manual radio set AUDI A5 2009 B8 / 1.G RNS_E Navigation System Manual

Overview9
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
OverviewControl unit with screenThis overview is to assist you in familiarizing yourself
with the controls and their functions.
On/Off knob
Switching on and off . . . . . . . . . . . . . . . . . . . . . . . . . . .
Volume adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Button (

) for opening and closing the Display . . . . . .
Function buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Forward/reverse buttons . . . . . . . . . . . . . . . . . . . . . . . . .
Control knob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tips


Please note that this Operator's Manual describes only the Audi
Navigation System plus and its components. You can find addi-
tional information on vehicle operation in your Owner's Manual.


Some the equipment shown is found only in certain model
versions or is optional equipment
Important NotesNotes on Traffic Safety
To ensure driving safety, settings in the Navigation
System must only be performed when the vehicle is
parked.The broad range of equipment in the Audio Navigation System
provides a wealth of potential entertainment and a wide variety of
information in addition to navigation.
Carry out your settings in the Navigation System only when the
vehicle is stationary. Avoid using the Navigation System while you
are driving so that you can devote your full attention to traffic. Use
the controls on the multi-function steering wheel*
page 21 while
you are driving.
WARNING


Pay attention first and foremost to your driving! As the driver
of the vehicle, you have total responsibility for operating the
vehicle safely. Therefore, when using the Navigation System func-
t io n s , m ak e c er t ai n t h at y o u a l w ay s h av e c o m p l et e c o n t ro l o f y o u r
vehicle!


Traffic today requires your full and continuous concentration.
A s t h e d ri v e r, y o u b e ar c o m p l et e re sp o n s i b il i t y fo r sa fet y i n t raff i c .
Therefore, to ensure driving safety, settings in the Navigation
System must be performed only when the vehicle is parked.
A1
11
19
A2
12
A3
16
A4
27
A5
18
A6
17
A7
17
A8
RETURN
18

Overview11
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Cleaning the controls
– First clean the controls with a brush to remove dust.
– Then wipe the controls with a clean, soft, slightly damp
cloth.Display
The Display can be cleaned with a professionally available “LCD
cleaner”. The cloth should be slightly dampened with the cleaning
fluid to clean the display.
Controls
The controls should be cleaned with a brush first so that no dirt is
trapped between the buttons and the housing. We recommend
giving the controls a final wipe with a cloth moistened with water
and dish washing detergent.
Note
Treat the display with care. Pushing on it with your finger or
touching it with sharp objects can cause dents or scratches.Switching on and offAutomatic switching on and offThe Navigation System switches on automatically after you turn on
the ignition. When you remove your key from the ignition lock, the
Navigation System will automatically switch off.What happens when it is switched on?
When the system is switched on, the start screen appears. The
o u t p u t m e n u o f t h e l a s t s e l e c t e d m a i n f u n c t i o n i s d i s p l a y e d . T h e l a s t
selected audio source is switched on automatically.
What happens when it is switched off?
When the equipment is switched off, the display darkens and the
audio source is silenced. Settings that have already been made do
not change.
Tips
The display can be switched off in the Setup menu
page 173, the
operating mode selected remains active.
Switching on/off manually
The Navigation System can also be turned on and off
manually if necessary.
Fig. 3 Navigations-
system: ON/OFF knob

Overview13
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Tips
You can find information about the different drives starting on page 34.Anti-theft codingGeneral
Effective safety measures in conjunction with the PIN
prevent misuse of the equipment by unauthorized
parties.The electronic lock-up is operational, if:

the Navigation System is removed from the vehicle,


the Navigation System is disconnected from the vehicle current
supply,


the battery is disconnected or


the electric fuse for the Navigation System is blown.
I f t h e a n t i - t h e ft c o d i n g h as l o cke d up t h e N a v i g a t i o n S ys t e m fo r o n e
of the reasons given, the speller display for entering the PIN
page 14, fig.6 appears after the Navigation System is switched
on.
After that, the Navigation System can only be operated again only
by entering the correct PIN.
This PIN is attached to the equipment card along with the equip-
ment number.
The PIN can be used for your equipment alone and cannot be
changed.
Note
The “equipment card” should be removed and kept in a safe place -
under no circumstances should it be kept in the vehicle. This makes
the Audi Navigation System unusable by thieves.Applies to vehicles: with convenience codingUser-friendly radio codingAft e r t he P I N i s e n t e re d t h e fir s t t im e , t h e N a v i g a t i o n S ys t e m g e t s to
know its vehicle.
If the power supply was interrupted, the Navigation System checks
to see whether it is still its vehicle. If it is, the Navigation System is
ready for use again after a few seconds.
It is no longer necessary to manually disable the electronic lock!
However, if the Navigation System is installed in another vehicle,
the electronic lock must be cancelled by entering the PIN page 14.

