ECU AUDI A4 2008 B8 / 4.G Infotainment MMI Operating Manual

Phone pre-installation21
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Applies to vehicles: with phone pre-installation
Inserting and removing a mobile phone
Important: A mobile phone adapter must be installed

page 20.
Inserting
– Place the mobile phone in the adapter
fig. 12.
– Press the mobile phone into the adapter until it locks into
place.
Removing
– Press the release button
fig. 13.– Lift the mobile phone out.
Should you insert the mobile phone into the adapter or remove it
during a call, the audio output or the connection may be inter-
rupted.
WARNING
Always make sure that the mobile phone is properly engaged. In
the event of an accident, a mobile phone which is not securely
fitted could be flung out of the adapter unit and injure the driver
or passengers.
Caution
The mobile phone could possibly be damaged if it is not properly
inserted in the adapter and falls out when driving.
Note
•When you insert the mobile phone in the adapter the connection
is established via the interface in the adapter set; the Bluetooth
connection is then cancelled
2).
•If you use mobile phones in the vehicle this can generate electro-
magnetic fields.
−For this reason, you should always operate mobile phones
with an external aerial. This also applies to mobile phones used
in Bluetooth mode. The external aerial directs the electromag-
netic fields to the exterior, which reduces the field strength in the
vehicle interior.
−If retrofitting an external aerial, please ensure that it is
installed correctly.
Fig. 12 Inserting
mobile phone in
adapter
Fig. 13 Removing
mobile phone from
adapter
AB2)Some adapter sets do not end the Bluetooth connection.











Television 78
Some TV channels have programmes available in dual channel
sound. Example: The programme is broadcast in a German version
on Channel A, and in an English version on Channel B.
Which version (e.g. German/English, stereo/mono) is available on
which channel depends on the TV broadcasting station.
Applies to vehicles: with analog TV and DVB-T
TV standard
– Select: Function selector button > source TV >
function selector button > TV standard.
TV standard a)Valid for the following countries
Default settingTV settings depend on original export country.
EuropeAbu Dhabi, Afghanistan, Albania, Algeria, Aus-
tria, Azores, Bahrain, Bangladesh, Belgium, Bhu-
tan, Bosnia and Herzegovina, Brunei, Cameroon,
Croatia, Cyprus, Denmark, Dubai, Finland, Ethio-
pia, Fiji, Germany, Ghana, Greenland, Iceland,
India, Indonesia, Israel, Jordan, Kenya, Kuwait,
Liberia, Liechtenstein, Macedonia, Malawi,
Malaysia, Maldives, Malta, Montenegro, Near
East, Netherlands, Norway, Oman, Portugal, Qua-
tar, Saudi Arabia, Singapore, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Thailand, Turkey
ItalyItaly
UK / IrelandFalkland Islands, Hong Kong, Ireland, UK/North-
ern Ireland
Eastern Europe
SECAMArmenia, Azerbaijan, Belarus, Bulgaria, CIS,
Congo, Kazakhstan, Kirgistan, Latvia, Lithuania,
Moldavia, Mongolia, Tajikistan, Turkmenistan,
Ukraine, Uzbekistan
MEDIA
SETUP
FranceFrance, Luxembourg, Monaco
North AmericaAntilles, Barbados, Belize, Bermuda, Bolivia, Can-
ada, Chile, Columbia, Costa Rica, Cuba, Domini-
can Republic, Ecuador, El Salvador, Guam,
Guatemala, Guyana, Haiti, Honduras, Jamaica,
Mexico, Montserrat, Nicaragua, Okinawa, Pan-
ama, Peru, Philippines, Puerto Rico, Samoa,
South America, South Korea, Surinam, Taiwan,
Trinidad & Tobago, USA, Venezuela
AustraliaAustralia
BrazilBrazil
ArgentinaArgentina
New ZealandNew Zealand
Eastern Europe
PA LCzech Republic, Hungary, Poland, Rumania
ChinaChina, North Korea
Africa PALAngola, Botswana, Gambia, Guinea-Bissau,
Lesotho, Macao, Namibia, South Africa
Greece, EgyptEgypt, Greece, Iran, Iraq, Lebanon, Mauritania,
Mauritius, Middle East, North Africa
Africa SECAMAfrica, Burkina Faso, Burundi, Central African
Republic, Chad, French overseas territories,
Dahomey, Djibouti, Gabon, Guadeloupe, Guinea,
Ivory Coast, Madagascar, Mali, Niger, Reunion,
Ruanda, Senegal, Togo, Upper Volta, Zaire
JapanJapan
TV standard a)Valid for the following countries










