start stop button AUDI A4 2008 B8 / 4.G Quick Reference Guide
[x] Cancel search | Manufacturer: AUDI, Model Year: 2008, Model line: A4, Model: AUDI A4 2008 B8 / 4.GPages: 6, PDF Size: 0.39 MB
Page 2 of 6

Downloaded from www.Manualslib.com manuals search engine
Page 2
1
2
3
4
5
6
894
7
1Starting/stopping the engine · Adjusting front seats
%advanced key
The advanced key allows you to lock and unlock the vehicle
and start the engine without handling the key itself. You only
need to have the remote control key on your person.
Unlocking the vehicle
Take hold of a door handle. The vehicle will be unlocked auto-
matically.
Locking the vehicle
Briefly touch the locking sensor on one of the door handles.
The selector lever must be in position Pon vehicles with
automatic gearbox.
Note:If you keep hold of the sensor, this will also close the
windows and the sun roof.
Adjusting front seats
Manual seat adjustment
eAdjusting head restraint
To raise head restraint:Take hold of the sides of the head
restraint with both hands and move it up as required
To lower head restraint:Press the button on the side and
move the head restraint down.
rAdjusting backrest
Take your weight off the backrest
and turn the knob.
tAdjusting seat height
Lift or press the lever repeatedly until
the seat reaches the desired height.
uAdjusting lumbar support
Press the appropriate part of
the switch.
iAdjusting angle of seat cushion
Lift or press the lever repeatedly
until the seat reaches the desired
height.
oMoving seat backwards or forwards
Lift the lever and move the seat into the desired position.
Then release the lever and move the seat further until the catch engages.
pAdjusting thigh support
Pull up the handle to extend the thigh support.
To retract the thigh support, push it back into the seat. Electrical seat adjustment
uAdjusting lumbar support
Press the appropriate part of
the switch.
aAdjusting seat height and
moving seat backwards
or forwards
Press the switch in the direction
indicated by the arrows: To raise/lower the seat
at the front
To raise/lower the seat at
the rear
To raise/lower the seat
To move the seat forwards/
backwards
sAdjusting backrest
Press the switch in the direction indicated
by the arrows: Backrest further upright/further
reclined
Starting/stopping the engine
Starting the engine
p Insert the key in the ignition lock.
p Manual gearbox: Press the clutch pedal and select neutral
gear.
p Automatic gearbox: Press the brake pedal and move the
selector lever to Por N.
p Press the key in briefly.
On vehicles with diesel
engine, keep your foot
on the clutch (manual
gearbox) or brake
(automatic gearbox)
until the engine starts.
Switching off the engine when the vehicle is stationary
p Vehicles with automatic gearbox: Move the selector lever to
Por N.
p Press the key in briefly.
Switching the ignition on/off
p Press in the key withoutpressing the clutch
(manual gearbox) or brake pedal (automatic gearbox).
The key can be removed only when the ignition is off.
Page 4 of 6

Downloaded from www.Manualslib.com manuals search engine
Page 4
1
2
5
6
7
8
8
18
13
16
14
17
19
20
22
23
25
21
24
11
10
9
12
15
3
4
Audi A4 Kurzanleitung englisch 9.07 281.562.843.20
Warning symbols
If one of the red symbols lights up while you are driving, stop the car
immediately, switch off the engine and refer to the Owner’s Manual.
Instruments and controls
1)Should one of these warning lamps light up when driving, please contact a qualified
workshop without delay.
Warning and indicator lamps
Press the button to display the messages for the red and yellow
symbols again for about 5 seconds.
SET
1Warning and indicator lamps · Filling the tank
5Instruments and controls
Dynamic steering
Emission control system1)
Engine management1)
lane assist (active)
Glow plug system1)
lane assist (inactive)
Electronic stabilisation
program (ESP)
Main beam headlights
Airbag system1)
Cruise control system
Turn signals,
hazard warning lights
Anti-lock brake system1)
Trailer turn signals
Parking brake/
Audi hold assist
Seat belt warning lamp
Fault in brake system
Alternator
Add engine oil
immediately
Fault in the brake system
Steering defective
Fault in the cooling system
Ignition lock defective
Engine oil pressure
too low
Tyre pressure monitor
Filling the tank
The tank flap is locked and
unlocked automatically via the
central locking system.
Opening the tank flap
Press the left side of the flap. Unscrew the tank cap anti-clockwise
and hook it onto the flap.
The correct fuel gradefor your vehicle is shown on the inside of the
tank flap.
The sticker listing the tyre pressuresis located on the inside face of
the driver’s door (only visible when door is open).
