display AUDI A4 2001 B5 / 1.G 01V Transmission Output DTM Workshop Manual

01-166

Test sequence

- Connect VAS 5051 tester or V.A.G 1551 scan
tool and enter address word 02 for "Control
module for Transmission electronics" page
01
-40
.

Ignition must be switched off during this
process. Rapid data transfer
HELP
Select function XX

Indicated on display:
- Press keys 0 and 3. (03 selects the function "Output Diagnostic Test
Mode").
Rapid data transfer
Q
03 - Output Dia
gnostic Test Mode

Indicated on display
- Press Q- button to confirm entry.
Output Diagnostic Test Mode
-
Solenoid valve 1 -N88

Indicated on display
-
Valve is activated (clicks). To switch to next actuator press key.- If valve does not click, perform electrical check Page 01
-273
.
Malfunction is stored in DTC memory, see DTC table Page 01
-45
.
Pa
ge 5 of 18 Out
put Dia
gnostic Test Mode
(DTM
) (scan tool function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.10

01-167

Output Diagnostic Test Mode
-
Solenoid valve 2 -N89

Indicated on display
-
Valve is activated (clicks) To switch to next actuator press key.- If valve does not click, perform electrical check Page 01
-273
.
Output Diagnostic Test Mode
-
Solenoid valve 3 -N90

Indicated on display
Malfunction is stored in DTC memory, DTC table Page 01
-45
. -
Valve is activated (clicks). To switch to next actuator press key.
- If valve does not click, perform electrical check Page 01
-273
.
Output Diagnostic Test Mode
-
Selector lever lock solenoid -N110

Indicated on display
-
Solenoid is activated (clicks). Switch to next actuator press key.- If solenoid does not click, perform electrical check Page 01
-273
.
Malfunction is stored in DTC memory, DTC table Page 01
-45
.
Pa
ge 6 of 18 Out
put Dia
gnostic Test Mode
(DTM
) (scan tool function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.10

01-168

Output Diagnostic Test Mode
-
Solenoid valve 4 -N91

Indicated on display
Electrical malfunctions will be stored in DTC memory. See DTC table
Page 01
-45
. -
Valve is activated (clicks). To switch to next actuator press key.
Output Diagnostic Test Mode
-
Solenoid valve 5 -N92

Indicated on display
Electrical malfunctions will be stored in DTC memory. See DTC table
Page 01
-45
. -
Valve is activated (clicks). To switch to next actuator press key.
Output Diagnostic Test Mode
-
Solenoid valve 6 -N93

Indicated on display
Electrical malfunctions will be stored in DTC memory. See DTC table
Page 01
-45
. -
Valve is activated (clicks). Switch to the next actuator press key.
Pa
ge 7 of 18 Out
put Dia
gnostic Test Mode
(DTM
) (scan tool function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.10

01-169

Output Diagnostic Test Mode
-
Solenoid valve 7 -N94

Indicated on display
Electrical malfunctions will be stored in DTC memory. See DTC table
Page 01
-45
. -
Valve is activated (clicks). To switch to next actuator press key.
Output Diagnostic Test Mode
-
Kick-down switch -F8

Indicated on display
Notes:

It is not the kick-down switch -F8-, but the switch-off function for the air
conditioner in transmission control module -J217- which is activated. If the kick-down switch is operated, the Transmission Control Module
(TCM) grounds the output to air conditioner. This briefly switches off
the air conditioner compressor. Can be disregarded here. The signal can be checked in measured value block 011 01
-186
.
For checking function of Kick-down switch -F8- Page 01
-273

Electrical check.
-
Press key to switch to the next actuator.
Pa
ge 8 of 18 Out
put Dia
gnostic Test Mode
(DTM
) (scan tool function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.10

01-170

Output Diagnostic Test Mode
-
Solenoid valve relays

Indicated on display
-
Solenoid valves activated in position "P" are activated (click), press
key to switch to the next actuator.
Can be disregarded.
-
Press key.
Output Diagnostic Test Mode
-
End

Indicated on display
-
Press key
Function is unknown or cannot be performed at this time

Indicated on display
-
Pressing the key will terminate the Output Diagnostic Test Mode.
Rapid data transfer
HELP
Select function XX

Indicated on display:
- To repeat Output Diagnostic Test Mode, the ignition must be switched
off and then on again. Now select function 03 - Output Diagnostic Test
Mode again.
Pa
ge 9 of 18 Out
put Dia
gnostic Test Mode
(DTM
) (scan tool function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.10

