stop AUDI A5 2008 B8 / 1.G Infotainment MMI Operating Manual

Contents3
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Entering the PIN/PUK code . . . . . .
Emergency calls . . . . . . . . . . . . . . .
Dialling a telephone number . . . .
Answering and ignoring telephone
calls . . . . . . . . . . . . . . . . . . . . . . . . . .
Ending calls . . . . . . . . . . . . . . . . . . .
Storing a telephone number in the
directory . . . . . . . . . . . . . . . . . . . . . .
Dialling a stored telephone number
Other settings for the Bluetooth car
telephone kit . . . . . . . . . . . . . . . . . .
Other settings for the phone pre-
installation . . . . . . . . . . . . . . . . . . . .
Navigation. . . . . . . . . . . . . . . . . . . . .
Introduction . . . . . . . . . . . . . . . . . . .
Activating navigation mode . . . . .
Entering a destination . . . . . . . . . .
Stopping the route guidance . . . .
Display . . . . . . . . . . . . . . . . . . . . . . . .
Storing a destination . . . . . . . . . . .
Loading a destination . . . . . . . . . .
Other settings . . . . . . . . . . . . . . . . .
Calling up traffic information. .
Introduction . . . . . . . . . . . . . . . . . . .
Calling up traffic reports (TP memo)
Setting a traffic station . . . . . . . . .
Calling up a traffic message . . . . .
Other settings . . . . . . . . . . . . . . . . .
Multi-function steering
wheel
. . . . . . . . . . . . . . . . . . . . . . . .
Basic operation . . . . . . . . . . . . . . . .
Introduction . . . . . . . . . . . . . . . . . . .
Adjusting the volume . . . . . . . . . . .
Listening to the radio . . . . . . . . . . .
Playing media . . . . . . . . . . . . . . . . . .
Television . . . . . . . . . . . . . . . . . . . . . .
Using the telephone . . . . . . . . . . . .
Navigation . . . . . . . . . . . . . . . . . . . . .
Voice control . . . . . . . . . . . . . . . . . . .
Telephone handset. . . . . .
Basic operation . . . . . . . . . . . . . . . .
Switching the handset on and off
Overview of the keypad . . . . . . . . .
Display . . . . . . . . . . . . . . . . . . . . . . . .
Using the telephone . . . . . . . . . . .
Placing calls . . . . . . . . . . . . . . . . . . .
Speed and one-touch dialling . . . .
Answering and ignoring telephone
calls . . . . . . . . . . . . . . . . . . . . . . . . . .
Emergency calls . . . . . . . . . . . . . . . . Ending calls . . . . . . . . . . . . . . . . . . . .
Options during a call . . . . . . . . . . . .
Answering and replacing further
calls . . . . . . . . . . . . . . . . . . . . . . . . . . .
Menus. . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction . . . . . . . . . . . . . . . . . . . .
“Last calls” menu . . . . . . . . . . . . . . .
“Phone book” menu . . . . . . . . . . . . .
“ Text messages” menu . . . . . . . . . .
“Settings” menu (handset) . . . . . . .
Vo i c e c o n t r o l . . . . . . . . . . . . . .
Telephone speech control
system . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction . . . . . . . . . . . . . . . . . . . .
Basic operation . . . . . . . . . . . . . . . . .
Name tags . . . . . . . . . . . . . . . . . . . . .
Speech recognition for some
export markets . . . . . . . . . . . . . . . . .
Storing names in the phone book*
Selecting a name from the phone
book* . . . . . . . . . . . . . . . . . . . . . . . . . .
Deleting a name from the phone
book* . . . . . . . . . . . . . . . . . . . . . . . . . .
Speech dialogue system . . . . . . .
Introduction . . . . . . . . . . . . . . . . . . . .
Basic operation . . . . . . . . . . . . . . . . .
Name tags . . . . . . . . . . . . . . . . . . . . .
Listening to the radio . . . . . . . . . . . .
Playing an audio CD . . . . . . . . . . . . .
Using the directory . . . . . . . . . . . . . . 88
89
90
92
92
93
94
94
101
104
104
105
105
110
110
112
114
116
121
121
121
122
122
123127
128
128
129
129
130
131
132
136
137
139
140
140
140
142
145
145
146
147
147148
149
150
151
151
152
153
154
155
159
160
160
161
164
167
167
168
168
169
169
170
172
174
175
175