General system operation 20Home functionIf you activate the function button within a main function, the
system will automatically jump to the main menu of that main func-
tion.
In Navigation “Home function” depends on the route guidance
selected: If you have activated route guidance with stopovers, you
go to the menu for route planning by pressing the function button
again
page 139, fig.146. If you have activated route guidance
without stopovers
page 139, y o u g o t o t h e m a i n n a v i g a t i o n m e n u
(singe destination mode) by pressing the function button again.
History function
The system recalls the previous settings.When a function button is pressed, the system will switch to the
most recently accessed menu level for the specific main function.
This includes any sublevels that were opened. This excludes Setup
menus.
The history memory is erased when the system moves into standby
mode.
An example: You are currently on the Tuning radio menu and switch
to the navigation menu by pushing the button. If you press
the button at this time, you will not jump to the main radio
menu, but directly to the Tuning radio menu.
Start Navigation System ResetThe following process will restart your Audi Navigation
System and will allow complete functionality sytem to be
restored.
– Press the ON/OFF knob to switch the Navigation System
off.
– Press and hold the ON/OFF knob until the display reap-
pears and turns black.
– Release the ON/OFF knob as soon as the display has
turned black. A f t e r a f e w s e c o n d s , t h e N a v i g a t i o n S y s t e m
begins its restart, or you can switch it on manually

page 11.
NAV
FM

AM
Fig. 15 Navigation
System ON/OFF knob

Drives45
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP


Never expose CDs to direct sunlight.Tips
I f y o u w a i t l o n g e r t ha n 3 0 s e c o n d s wi t h o u t re m o v i n g t he C D, t h e CD
will be pulled back into the CD changer automatically.Applies to vehicles: with CD changer with magazineCD changer with magazine
CD changer with magazine:
fig.44
Sliding door to close the CD slot
CD magazine slot
Cartridge eject button
CD Changer Magazine
fig.45
Upper side of the magazine
Lower side of the magazine
As a r ul e , t h e C D ch a n g e r a n d m a g a z in e a re i n s t a l l e d i n t h e lu gg a g e
compartment of most vehicles. In other models, they may be
in s t a ll e d i n a c o mp a r tm e n t in t h e re a r s id e t r i m o r b e h i n d t h e d ri v e r
seat. Please refer to your Owner's Manual for the exact location.
Note
The CD changer is intended for use with 12 cm (4.7 inch) discs
only.
Fig. 44 CD changer
with magazine
Fig. 45 CD magazine
A;AA A;A

RADIO59
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP All the FM stations that can be received are on this list. The list is
limited to a maximum of 30 stations.
If the main FM radio menu does not appear after pressing the func-
tion button, you can change the frequency band by pressing the
Band control button
page 57 or by repeatedly pressing the
function button page 16.
Radio station list on the AM band
The AM band radio station list is static and has to be
changed manually.Fig. 56 Radio: AM station list (main menu)– Press the function button if another menu is
currently being displayed.– In the main AM radio menu select Update station list
with the control knob to update the list of radio stations.
– Select the desired radio station.
All the AM stations that can be received are included at this time in
the station list in this manually activated search. The list is limited
to a maximum of 30 stations.
I f y o u a re o u t s i d e t h e t r a n s m is s io n ra n g e fo r y o u r s t a t io n , i t w il l s t i l l
b e d i s p la y e d b ut t h e re wi l l b e i n t e r fe re n c e in t he s i g n a l . I n t h a t c as e
update your list of stations
fig.56.
If the main AM menu does not appear after pressing the function
button, you can change the frequency band by pressing the Band
control button
page 57 or by repeatedly pressing the
function button page 16.
FM

