AUDI A5 2008 B8 / 1.G RNS_E Navigation System Manual

166

167 CAR, SETUP

CAR 168CARIntroductionSelecting car function– Pr e ss t h e fu n c t i o n b u t to n
page 16. Th e m ai n c a r
menu or the menu for the Versi on function will be
displayed.If you select the Ve rsi on function in the main Car menu, the hard-
wa re a n d s o ft wa re s t a t us fo r t h e “Au d i N a v i g a t i o n S ys t e m p l us ” w il l
be displayed.
Tips
If you press the button within the Car function, you can
program sound and tuning settings using the control buttons and
adjust the brightness for the display
page 169.
CARSETUP

SETUP169
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
SETUPIntroductionGeneral safety precautionsEnter vehicle settings only when the vehicle is stationary. The
procedures described below would distract your attention from
traffic if you performed them while driving. Please note
page 9,
“Notes on Traffic Safety”.
Selecting Setup functionFig. 180 Display: Setup Radio
– Press the button in addition to a button already
pressed. The main Setup menu
fig.180 which is part
of the main function (e.g. radio) is displayed.
– Press one of the control buttons in a Setup main menu

page 17 to go to the submenus for the Setup function
(in the example Radio to
fig.180).The Setup menu operates in conjunction with a function button
already pressed
page 16 a n d o p e n s a d d i t i o n a l m e n u i t e m s f o r t h e
main function Radio, CD, MP3 and Navigation. By pressing the
control buttons, the Setup submenus Settings, Sound and Display
can be opened
fig.180. These Setup submenus are always the
same, regardless of which Setup main function you are in.
SETUP
A1
A3

SETUP 170The following submenus are available in the Setup
function:
Tips
You can read about system-specific Setup settings functions in the
description for each primary function.
Settings control buttonSetting the menu language
Display texts can be shown in different languages.Fig. 181 Setup: Menu language setting–Press the Settings control button in the Setup menu.
– Select Menu language
fig.181.
– Select the desired menu language.The display texts for the Navigation System are changed to the
selected language. The language for the audible navigation
commands are also changed.
The following languages can be selected:
Control button
functions 
page 169,
fig. 180
Setup submenus

Settings
Menu language
Distance unit
Time/Date format
Factory settings
Delete user data

Sound
Balance
Fader
Tr e b l e
Bass
DSP
a)b)

Volume settings (Navigation info)
a)Digital Signal Processingb)Vehicles with a BOSE® sound system in conjunction with an AudioPilot do
n o t h av e a D SP f un ct i o n. I n th is c as e y o ur v e hi cl e is equ ip p ed w i th d y n am ic
noise compensation
page 94.
Display
Switch off display
Brightness
A1AA3

SETUP171
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP


German


English


French


Italian


SpanishTips
The menu language can only be selected when the vehicle is
stationary. The function is greyed out while you are driving and
cannot be selected.Setting distance unit (km/miles)Fig. 182 Setup: Distance unit–Press the Settings control button in the Setup menu.– Select Distance unit.
– Select from the units miles or km.
Time/Date format
Time of day and date can be adjusted through the
preset formats.Fig. 183 Setup: 12h time format settingSetting time format
–Press the Settings control button in the Setup menu.
– Select Time/Date format
fig.182.
– Select Time format
fig.183.

SETUP 172
– Choose between the display 12h and 24h.
Setting date format
–Press the Settings control button in the Setup menu.
– Select Time/Date format
page 171, fig.182.
– Select Date format
page 171, fig.183.
– Choose between the display MM/DD for the format
“Month/Day” or DD.MM for the format “Day.Month”.The instruments cluster acts as the source for the time and date
display.
If the instrument cluster source is not available for some reason, the
time and date are received via the GPS. In this case GPS shows
under the menu item Time source GPS time can be set through the
menu item GMT +/-
Tips
If the instrument cluster source should not be available, please
contact an Audi dealership or authorized facililty.
Factory settings
Settings can be reset to prespecified default settings in
this function.Fig. 184 Setup: Settings factory settings–Press the Settings control button in the Setup menu.
– Select Factory settings
fig.184.
–Confirm Reset system to factory presets? with Ye s. The
settings (e.g. Setup Navigation and route criteria) are
reset to default settings.User data are not deleted.

SETUP173
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Delete user data
User data in the Navigation System can be deleted.–Press the Settings control button in the Setup menu.
–Select Delete user data
page 172, fig.184.
–Confirm Are you sure you want to delete all user data??
with Ye s. User data (e.g. directory data, previous destina-
tions, radio memory list) are deleted.Sound control buttonSound settingsThe explanations for the sound settings start with section page 92.
Display control buttonSwitch off displayFig. 185 Setup: Switch off displaySwitch off display
–Press the Display control button in the Setup menu.
– Select Switch off display
fig.185. The display is
switched off, the systems for navigation remain active.
Switch on display
– Press or rotate the control knob
page 17, or
–Press a
page 16 function button, or

SETUP 174
– Press the button or

button
page 12 to
switch the display on again.
Brightness
You can set display brightness manually.Fig. 186 Setup: Adjusting the brightness of the display–Press the Display control button in the Setup menu.
– Select Brightness
page 173, fig.185.
– Rotate the control knob to change the brightness of the
display.Th e b r i g h t n e s s o f t h e d i s p l a y a d j u s t s a u t o m a t i c a l l y t o a m b i e n t l i g h t .
In addition, the brightness of the display can be regulated with the general adjustment for instrument lighting and with the Brightness
function in the Navigation System.
Tips
You can find more information about adjusting the instrument
lighting in your Owner's Manual.
RETURN

Frequently Asked Questions (FAQ)175
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Frequently Asked Questions (FAQ)Self-helpCategorie
What's wrong if...
Abhilfe
General
operation
the system does not react to entries?
A system reset-start provides easy immediate help when the Navigation System
has crashed
page 20.
you change the main function, but the
main menu is not displayed?
If you press the function button again, the main menu will be displayed
page 16.
Radio
you select a radio station on the AM
band from the memory list and there is
no reception?
The list of radio stations on the AM band is static and has to be adjusted manually
to the current reception status
page 59. This displays the stations, even if these
stations are not being received.
CD
MP3
the “Random” function does not start,
although you have activated “Random”?
The Random function depends on the setting in Repeat
page 81 or
page 86.
Name
(Directory)
only the data field Name c a n b e s e l e c t e d
in the directory and the remaining data
fields are shown greyed out?
Before all the data fields can be accessed, the name first has to be entered in the
directory
page 100.
Navigation
you are not shown the destination entry
screen with the direct final destination?
The Route with stopover function is active. Select the menu item Route without
stopover in the Route function
page 139.
you cannot enter your destination
address or you cannot find it in the navi-
gation system?
Destination entry is divided into regions. Before entering a street, a city, a special
destination, a special destination telephone number or map coordinates, the
appropriate region must be selected first.
you cannot leave the activated map
page menu?
Press the button
page 144.
RETURN