 




Overview9
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Overview
Controls and displays at a glance
The various controls of the MMI are arranged centrally
and are easily accessible.
Multi-function steering wheel* . . . . . . . . . . . . . . . . . . .
Driver information system . . . . . . . . . . . . . . . . . . . . . . .
MMI display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CD changer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ON/OFF button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MMI control console . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Note
•Please note that only the MMI and its components are described
in this operating manual. For more information about your vehicle's
equipment and features, please refer to your Owner's Manual.
•The arrangement of the MMI switches and controls on right-
hand drive models* may be slightly different from the layout shown
in
page 8, fig. 1. However, the symbols used to identify the
controls are the same.
MMI: Multi Media Interface
The Audi Multi Media Interface (MMI) combines different
communication and entertainment systems in your Audi.
With your MMI you can listen to the radio or CDs, watch television*
and even connect portable players*1). The navigation system*
guides you directly to your destination. You can also follow your
individual route plan with up to three stopovers. Information about traffic conditions is taken into account when calculating your route.
Of course, you can use many your mobile phone's* functions in
conjunction with the MMI. Alternatively, a handset is available for
the integrated Bluetooth car telephone kit*. In addition, the MMI
combines various driver assistance systems of your vehicle.
You can access the comprehensive infotainment system in several
ways. On the one hand, you can reach all functions via the MMI
control console with its intuitive and standardised operation
concept. On the other hand, you can access frequently used MMI
functions via the multi-function steering wheel or the speech
dialogue system.
Notes on traffic safety
You should only perform important functions, e.g. enter a naviga-
tion destination, while the vehicle is stationary. Please always bear
in mind: Be prepared to stop operating the system in the interest of
your safety and that of other road users.
WARNING
•Today's driving conditions require your full attention. As the
driver, you have full responsibility for the safety of the vehicle and
other road users. For this reason, only operate the MMI when the
traffic conditions allow you to do so safely and when you can
maintain proper control of your vehicle - risk of injury.
•The volume of the audio sources (radio, CD player, etc.) should
only be set at a level which enables you to hear distant police and
emergency vehicles clearly - failure to do so could result in an acci-
dent.
•Please heed laws regulating the use of telephones in vehicles.
1)Still under development at the time of printing.
A1128
A2128
A342
A412
A540
A641










Media drives13
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Loading a CD
– Press the button
page 12, fig. 3. When the
CD changer is ready for loading, the red diodes in the CD
slot will flash.
– Insert the CD (text facing upwards) into the CD slot ,
holding it straight. The CD will automatically be loaded
into the next available position in the CD changer. The
diode light in the corresponding button will stop
flashing.
Loading all CDs
– Press and hold the button for more than 2
seconds.
– Wait until the red diodes in the CD slot flash.
– Insert all six CDs (text facing upwards) one at a time into
the CD slot , holding them straight. The button diodes
for the occupied positions will stop flashing.
Loading a CD in a specific empty position
– Press the button . The button diodes for any
empty positions will begin flashing.
– Press one of the flashing buttons .
– Wait until the diodes in the CD slot flash.
– Insert the CD (text facing upwards) into the CD slot ,
holding it straight.
Loading a CD in a specific occupied position
– Press the button . The diodes in buttons will
be illuminated to indicate which positions are already
loaded with a CD.– Press one of the illuminated buttons . The CD at that
position will then be ejected.
– Remove the CD from the slot .
– Insert the CD that you wish to load (text facing upwards)
into the slot , holding it straight.
If you press the button again while loading all CDs, the
loading process will be stopped.
After it has been ejected, the CD will automatically be pulled back
into the CD changer after about 30 seconds if it is not removed from
the CD slot.
Note
Please observe the notes for handling CDs
page 11.
Changing CDs
– Press one of the illuminated buttons
page 12, fig. 3.
The CD inserted at this position will then be played.
Ejecting CDs
Ejecting a CD
– To eject the CD that is currently playing, press the eject
button
page 12, fig. 3.
– To eject any CD, press the eject button and then one
of the illuminated buttons
page 12, fig. 3.
Ejecting all CDs
– Press and hold the eject button for at least two
seconds. All of the CDs are ejected one after the other.
LOADA3
A2
A2
A4
LOADA3
A2
A2
A4
LOADA3A4
A4
A2
A2
LOADA3A4
A4
A2
A2
LOAD
A4
A1
A1
A4
A1





