load AUDI A4 2004 B6 / 2.G RNS_E Navigation System Manual

General system operation 22
Applies to vehicles: with multi-function steering wheel with audio operation - version AMulti-function steering wheel with audio operation - version A
Press the
button
Radio
Select the next station
on the radio station
list
a).
CD or MP3
Select the next track
for the audio source
you are listening to.
Pres s an d h old
the button
CD or MP3
Fast forward
Press the
button
Radio, CD or
MP3
Increase volume
Press the
button
Radio, CD or
MP3
Reduce volume
Press the
button
Radio
Frequency scan
CD
Load the previous CD
if CD changer* is
installed
MP3
Switch to previous
available MP3 drive
Press the
button
Radio
Frequency scan
CD
Load the ne xt CD if CD
changer* is installed
MP3
Switch to next avail-
able MP3 drive
a)If the radio memory list is shown in the Navigation System display, a radio
station can be selected from the list using the left menu thumbwheel.Button
Function
description
Operating
mode
Application
AB

AB

AC

AD

AE

AF

Fig. 17 Multi-function
steering wheel with
audio operation
(version A)

Drives 34DrivesIntroductionSystem drives
The navigation DVD, audio CDs or MP3 CDs compatible
with the equipment can be loaded into the DVD navi-
gation drive.–Press the button
page 12, f i g .4 t o o p e n o r c l o s e t h e
display. The drives are located behind the display

fig.30.The following drives are integrated in the Navigation System.
DVD navigation drive
page 35
Two MP3 card readers for SD or MMC memory cards
page 40
Tips
An MP3 CD is a CD ROM on which MP3 files are stored.
Fig. 30 Display open:
DVD drive and MP3
card reader


A1A

Drives35
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Applies to vehicles: with CD changerCD changerFor technical reasons there are two different CD changers which are
not available for all models.


Audi cd changer* in glove compartment
fig.31


CD changer with cartridge* in trunk
fig.32
Th e differences in operation of the external CD changer are limited
to the different procedure when loading the CDs into the changer.
Tips
The CD changers are available as factory equipment.DVD navigation driveGeneralThe DVD navigation drive
page 36, fig.33 can read and play the
n a v i g a t i o n DV D, a u d i o CD s (C D- A ) a n d M P 3 C Ds c o m p a t i b l e w it h t h e
equipment.
An a ud i o C D (C D- A ) i n s e r t e d i n t h e d ri v e is p l a ye d u s in g t h e C D f un c -
tion
page 78. An MP3 CD ins er ted in the drive is played using the
MP3 function
page 83.
Important tips for handling the different data carriers can be found
starting on
page 48.
Tips
Navigation DVDs can be purchased from an Audi dealer. The dealer
can also provide you with information about navigation DVD
updates.
Fig. 31 Audi cd
changer in glove
compartmentFig. 32 CD changer
with cartridge in trunk

Drives 36Loading navigation DVD– Press the button to open the display.
– Hold the navigation DVD by the hole in the center and the
outer edge
page 51, fig.52.– G ui de t h e n a vi g a t i o n DV D s t ra i g h t ( l a be l s i de u p) i n to t h e
drive . The navigation DVD is pulled in automatically.
Before in ser ting the n avigation DVD, check to make sure the re is n o
DVD/CD already in the drive. If there is a DVD/CD in the drive, push
the Eject button and remove the DVD/CD
page 37.
The navigation DVD should never be forced into the drive. The navi-
gation DVD is pulled in automatically.
If you are shown the message Please check navigation DVD in the
display, you cannot use the Navigation function. Possible reasons
are described starting on
page 51.
If you are shown the message Navigation is being initialized in the
display, navigation is in the start phase. As soon as this message
disappears and a navigation menu is displayed, you can use the
navigation feature.
Tips
To ensure problem-free operation, you should use only a clean,
unscratched and undamaged navigation DVD. You can find addi-
tional hints starting on
page 48.
Fig. 33 Display open:
DVD navigation driveFig. 34 Display open:
Inserting navigation
DVD into the drive


