Discoverability AUDI A4 2008 B8 / 4.G Infotainment MMI Operating Manual

Bluetooth car telephone kit27
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
various steps, depending on the mobile phone you are
using.
– Make sure that Bluetooth and access to your SIM card are
activated on your mobile phone. Discoverability must be
activated on your mobile phone.
– Press the button on the MMI control console. The
MMI display will show the message Please connect your
mobile phone or insert the SIM card in the handset.
– Turn the rotary pushbutton to Find new mobile phones

page 26, fig. 17 and press the rotary pushbutton. The
available Bluetooth mobile phones are shown in the MMI
display.
– Turn the rotary pushbutton to select a mobile phone and
press the rotary pushbutton. A 16-digit PIN number

page 26, fig. 18 will appear in the MMI display.
– To enter the 16-digit PIN shown in the display, select
Accept PIN
page 26, fig. 18. Enter this PIN number on
the mobile phone while the vehicle is stationary. You will
usually be given about 30 seconds to complete the entry.
– To enter any other 16-digit PIN, select Enter other PIN

page 26, fig. 18. Enter any 16-digit PIN code via the
speller
page 43. Then enter this 16-digit PIN on the
mobile phone while the vehicle is stationary. You will
usually be given about 30 seconds to complete the entry.
– Confirm the bonding process on the mobile phone when
prompted to do so. The SIM card symbol
page 29,
fig. 21 will appear in the status line of the MMI display
when the mobile phone has successfully bonded.
– Enter the PIN code for your SIM card.Note
•You can delete stored Bluetooth devices using the function
Delete external Bluetooth devices
page 96.
•For up-to-date information on mobile phones with the SIM
Access Profile, please ask an Audi dealer or specialist retailer.
Applies to vehicles: with Bluetooth car telephone kit and handset
Bonding a handset
The factory-fitted handset is already bonded to the car
telephone kit.
You may have to bond the handset to the car telephone kit
if the connection is not established automatically. The
bonding procedure is started from the handset.
–Set Discoverability to on for the bonding process

page 96.
– Select Veh. base station on the handset
fig. 19.
– Press the control button for OK on the handset. The avail-
able vehicle base station will be displayed (e.g. “AUDI
BTA”)
page 156.
TEL
A1
Fig. 19 Handset: Scan-
ning for vehicle base
station











Bluetooth car telephone kit 28
– Using the handset, select the desired vehicle base
station (e.g. “AUDI BTA”).
– Press the control button for Conn. on the handset.
–On the MMI, select Ye s to confirm the prompt PIN entry
required. Connect? A PIN number
page 26, fig. 18 will
appear in the MMI display.
– To enter the 16-digit PIN shown in the display, select
Accept PIN
page 26, fig. 18. Enter this PIN number on
the handset while the vehicle is stationary. You will be
given about 30 seconds to complete the entry.
– To enter any other 16-digit PIN, select Enter other PIN

page 26, fig. 18. Enter any 16-digit PIN code via the
speller
page 43. Then enter this 16-digit PIN on the
handset while the vehicle is stationary. You will be given
about 30 seconds to complete the entry.
– Press the control button for OK on the handset.
The exact name of the Bluetooth-capable base station on your
vehicle (e.g. “AUDI BTA”) can be retrieved using the Bluetooth name
function
page 96.
Note
The handset can be deleted from the list of Bluetooth devices

page 96.
Applies to vehicles: with Bluetooth car telephone kit
Bonding a mobile phone with Hands-Free
Profile
The bonding procedure is started on the mobile phone.
The mobile phone must be bonded to your car telephone kit
(this only has to be done once). This procedure involves
various steps, depending on the mobile phone you are
using.
– Switch on the ignition and the MMI (if not already acti-
vated).
–Set Discoverability to on for the bonding process

page 96.
– Select the appropriate menu option on your mobile
phone to search for Bluetooth compatible devices.
– Connect the mobile phone to the car telephone kit. When
the car telephone kit is detected, you will see the name
“AUDI BTA” on your mobile phone.
Fig. 20 Mobile phone
with Hands-Free Profile
bonded and connected











Using the telephone 96
Switching between calls*13)
You can switch between two phone calls (one of them will be on
hold at any given time). The MMI display shows the active call, the
call on hold and the length of time for the connection.
Press the control button for End call to end whichever call is
currently active. The call on hold will remain in the hold queue.
Conference calling*
13)
Up to five callers can take part in a conference (depending on the
network service).
Select Join conference
page 95, fig. 89 to set up a conference. The
call on hold and the active call are added to the conference.
To set up a further call, select Hold to place all the members of an
existing conference on hold. Then press the control button for
Options or the button on the control console to close the
Options menu. Now enter a telephone number using the speller

page 90, fig. 83. Select OK or Dial to start dialling. To add this
caller to the existing conference, select Conference.
Select Resume if you want to retrieve all callers of an existing
conference from the hold queue. The Show conference participants