 




Basic operation 40
Basic operation
All MMI menus at a glance
The menu structure
page 38, fig. 26 and
page 39, fig. 27
contains the available options for each main function of the MMI
system.
Note
Depending on the equipment fitted in your vehicle, the menus may
differ from those shown here.
Switching on and off
Vehicles without advanced key*
– The ignition must be switched on to turn on the MMI
system. The menu of the last main function selected will
appear. The last used audio/video source will automati-
cally be activated.
– To switch off the MMI system, remove the ignition key.
Your settings will be stored.Vehicles with advanced key*
– To switch on the MMI system, press the button.
– To switch off the MMI system, press the button
twice. Your settings will be stored.
Manual mode
– To switch on the MMI system, briefly press the ON/OFF
button
fig. 28.
– To switch off the MMI system, press and hold the ON/OFF
button until the MMI is switched off.
The MMI system will not be switched on automatically when the
ignition is switched on if it was turned off manually the last time it
was operated.
The MMI system remains in operative mode for approximately 10
minutes after the ignition is switched off. If you do not press any
function selector button, control button or the rotary pushbutton on
the MMI control console within this time period, the MMI system
will be switched off automatically.
Note
If the ignition is switched off and the battery charge level is low, the
MMI system will be switched off automatically.Fig. 28 ON/OFF button
START
STOP










Basic operation 44
Entering letters, numbers and symbols using
the speller
You can find an overview of the speller on
page 43.
Entering letters, numbers and symbols
– Turn the rotary pushbutton and select the letter, number
or symbol with the cursor . The selected figure will
appear larger in the selection ring .
– To apply the letter, number or symbol, press the rotary
pushbutton. Your entry will appear in the entry space .
– After entering all the characters, turn the rotary push-
button to OK and press the rotary pushbutton.
Deleting letters, numbers and symbols
– Turn the rotary pushbutton and use the pointer to select
DEL .
– To delete the last character in the entry space, press the
rotary pushbutton.
– To delete all characters in the entry space, press and hold
the rotary pushbutton until no characters are displayed
in the entry space.
In some cases (such as when using the navigation* function) certain
letters are not available for selection if they are an illogical option.
This means that you can only select those letters that are offered as
a logical possibility for this entry.
Use the speller for numbers to enter special characters (such as a
dash or full stop).
LegendSymbol /
MarkingExplanation
Po i n t e rTo highlight the selected item in white
and make it appear larger in the selec-
tion ring.
DELTo delete the character to the left of
the highlighted cursor.
To move the cursor in the entry space
forwards and backwards.
OKTo confirm a completed entry.
A...ZTo switch the speller from numbers to
letters.
Cursor
Entry space
Selection ringTo enlarge the character selected with
the cursor.
To switch from lower case to upper
case letters.
LISTTo show a list of suggestions.
0..9To switch the speller from letters to
numbers.
SpaceTo enter a space in the entry space.
List of sug-
gestionsTo show suggested entries in alpha-
betical order.
Indicates additional list entries.
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A1
A8
A7
A4
A2