A2
A1

Drives 38For compressing MP3 files we recommend a bit rate of at least 160
kbit/s.
In the case of MP3 files with a variable bit rate, there may be a
discrepancy between play time displayed and the real time.
If various types of information (artist, album, track name, and so on)
a re to b e d i s p l a y e d , a n I D 3 t a g m us t b e a t t a che d to t h e M P 3 fi l e . Th e
MP3 player supports Versions 1 and 2 of ID3 tags. The display of
artist and track name is limited to a total of 64 characters maximum.
The Navigation System recognizes playlists and can play MP3 files
in the sequence established there. The structure of the playlists
must conform to m3u format. The file names must have the exten-
sion “.m3u”.
Tips
Because of the diversity of CD-R/CD-RW blanks and their different
storage capacities, function may be limited with individual storage
media.
Loading CD
M P3 C Ds a n d a u d i o C D s c a n a ls o b e p la y e d i n t h e DV D
navigation drive.
Fig. 36 Display open:
DVD navigation driveFig. 37 Display open:
Inserting CD into the
drive

Drives 38For compressing MP3 files we recommend a bit rate of at least 160
kbit/s.
In the case of MP3 files with a variable bit rate, there may be a
discrepancy between play time displayed and the real time.
If various types of information (artist, album, track name, and so on)
a re to b e d i s p l a y e d , a n I D 3 t a g m us t b e a t t a che d to t h e M P 3 fi l e . Th e
MP3 player supports Versions 1 and 2 of ID3 tags. The display of
artist and track name is limited to a total of 64 characters maximum.
The Navigation System recognizes playlists and can play MP3 files
in the sequence established there. The structure of the playlists
must conform to m3u format. The file names must have the exten-
sion “.m3u”.
Tips
Because of the diversity of CD-R/CD-RW blanks and their different
storage capacities, function may be limited with individual storage
media.
Loading CD
M P3 C Ds a n d a u d i o C D s c a n a ls o b e p la y e d i n t h e DV D
navigation drive.
Fig. 36 Display open:
DVD navigation driveFig. 37 Display open:
Inserting CD into the
drive

Drives41
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Loading a memory card
The Navigation System contains two MP3 card
readers.
– Press the button to open the display
page 39,
fig.38.
– Insert the memory card with the label side up (contact
surface down) into the card reader slot
fig.39. The
missing corner of the memory card must point to the
front right as seen in the direction of travel
fig.40.
– Then push the memory card into the slot until you feel it
click into place. The memory card is flush with the area
around it.I f t h e m e m o r y c a r d h a s b e e n l o a d e d c o r r e c t l y, t h e f o r m a t t e d s t o r a g e
capacity of the card is displayed in the open display. In addition, the
file format “MP3”, or possibly the date carrier name, is displayed if
MP3 audio files have been stored on the card and they can be read
by the MP3 player.
As long as the message “Reading card...Please do not remove”
appears in the display, the memory card must not be removed from
the drive. If the memory card is removed from the drive, there is a
possibility that the data will be destroyed. In this case, the memory
card can no longer be read and must be formatted.
If a memory card has been inserted and not played, the data from
the ID3 tag s are re ad in the b ackground. If you star t playback of the
memory card immediately, the ID3 tag data are displayed for the
track being played.
Note
Use only single-piece SD/MMC memory cards. If you use SD/MMC
adapter cards (multi-piece memory cards), the memory card can
become detached from the adapter as the result of vibration while
driving. There is a possibility that individual pieces may become
stuck in the drive.
Fig. 39 Display open:
Inserting a memory
card.Fig. 40 Display open:
Position of the
SD/MMC card during
loading