Using the telephone 98
•off - a number is not redialled automatically if the line is
engaged.
Auto call answer
•on - an incoming call is answered automatically shortly after it is
received.
•off - an incoming call is not answered automatically.
Note
The call options depend on your mobile network service provider.
Applies to vehicles: with Bluetooth car telephone kit
Security settings
– Select: Function selector button > function selector
button > Security settings.
Automatic PIN recognition
•on - to save the PIN code of the SIM card the first time you enter
it on the MMI. In this case, you don't have to enter the PIN code
every time your mobile phone reconnects via Bluetooth. You can
save the PIN codes of four different SIM cards on the MMI.
•off - to delete all PIN numbers already stored on the MMI.
PIN query
•Activate PIN query - the telephone system asks for the PIN every
time you switch it on. If Automatic PIN recognition is activated, the
system does not ask you to enter the PIN explicitly.
•Deactivate PIN query - the telephone system does not ask for the
PIN when you switch it on. The Automatic PIN recognition setting is
ignored in this case. Some SIM cards do not allow the PIN query to
be deactivated.Changing PIN code
First enter the existing PIN code for your SIM card. The PIN can only
consist of numbers from 0 to 9. The new PIN has to be entered twice,
as a precautionary measure, and is stored on the SIM card.
If you change the PIN when the SIM card is in a connected mobile
phone with SIM Access Profile, you will have to enter the PIN again
on the mobile phone after the Bluetooth connection between the
car telephone kit and the mobile phone is terminated. Otherwise
you will not be available.
Call barring
The call barring function requires a password. You can obtain the
password from your mobile network service provider.
•Bar outgoing calls - to set up access restrictions for outbound
calls.
•Bar incoming calls - to set up access restrictions for inbound
calls.
•Deactivate call barring (all) - to cancel all restricted access
settings.
Note
The call barring options depend on your mobile network service
provider.
Applies to vehicles: with Bluetooth car telephone kit
Mailbox number
– Select: Function selector button > function selector
button > Mailbox number.
Enter the mailbox number using the speller and select OK to store it.
To delete the mailbox number, select Del in the speller and confirm
with OK.
TEL
SETUP
TEL
SETUP










Menus 156
Button
page 140, fig. 124 switches the handset on/off.
Te l e p h o n e
•Ring tone - the selected ring tone is played and the setting is
automatically stored when you close the submenu.
•Ring tone volume - the ring tone is played at the selected volume
and the setting is automatically stored when you close the
submenu.
•Brightness - to set the brightness of the handset display.
•Language - select Menu language (German, English, French,
Italian, Spanish or Portuguese) to change the language on the
handset display. This setting is independent of the MMI setting

page 51. Select Input language (German, English, French, Italian,
Spanish or Portuguese) to change the language for entering text
messages
page 143 and the language for templates
page 155.
The Menu language is not changed if you change the Input
language. However, if you change the Menu language, the Input
language is changed to the same setting.
•Default settings - to reset the handset to the default settings. The
functions are reset separately on the MMI
page 97.
•T9 settings - to set up the handset for writing text messages

page 143. If you activate the Word completion setting and write a
word in a text message, the next word will be suggested automati-
cally if you have used this word pair often in the past. If you activate
the Sorting setting, the list of words will be sorted. The most
frequently used words will appear at the top of the list. If you acti-
vate the Word prediction setting, a possible next word will be
suggested when you enter a new word in a text message. If you acti-
vate the Defaults option, T9 mode will always be selected when you
start writing a text message. The Input language setting allows you
to choose a different language from the Menu language for writing
text messages. However, if you change the Menu language, the
Input language is changed to the same setting.
•Autom. keylock - if this setting is active (i.e. if the selection
button is filled in), the keypad will be locked automatically about a
minute after the handset is removed from the carrier. This will happen only if the main screen is displayed and none of the handset
functions is being used.
Bluetooth
•Veh. base station - to display the available car telephone kit
(vehicle base station - e.g. “AUDI BTA”) on the screen. The vehicle
base station is required for the bonding procedure
page 27.
•Bluetooth devices - to delete the list of bonded vehicle base
stations. Please note that the bonding procedure must be repeated
if the list is deleted.
•Bluetooth name - to change the name of the handset in use.
Call options
•Call waiting - when this setting is active and you are on the
phone, an audible tone will tell you if a caller is trying to reach you.
Select Status to check the current setting for the Call waiting func-
tion.
•Transmit caller ID - your telephone number is transmitted with
outbound calls when this setting is active. Select Network-depend.
to use the setting agreed in your service provider's contract. Select
Status to check the current setting for the Transmit caller ID func-
tion.
•Answer on eject - if this setting is active (i.e. if the selection
button is filled in
page 151, fig. 136), an incoming call will be
answered immediately when you take the handset out of the carrier.
Security
•PIN query - if you activate this setting, the PIN is always checked
when you switch on the phone. If Automatic PIN recognition is acti-
vated, the system does not ask you to enter the PIN explicitly. If you
deactivate the PIN query, the PIN is not checked when you switch on.
Some SIM cards do not allow the PIN query to be deactivated.
•Change PIN - first enter the existing PIN code for your SIM card.
The PIN can only consist of numbers from 0 to 9. The new PIN has
to be entered twice, as a precautionary measure, and is stored on
the SIM card. If you change the PIN when the SIM card is in a
A7
A1





!