01-173

Test sequence

- Connect VAS 5051 tester or V.A.G 1551 scan
tool and enter address word 02 for "Control
module for transmission electronics" page 01
-
40
.
Ignition must be switched off during this process. Rapid data transfer
HELP
Select function XX

Indicated on display:
- Press keys 0 and 3. (03 selects function "Output Diagnostic Test
Mode").
Rapid data transfer
Q
03 - Output Dia
gnostic Test Mode

Indicated on display
- Confirm entry with Q button.
Output Dia
gnostic Test Mode
(DTM
)
Shift valve 1 Solenoid Valve 1 -N88

Indicated on display:
-
Valve is activated (clicks), to switch to the next actuator press key.- If valve does not click, perform electrical check Page 01
-273
.
Malfunction is stored in DTC memory, see DTC table Page 01
-45
Pa
ge 12 of 18 Out
put Dia
gnostic Test Mode
(DTM
) (scan tool function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.10

01-174

Output Dia
gnostic Test Mode
(DTM
)
Shift valve 2 Solenoid Valve 2 -N89

Indicated on display:
-
Valve is activated (clicks) To switch to next actuator press key.- If the valve does not click, perform electrical check Page 01
-273
.
Malfunction is stored in DTC memory, see DTC table Page 01
-45
Output Dia
gnostic Test Mode
(DTM
)
Shift valve 3 Solenoid Valve 3 -N90

Indicated on display:
-
Valve is activated (clicks). To switch to the next actuator press key.- If valve does not click, perform electrical check Page 01
-273
.
Malfunction is stored in DTC memory, see DTC table Page 01
-45
Output Dia
gnostic Test Mode
(DTM
)
Shift lock Solenoid -N110

Indicated on display:
- Solenoid is activated (clicks). To switch to the next actuator press
key. - If solenoid does not click, perform electrical check Page 01
-273
.
Malfunction is stored in DTC memory, DTC table Page 01
-45Pa
ge 13 of 18 Out
put Dia
gnostic Test Mode
(DTM
) (scan tool function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.10

01-175

Output Dia
gnostic Test Mode
(DTM
)
Press. control valve -1- for auto. trans. -N215

Indicated on display:
- Pressure control valve -N215- is activated (clicks). To switch to the
next actuator press key.
Electrical malfunctions will be stored in DTC see DTC table Page 01
-45
.
Output Dia
gnostic Test Mode
(DTM
)
Press. control valve -2- for auto. trans. -N216

Indicated on display:
- Pressure Control valve -N216- is activated (clicks). To switch to the
next actuator press key.
Electrical malfunctions will be stored in DTC, see DTC table Page 01
-45
.
Output Dia
gnostic Test Mode
(DTM
)
Press. control valve -3- for auto. trans -N217

Indicated on display:
- Pressure Control valve -N217- is activated (clicks). To switch to the
next actuator press key.
Electrical malfunctions will be stored in DTC, see DTC table Page 01
-45
.
Pa
ge 14 of 18 Out
put Dia
gnostic Test Mode
(DTM
) (scan tool function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.10

01-176

Output Dia
gnostic Test Mode
(DTM
)
Press control valve -4- for auto. trans. -N218

Indicated on display:
Note: - Pressure Control valve -N218- is activated (clicks) To switch to next
actuator press key.
Electrical malfunctions will be stored in DTC memory, see DTC
table Page 01
-45

Output Dia
gnostic Test Mode
(DTM
)
Press reg. valve -5- for auto trans. -N233

"Pressure Regulating Valve -5- for Automatic Transmission -N233-" could
now be displayed erroneously due to a software error, even though it
does not exist. Disregard this display. Press button to switch to the next
actuator.
Output Dia
gnostic Test Mode
(DTM
)
Voltage supply for solenoid valves

Indicated on display:
Solenoid valves activated in position "P" are activated (click). Press key
to switch to the next actuator.
Can be disregarded.
-
Press key.
Pa
ge 15 of 18 Out
put Dia
gnostic Test Mode
(DTM
) (scan tool function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.10

01-177

Function is unknown or cannot be carried out at the moment

Indicated on display
-
Pressing the key will terminate Output Diagnostic Test Mode.
Rapid data transfer
HELP
Select function XX

Indicated on display:
- To repeat Output Diagnostic Test Mode, switch ignition off and then on
again. Now select function 03 - Output Diagnostic Test Mode again.
Pa
ge 16 of 18 Out
put Dia
gnostic Test Mode
(DTM
) (scan tool function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.10