A2

Drives43
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
CD changerApplies to vehicles: with Audi cd changerLoading your CDs into the CD changerLoading just one CD
– Press the button . As soon as the CD changer
is ready for you to load a CD, the red LEDs on the inside
sides of the CD tray (not shown in the illustration)
start to blink.
– Insert the CD (printed side up and straight) into the CD
tray . The CD automatically loads into the next free slot
in the CD changer. The LED in the button will stop
blinking.Loading all CDs
– Press and hold the button for longer than 2
seconds.
– Wait until the red LEDs on the inside sides of the CD tray
(not shown in the illustration) start to blink.
– Now insert your other CDs (printed side up and straight)
o n e a t a t i m e i n t o t h e C D t r a y . Th e L E D s i n e a ch b u t t o n
will stop blinking once a CD has been loaded into the
slot.
Loading the CD into a specific empty slot
– Press the button . The LED in the button of
any empty slot will start to blink.
– If you want to load a CD into a specific slot, you can also
p r e s s a b u t t o n , w h e r e t h e L E D i s not lit a n d i n s e r t y o u r
CD.
– Wait until the red LEDs on the inside sides of the CD tray
(not shown in the illustration) start to blink.
– Now insert your CDs (printed side up and straight) into
the CD tray .
Loading the CD into a specific slot
– Press the button . The LEDs in the buttons
for the slots that already have CDs loaded blink.
– If you press an illuminated button that is not blinking
then that CD will be ejected.
– Remove the ejected CD from the CD tray .
Fig. 42 Audi cd
changer: Loading CDs
LOA D
A2
A;
A;
A3
LOA D
A2
A1
A;
A3
LOA D
A2
A
A3
A1
A;LOA D
A2
A A3
A1

Drives 44
– Insert a CD that you want to load, label up, into the CD
tray .If you press the button again while you are loading all CDs,
the loading process will be interrupted.
Make sure you load your CDs label side up and straight page 43, fig.42.
The CDs should never be forced into the slot. The CD will be pulled
into the CD changer automatically.
Aft e r a C D h as b e e n l o a d e d in to t h e CD ch a n g e r, yo u s h o u ld w a i t fo r
a moment until the red L ED on the inside side o f the tray blinks. The
CD tray is then ready to be loaded with the next CD.
If you choose a slot which already has a CD loaded in it, the CD will
be ejected. Remove the CD, and insert the new CD you want to have
in this slot.
I f yo u w a i t l o n g e r t h a n 3 0 s e c o n d s w i th o u t r e mo v in g t h e CD, th e C D
will be pulled back into the CD changer automatically.Tips


The CD is played through the main CD/SD function
page 78.


If you have accidently ins er ted a CD upside down (with the label
side facing down), the Display will show a read-error-message.


Never force the CDs into the CD tray. The CD will be pulled into
the CD changer automatically.


Do not use any non circular CDs (for example, Shape CDs)
page 49.
Applies to vehicles: with Audi cd changerEjecting CDsEjecting a CD
– Press the CD EJECT button
fig.43.
– Press the button (LED on) to eject an individual CD, or
– Press the CD EJECT button again to eject the CD you
are playing.
Ejecting all CDs
– Hold down the button for more than two seconds. All
CDs that are currently in the CD changer will be ejected.
Note

Always keep your CDs in their original cases to protect them
from dirt, dust, scratches or other damage.
A1
LOAD
A1
Fig. 43 Audi cd
changer: Ejecting CDs
A1A2A2
A1

Drives 46Removing and inserting the magazineYou can load and remove the CD magazine with the Naviga-
tion System switched on or off.
Removing the magazine from the CD changer
– Slide the changer door open
fig.46.
– Press the cartridge eject button
fig.46. The maga-
zine automatically comes out.
– Remove the magazine .
Inserting the magazine in the CD changer
– Open the sliding door of the CD slot
fig.46.
– Slide the magazine all the way in with the inscription
“disc” on top. While doing this, the arrow on the maga-
zine must point towards the magazine slot
fig.46.– Close the changer door .
After inserting the magazine, you will hear a “working noise” from
t h e CD c ha n g e r. Th e d e v i c e i s s im p l y c o u n t i n g h o w ma ny C Ds a r e i n
the changer.
If there is no magazine in the CD changer, a read error is shown in
the display.
Fig. 46 CD changer
with magazine
A1
A2
A3
A;
A1