Nm (37 ft lb) + 1/4-turn (90 )
43 -
Self-locking flanged nut
Always replace20 Nm (15 ft lb)
Pa
ge 11 of 14 Front axle com
ponents, locations
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.1

Page 12 of 14

AUDI A4 2000 B5 / 1.G Suspension User Guide 40-9
As of chassis number 8DTA 321 912, stop plates
were installed as end stops for vehicles with
sport suspension.

Note:
Do not remove the stop plates.

From m.y. 1997 ,

40-9
As of chassis number 8DTA 321 912, stop plates
were installed as end stops for vehicles with
sport suspension.

Note:
Do not remove the stop plates.

From m.y. 1997 , buffer stops are installed at the rear upper links. Fig. 1 Stop plates
A - Caps
B - Stop plate
C - Rear upper link
D - Bodywork

Rear upper link with buffer stop -A-
Note:
When replacing a rear upper link on a vehicle without a stop plate, always
install the new version of the link.
CAUTION! Fig. 2 Buffer stop
Pa
ge 12 of 14 Front axle com
ponents, locations
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.1

Page 13 of 14

AUDI A4 2000 B5 / 1.G Suspension User Guide Upper links without buffer stops are installed on vehicles with
stop plates. Do not remove the stop plate.
Pa
ge 13 of 14 Front axle com
ponents, locations
11/20/2002 htt
p://127.0.0.1:8080/audi/serv

Upper links without buffer stops are installed on vehicles with
stop plates. Do not remove the stop plate.
Pa
ge 13 of 14 Front axle com
ponents, locations
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.1

Page 14 of 14

AUDI A4 2000 B5 / 1.G Suspension User Guide 40-10

Only ribbed bolts are installed from m.y. 1998 ; this bolt can also be
installed on older models. Fig. 3 Note different tightening torques
Bolt -A- not ribbed (arrow) tightening torqu

40-10

Only ribbed bolts are installed from m.y. 1998 ; this bolt can also be
installed on older models. Fig. 3 Note different tightening torques
Bolt -A- not ribbed (arrow) tightening torque: 25 Nm (18 ft lb)Bolt -B- ribbed (arrow) tightening torque: 75 Nm (55 ft lb)
Pa
ge 14 of 14 Front axle com
ponents, locations
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.1

Page: < prev 1-10 11-20

Search: (adblue reset, fuse box location, radio antenna, wheel bolts, heater, fuel fill door release)