Downloaded from www.Manualslib.com manuals search engine
AUDI A4 A5 Q5 User’s manual
1. It is suitable for all AUDI NON MMI system A4/Q5/A5 from 2005 up version.
2. Built ‐in CANBUS with car original button switch
3. Built ‐in FM transmittion. When setting Radio channel into FM87.9, exteral audio will be sound from car
original speaker.
4. With OEM cable harness, 100% plug and play, which can avoid damaging the original system.
5. With two AV, RGBS input, as well as two AV, LV D S output Synsh
6. Built ‐in GPS function (optional, when place).
7. Auto switch rear camera when gear in reverse backwords.
GPS Technical Dat:
1. Main Control Processor: SiRF Atlas IV, and main frequency: 500MHZ
2. main storage: 64M ,128M (optional:DDR I)
3. Flash storage: 64M,128M,1G,2G (optional:Nand flash )
4. video output format: RGB，CVBS ，YC，digital: RGB565
5. Synch signal: composite sync signal, and sy nchronizing signal separation
6. video output system: NTSC，PAL
7. video output resolution: 320X240,400X234,480X234,800×480
8. GPS antenna power: 3-5V
9. Operation system: WINCE .NET 6.0 Core Version
10. Input voltage: 5V-24V
11. Touching panel connection: 4PIN S resistance touching function
12. Memory Card: SD/MMC/SDHC（SDHC）4GB~32GB
Downloaded from www.Manualslib.com manuals search engine
After you detached the front panel, you can also instal our filexible touch panel also in front the
Original monitor. And after finish the all installation, you can activate the GPS function first, when
Turn on power, can use igo8, Garmin NAVI MAP system.
DIP SET Instruction
Downloaded from www.Manualslib.com manuals search engine
Three button of video Intehration is for adjusting Picture’s: Brightness, Saturate, Contrast.
Picture position: H, L
Switch operation:
The parts with the Video Integration:
RGB, AV, Speaker, FM connector GPS Antenna Oem cable harness for plug and pla
Two LV D S cables and flexible film touch panel Unit and parts connection