Listening to the radio57
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Press the rotary pushbutton again to stop the SCAN func-
tion. The system will select the station currently
playing.
Storing stations
The memory list can contain up to 25 stations from all
wavebands.
Important: You must first select a TV channel
page 56.Using the rotary pushbutton
– Press and hold the rotary pushbutton until the station
appears in a free position on the memory list.
– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
– To store the station to the position on the memory list,
press the rotary pushbutton.
Using the Memory control button
– Press the Memory control button.
– Turn the rotary pushbutton and select Store station name

fig. 53.
– Press the rotary pushbutton. The selected channel will
appear in a free position on the memory list.
– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
– To store the station to the position on the memory list,
press the rotary pushbutton.
Using the Tuning control button
– Press the control button for Tuning.
– Turn the rotary pushbutton to STORE
fig. 52.
– Press the rotary pushbutton. The selected channel will
appear in a free position on the memory list.
– Turn the rotary pushbutton clockwise or anti-clockwise to
change the position on the memory list.
– To store the station to the position on the memory list,
press the rotary pushbutton.
Fig. 52 Storing a
station
Fig. 53 Storing a
station










Listening to the radio59
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control Traffic reports are automatically recorded for about one hour after
the MMI has been switched off. The recorded reports can be called
up via the TP memo function
page 121. Use the options Timer 1
and Timer 2 to set specific times at which you want to record traffic
reports
page 123.
Regional station function
Important: The radio must be set to the FM waveband

page 54.
– Select: Function selector button > function
selector button > Regional stations.
Some FM stations split up their transmission and provide different
regions with regional programmes with differing content.
Regional station function on
All regional stations can be received.Regional station function off
Only the regional station with the strongest reception can be
received.
Station reception
Important: The radio must be set to the FM, MW or LW wave-
band
page 54.
– Select: Function selector button > function
selector button > Station reception.
Station reception - local
The automatic search function (in FM, MW and LW waveband) will
only stop at stations/frequencies with a strong reception signal.
Station reception - distant
The automatic search function (in FM, MW and LW waveband) will
also stop at stations/frequencies with a weaker reception signal.
Station names
Important: The radio must be set to the FM waveband

page 54.
– Select: Function selector button > function
selector button > Station names.
Station names - scrolling
Scroll texts transmitted by FM stations will appear in the MMI
display.
Station names - fixed
Scroll texts transmitted by FM stations will not appear in the MMI
display. The current scroll text in the display will freeze.
TP symbolFunction
Filled inThe Traffic Programme function is activated.
Traffic news stations can be received and traffic
reports will cut in.
Not filled inThe Traffic Programme function has been
switched off. Traffic news stations can be
received, but no traffic reports will cut in.
Crossed outThe Traffic Programme function is activated. No
traffic news station can be received. No traffic
reports will cut in.
Not displayedThe Traffic Programme function has been
switched off. No traffic news station can be
received.
RADIO
SETUP
RADIO
SETUP
RADIO
SETUP










Playing media 66
playing, the rewind function will automatically stop when it reaches
the beginning of the track; the track will then be played.
If you select “Previous” within the first 10 seconds of a track, the
previous track will be played. If you press the button after ten
seconds, you will go back to the beginning of that track.
Note
You can also fast forward and rewind within a track by pressing and
holding the arrow buttons on the MMI control console
page 41.
By briefly pressing the arrow buttons you can jump to the
previous/next track
page 41.
Shuffle
The tracks can be played in random order.
Important: A track must be playing
page 65.
– Press the control button for CD control.
– Turn the rotary pushbutton to Shuffle
fig. 59.
– Press the rotary pushbutton to activate the shuffle func-
tion.Note
The shuffle function depends on your repeat settings
page 68 or

page 69.
Scanning tracks
The SCAN function plays each track on the CD for a few
seconds.
Important: A track must be playing
page 65.
– Press the control button for CD control.
– Turn the rotary pushbutton to SCAN
fig. 60.
– Press the rotary pushbutton to start the SCAN function.
– Press the rotary pushbutton again to stop the SCAN func-
tion. The track currently being scanned will be played.
Pausing and resuming (media drive)
Important: A track must be playing
page 65.
Fig. 59 Shuffle
Fig. 60 Scan





!!