page 95, fig. 90 option allows you to display the callers.
Note
•The option Call waiting must be activated for you to be made
aware of incoming calls during a conversation
page 97. This
option depends on your mobile network service provider.
•The options available during a call may vary depending on the
mobile network service provider.
Applies to vehicles: with Bluetooth car telephone kit
Telephone settings
– Select: Function selector button > function selector
button > Telephone settings.
Set ring tone*14)
The selected ring tone is played and is stored when you close the
submenu.
Bluetooth settings*
•Search for mobile phone*14) - to find and list any Bluetooth
mobile phones within range.
•Bluetooth devices - to display a list of Bluetooth devices bonded
to the MMI system. The Bluetooth symbol marks the Bluetooth
device which contains the SIM card and which is actively connected.
•Delete ext. Bluetooth dev. - to delete all bonded mobile phones.
Bonded handsets* (e.g. “AUDI BTHS”) have to be deleted one at a
time. To delete bonded Bluetooth devices one at a time, choose a
device and select Delete this device.
•Bluetooth name - to change the name of the vehicle base station
on your car telephone kit (“AUDI BTA”).
•PIN for handsfree mode15) - to change the factory default (1234).
This PIN number has to be entered when you bond a mobile phone
with the Hands-Free Profile
page 28.
•Discoverability - to switch the car telephone discoverability on or
off. This setting determines whether the vehicle base station can be
detected by a mobile phone or handset*. If you select auto, the
vehicle base station can be discovered by mobile phones or the
handset* for a period of about five minutes while the car is
stationary and the key is in the ignition. Discoverability is switched
off after this period. Mobile phones which have already been
bonded can connect via Bluetooth even when discoverability is
RETURN
14)Applies to mobile phones with SIM Access Profile.15)Applies to mobile phones with Hands-Free Profile.
TEL
SETUP





!




Index185
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control MMI control console . . . . . . . . . . . . . . . 63
Multi-function steering wheel . . . . . . 130
Naming CDs . . . . . . . . . . . . . . . . . . . . . . 67
On-board handbook . . . . . . . . . . . . . . . 50
Repeating CD . . . . . . . . . . . . . . . . . . . . . 68
Selecting CD (CD changer) . . . . . . . . . . 13
Selecting CD (MMI control console) . . 64
Selecting CD (speech dialogue system) .
175
Speech dialogue system . . . . . . . . . . . 175
Text display . . . . . . . . . . . . . . . . . . . . . . 68
CD changer . . . . . . . . . . . . . . . . . . . . . . . . . 12
Channel following
DVB-T . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Channel list (TV)
Selecting channel (MMI control console)
72
Selecting channel (multi-function steering
wheel) . . . . . . . . . . . . . . . . . . . . . . . . . 132
Cleaning and care
CD/DVD . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . 30
MMI control console . . . . . . . . . . . . 10, 30
Commands (speech dialogue system)
SeeName tags (speech dialogue system)
172
Commands (telephone speech control sys-
tem)
SeeName tags (speech control system) .
164
Conference calling
Handset . . . . . . . . . . . . . . . . . . . . . . . . . 149
MMI control console . . . . . . . . . . . . . . . 95
Control button . . . . . . . . . . . . . . . . . . . . . . . 41Controls and displays
MMI control console . . . . . . . . . . . . . . . 41
Multi-function steering wheel . . . . . . 128
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Copying from last destination . . . . . . . . . . 84
D
Data services (DAB-INFO) . . . . . . . . . . . . . . 61
Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Default settings
Handset . . . . . . . . . . . . . . . . . . . . . . . . . 155
MMI control console . . . . . . . . 51, 96, 101
Deleting directory entries . . . . . . . . . . . . . . 86
Deleting last calls
Handset . . . . . . . . . . . . . . . . . . . . . . . . . 152
MMI control console . . . . . . . . . . . . . . 100
Demo mode . . . . . . . . . . . . . . . . . . . . . . . . 120
Destination, entering . . . . . . . . . . . . . . . . 105
Avoiding route . . . . . . . . . . . . . . . . . . . 118
Changing route plan . . . . . . . . . . . . . . 117
Entering NAV start location . . . . . . . . 120
From map . . . . . . . . . . . . . . . . . . . . . . . 109
Loading from directory . . . . . . . . . . . . 115
Loading last destination . . . . . . . . . . . 114
Loading route . . . . . . . . . . . . . . . . . . . . 115
Loading top categories . . . . . . . . . . . . 114
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Route plan . . . . . . . . . . . . . . . . . . . . . . 108
Setting destination from map . . . . . . 109
Single destination . . . . . . . . . . . . . . . . 107
Speech dialogue system . . . . . . . . . . . 178Dialling telephone number
Handset . . . . . . . . . . . . . . . . . . . . . . . . . 145
MMI control console . . . . . . . . . 90, 91, 94
Multi-function steering wheel . . . . . . 134
Speech control system . . . . . . . . . . . . 163
Speech dialogue system . . . . . . . . . . . 177
Digital radio . . . . . . . . . . . . . . . . . . . . . . . . . 53
Directory
MMI control console . . . . . . . . . . . . . . . 91
Multi-function steering wheel . . . . . . 133
Discoverability . . . . . . . . . . . . . . . . . . . . . . . 96
Display
SeeDriver information system . . . . . . 128
SeeHandset display . . . . . . . . . . . . . . . 142
SeeMMI display . . . . . . . . . . . . . . . . . . . 42
Display settings (TV) . . . . . . . . . . . . . . . . . . 77
Displaying next report . . . . . . . . . . . . . . . 122
Driver information system . . . . . . . . . . . . 128
DSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
DSP Bang & Olufsen . . . . . . . . . . . . . . . . . . 48
DTMF tones
Handset . . . . . . . . . . . . . . . . . . . . . . . . . 149
MMI control console . . . . . . . . . . . . . . . 90
Dual channel sound (DVB-T) . . . . . . . . . . . . 77
Dynamic navigation . . . . . . . . . . . . . . . . . 117
E
Editing (directory) . . . . . . . . . . . . . . . . . 85, 86
Electronic Programme Guide . . . . . . . . . . . 76
Emergency calls
Handset . . . . . . . . . . . . . . . . . . . . . . . . . 147
MMI control console . . . . . . . . . . . . . . . 89