Index189
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
R
Radio
MMI control console . . . . . . . . . . . . . . . 53
Multi-function steering wheel . . . . . . 129
Speech dialogue system . . . . . . . . . . . 174
Radio clock . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Radio mode, activating
MMI control console . . . . . . . . . . . . . . . 54
Speech dialogue system . . . . . . . . . . . 174
Radio reception, optimising . . . . . . . . . . . 60
Radio stations on MMI control console
Frequency . . . . . . . . . . . . . . . . . . . . . . . . 56
Moving . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Next station . . . . . . . . . . . . . . . . . . . . . . 56
SCAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Searching . . . . . . . . . . . . . . . . . . . . . . . . 56
Selecting from memory . . . . . . . . . . . . 58
Selecting from station list . . . . . . . . . . 55
Storing . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Radio stations on multi-function steering
wheel
Selecting from memory . . . . . . . . . . . 130
Selecting from station list . . . . . . . . . 130
Radio text . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Read error message (CD/DVD) . . . . . . . . . . 11
Received calls
Handset . . . . . . . . . . . . . . . . . . . . . . . . . 152
MMI control console . . . . . . . . . . . . . . . 91
Multi-function steering wheel . . . . . . 133
Redial
Handset . . . . . . . . . . . . . . . . . . . . . . . . . 145
MMI control console . . . . . . . . . . . . . . . 97Phone pre-installation . . . . . . . . . . . . . 102
Speech control system . . . . . . . . . . . . 163
Speech dialogue system . . . . . . . . . . . 177
Regional station function . . . . . . . . . . . . . . 59
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . 68, 69
Repeat command . . . . . . . . . . . . . . . . . . . . 51
Requirements for using the telephone . . . 87
Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Restart (MMI) . . . . . . . . . . . . . . . . . . . . . . . . 50
Rewind in track (media drive) . . . . . . . . . . 65
Ring tone
Handset . . . . . . . . . . . . . . . . . . . . . . . . . 155
MMI control console . . . . . . . . . . . . . . . 96
Ring tone volume . . . . . . . . . . . . . . . . . . . 155
Rotary pushbutton . . . . . . . . . . . . . . . . . . . 41
Route
Avoiding . . . . . . . . . . . . . . . . . . . . . . . . 118
Deleting . . . . . . . . . . . . . . . . . . . . . . . . . 117
Loading . . . . . . . . . . . . . . . . . . . . . . . . . 115
Storing . . . . . . . . . . . . . . . . . . . . . . . . . 113
With stopover(s) . . . . . . . . . . . . . . 105, 108
Without stopover(s) . . . . . . . . . . . 105, 107
Route criteria . . . . . . . . . . . . . . . . . . . . . . . 117
Route guidance . . . . . . . . . . . . . . . . . . . . . 104
Changing . . . . . . . . . . . . . . . . . . . . . . . 108
In driver information system . . . . . . . 111
On MMI display . . . . . . . . . . . . . . . . . . 110
Stopping . . . . . . . . . . . . . . . . . . . . . . . . 110
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Route list . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Route options . . . . . . . . . . . . . . . . . . . . . . 117Route plan
Changing . . . . . . . . . . . . . . . . . . . . . . . . 117
Entering . . . . . . . . . . . . . . . . . . . . . . . . . 108
S
SCAN
Radio stations . . . . . . . . . . . . . . . . . . . . . 56
Tracks (media drives) . . . . . . . . . . . . . . . 66
Scroll text . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Searching (radio) . . . . . . . . . . . . . . . . . . . . . 56
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Handset . . . . . . . . . . . . . . . . . . . . . . . . . 155
On MMI control console . . . . . . . . . . . . 98
While navigating . . . . . . . . . . . . . . . . . 104
While using telephone . . . . . . . . . . . . . 87
Selecting AV source . . . . . . . . . . . . . . . . . . 76
Sending tone sequence . . . . . . . . . . . . . . 149
Service following
DAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Setting display . . . . . . . . . . . . . . . . . . . . . . . 77
Setting the time . . . . . . . . . . . . . . . . . . . . . . 49
Showing report on map . . . . . . . . . . . . . . 122
Shuffle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Shutdown delay . . . . . . . . . . . . . . . . . . 96, 101
SIM card (handset) . . . . . . . . . . . . . . . . 30, 31
Single destination, entering . . . . . . . . . . . 107
Software version
Handset . . . . . . . . . . . . . . . . . . . . . . . . . 155
MMI control console . . . . . . . . . . . . . . . 52
Sorting call lists . . . . . . . . . . . . . . . . . 100, 102