Playing media69
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
Other settings for Audi music
interface
Applies to vehicles: with Audi music interface
Repeating (repeat/shuffle)
Important: A portable player must be connected via an iPod
adapter cable
page 16 or via a USB/mini USB adapter
cable
page 17.
– Select: Function selector button > source Audi
music interface > function selector button >
Repeat/shuffle.
Repeat/shuffle Tr a c k
The track currently playing will be repeated. Interface Repeat will
appear in the heading. The shuffle function cannot be activated.
Repeat/shuffle List
The tracks on the list currently playing will be repeated. If the shuffle
function is active, the tracks on the current track list will be played
in random order.
If you have connected a portable player via a USB/mini USB adapter
cable, you can select List and additionally set the function Include
subfolders. All tracks in the subfolders of the current list will then
also be repeated.
Repeat/shuffle off
The repeat function is switched off. All tracks or lists on the
connected device will not be repeated. If the shuffle function is
active, all tracks or lists will be played in random order.
Note
•The shuffle function also depends on these settings
page 66.
•If the shuffle function is activated and you change the repeat
option from List to off, the current track will stop playing and a new
track will be selected at random.
Applies to vehicles: with Audi music interface
Track information (INFO)
Important: A portable player must be connected via an iPod
adapter cable
page 16 or via a USB/mini USB adapter
cable
page 17.
– Select: Function selector button > source Audi
music interface > control button CD control > INFO (track
information).
Information on the current track (e.g. artist) stored to the ID3/ WMA
tag will be displayed.
Applies to vehicles: with Audi music interface
Track information
Important: A portable player must be connected via an iPod
adapter cable
page 16 or via a USB/mini USB adapter
cable
page 17.
– Select: Function selector button > function
selector button > Track information.
If ID3/ WMA tag information on the current track (e.g. artist) is avail-
able and this function is active, it will be displayed as a pop-up for
the track currently playing.
MEDIA
SETUPMEDIA
MEDIA
SETUP





!




Managing the directory81
MMI componentsMMI control consoleMulti-function steering wheelTelephone handsetVoice control
– Press the rotary pushbutton to open the entry space
Surname. The speller will appear on the MMI display

page 43.
– Using the speller, enter the name and confirm your entry
by turning the speller to mark OK and then pressing the
rotary pushbutton. The entry space will appear in the
MMI display.
– To enter more data, select an entry space using the rotary
pushbutton and proceed as described above.
Applies to vehicles: with Bluetooth car telephone kit or phone pre-installation
Importing entries from the phone book
Entries can be imported into the directory from the phone
book of your mobile phone.
Important: The directory must be open
page 80 and the
phone pre-installation
page 20 or the Bluetooth car tele-
phone kit
page 25 must be activated.
Importing an entry
– Press the control button for Import. The menu From
phone book will appear on the MMI display
fig. 72.– To import an entry from the list turn the rotary push-
button to mark the entry and press to confirm. The entry
will then be imported.
– To find an entry on the SIM card or in the phone book of
your mobile phone, turn the rotary pushbutton to select
Find entry
page 80, fig. 70. The speller will appear on
the MMI display
page 43.
– Using the speller, enter the name and confirm your entry
by turning the speller to mark OK and then pressing the
rotary pushbutton. The entry will then be imported.
Importing all entries
– Press the control button for Import. The menu From
phone book will appear on the MMI display
fig. 72.
– Turn the rotary pushbutton to select Import all entries
and press it. The entries will then be imported.
You can only store up to 150 entries in the directory. If there are
more entries on the SIM card or in the phone book of your mobile
phone than there are memory positions in the directory, a message
will appear in the MMI display. You can either store entries from the
SIM card or the phone book to the free memory positions or stop the
import function.
Note
You can call up the memory capacity of the directory
page 86.
Fig. 72 Importing
entries from mobile
phone book