1 .....Recall buttons for seat memory
2 .....Adjuster for exterior mirrors
,3 .....Door handle and central locking switch
Unlock
Lock
4 .....Light switch,5 .....Button for side assist
To activate/deactivate the monitoring
function for the “blind spot”.
6 .....side assist warning lamp
7 .....Turn signal and main beam lever with button for lane assist
,8 .....Controls for audio, telephone andspeech dialogue system
9 .....
Instruments and warning/indicator lamps
10 ...Control lever for windscreen wipers/
washer and on-board computer
,11 ...Ignition lock
12 ...Display for sound system/MMI
13 ...Switch for hazard warning lights
14 ...Sound system or CD changer
The button on the sound system can
be used to select various vehicle settings.
CAR
15…Controls for:
Audi drive select
The following drive modes are
available: Comfort: for relaxed driving and a
comfortable ride
(e.g. on motorways)
Auto: standard setting
Dynamic: for performance-oriented driving
Sun blind
ESP OFF (deactivates and
activates the Electronic Stabilisation
Programme)
parking system plus
Press this switch to activate the
system when moving forwards.
16 ...Air conditioner
Automatic mode: Set the desired
temperature separately for driver and
passenger (e.g. +20 °C/+22 °C) and press
the button.
AUTO
17 ...Gear lever (selector lever on vehicles with automatic gearbox)
,18 ...MMI control console
19 ...ENGINE START/STOP button
,20 ...Audi hold assist and electro-mechanical parking brake
,21 ...Lever for steering column adjustment
,22 ...Control lever for cruise control
system or adaptive cruise control
23 ...Bonnet release lever
24 ...Switch for releasing the boot lid
25 ...Electric windows
,
,
Further information for these items is given on the following pages.
Page 6 of 6
![AUDI A4 2008 B8 / 4.G Quick Reference Guide Downloaded from www.Manualslib.com manuals search engine
Page 6
[20] Audi hold assist
The Audi hold assist func-
tion automatically detects
when the vehicle is statio-
nary and prevents it from
roll AUDI A4 2008 B8 / 4.G Quick Reference Guide Downloaded from www.Manualslib.com manuals search engine
Page 6
[20] Audi hold assist
The Audi hold assist func-
tion automatically detects
when the vehicle is statio-
nary and prevents it from
roll](/img/6/860/w960_860-5.png)
Downloaded from www.Manualslib.com manuals search engine
Page 6
[20] Audi hold assist
The Audi hold assist func-
tion automatically detects
when the vehicle is statio-
nary and prevents it from
rolling away. You do not
have to keep your foot on
the brake pedal.
Switching on/off: Press button
r. The diode in the button
will light up when the Audi hold
assist function is activated.
[20] Electro-mechanical parking brake
The parking brake replaces the conventional
handbrake.
Applying the parking brake when stopping:
Pull button
e.
Releasing the parking brake: Press brake
pedal and press button
e.
Releasing automatically: Drive off as normal.
The parking brake will be
released automatically
when you drive off.
WARNING!
Do not move the selector lever to positions P or R
when the vehicle is moving.
[17] Selector lever for automatic gearbox
P Parking lock
R Reverse gear
N Neutral
D Drive
To move the selector lever out of position
P or N, or into position Por R, press the inter-
lock button on the selector lever handle and the
brake pedal simultaneously.
Note:If the Audi hold
assist function is
switched off, use the
foot brake to hold the
vehicle when stationary
with the engine running
(in all selector lever
positions other than P).
Manual gear selection
(tiptronic)
The tiptronic program
enables you to change gear
manually. From position D,
push the selector lever to the right
as far as the stop. The currently selected gear is shown
in the instrument cluster display (bottom left). Push the
selector lever forwards briefly to shift up a gear, or pull
the lever back to shift down a gear.
1
2
3
[19] ENGINE START/STOP button
With the Audi advanced key you can start the engine
without having to insert the key into the ignition lock.
You only need to have the remote control key on your
person.
Starting the engine: Press the clutch pedal, select
neutral gear and press the START/STOP button
t.
On vehicles with automatic gearbox, move the selector
lever to position Por N, put your foot on the brake
pedal and press the START/STOP button.
Switching off the engine: Stop the vehicle, move the
selector lever to position Por Nand press the START/
STOP button
t.
Switching the ignition on/off: Press the START/STOP
button without pressing the clutch (manual gearbox)
or brake pedal (automatic gearbox).
[21] Lever for steering column
adjustment
Pull the lever and adjust
the position of the steering
column as required. Then push
the lever towards the steering column until the
catch engages.