AM
FM
AM
FM

AM

RADIO61
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Memory control buttonUsing the memory list
Up to 30 stations from all available frequency bands
can be saved in the memory list.Fig. 58 Radio: Memory listSaving a new station in the memory list
– Select the desired radio station in the main radio menu
with the control knob.
–Press the Memory control button.
– By rotating and pressing the control knob, select Store
station station-ID
fig.58.– Select your desired memory location by rotating the
control knob.
– Press the control knob to save the station.
Selecting a station from the memory list
–Press the Memory control button in the radio menu.
– By rotating and pressing the control knob, select a
station from the memory list.
In addition to the lists of available radio stations (
page 58), the
radio function gives you the option of collecting the radio stations
that you want in a memory list.
The frequency band
page 57 is indicated in each case to the right
of the station name fig.58.
When you save a new station, an empty memory location will be
offered automatically. You may also select any other memory loca-
tion or you can replace one that is already taken. If a station is
already stored there, it is overwritten.
If the current station is already saved in the memory, you are not
given the option Store station station-ID.
When you have selected the station you want in a radio station list
page 59, fig.56, you can switch to the memory list by pressing
and holding the control knob to save this station.
I n S e t u p r a d i o , y o u c a n d e l e t e s a v e d r a d i o s t a t i o n s f r o m t h e m e m o r y
list using the Delete stored stations function
page 67.
Starting on
page 62 you can find how to set and save radio
stations manually.

RADIO 62Sound control buttonSound settingsStarting on
page 92, you can read how to select the sound
settings for the radio function.
Tuning control buttonManual station selection
With the manual settings option, even weak stations
can be set and saved.Fig. 59 Radio: Manual tuning (forward)
–Press the Tuning control button in the FM/AM radio
menu.
– Select >> (“Tune up”)
fig.59 or << (“Tune down”) in the
Display by rotating the control knob.
– Press the control knob to set the desired station
frequency.Briefly pressing the control knob will change the frequency in small
steps. If you hold the control knob down, the frequency changes
more rapidly. When you release the control knob, the frequency
adjustment stops.
W h e n y o u h a v e s e l e c t e d a r a d i o s t a t i o n m a n u a l l y, y o u a r e s h o w n t h e
station even after switching to the main Radio menu.
If you have selected a weak station in the FM band, it does not
continue to appear on the station list as a selection after changing
radio stations.
The control wheel functions always refer to the frequency band that
is currently set.

RADIO 64
–Press the Tu n i n g control button in the FM/AM radio
menu.
– Using “Manual station search”
page 62 or “Automatic
seek”
page 63, select the station (or frequency) that
you wish to save.
– By rotating and pressing the control knob, select STORE
(“Store station”)
page 63, fig.61.
– Select your desired memory location by rotating the
control knob.
– Press the control knob to save the station.Using the control wheel, you can also save manually set radio
stations
page 62.
When you save a new station, an empty memory location will be
offered automatically. You can also choose any other memory loca-
tion.
You can find additional information about radio stations starting on
page 61. In Setup radio you can delete saved radio stations from
the memory list
page 67.
Automatic station scan (SCAN)Fig. 63 Radio: SCAN function–Press the Tuning control button in the FM/AM radio
menu.
– By rotating the control knob, select SCAN
fig.63.
– Press the control knob to begin scan. The receivable
stations are played for a few seconds.To s e l e c t t h e s t a t io n t h a t i s c urre n t l y b e i n g p l a y e d , p re s s t h e c o n t ro l
knob again.

Navigation (NAV)115
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP A s s o o n as y o u h a v e e n t e r e d a r o u t e i n t o t h e N a v i g a t i o n S y s t e m a n d
begun navigating, guidance to your destination will also be
displayed in the instrument cluster display.
When the turn-off is immediately ahead, the arrow points in the
direction in which you should turn. In addition, the name of the
s t r e e t i s s h o w n u n d e r t h e a r r o w. A b a r g r a p h
page 114, fig.119 on
the right in the display takes you precisely to the turn-off point.If it is necessary to make a lane change before the turn off, you are
warned in plenty of time about this lane change before the turn-off
arrow by a second arrow
page 111, fig.114.
Tips
With active guidance, you can switch to the trip computer display*
by pressing the trip computer reset button*. Pushing the trip
c o mp ut e r re s e t b ut to n * a g a in r e t ur n s y o u to g u i d a n c e . Yo u c a n fin d
detailed information about the trip computer* in the Owner's
Manual.Selecting navigation function
The navigation functions can be selected with the
function button.Fig. 120 Display: Main navigation menu
Display
Short descriptionDistance remaining to next turn pointEstimated time of arrival at destination or current
stopoverDirectional arrowLocation-dependent display of freeway, highway
and street names
An arrow before the display identifies the name of
the street onto which you should turn.Total kilometers to destination or current stopoverChange of direction arrowBar graph (countdown): bars decreasing in size indi-
cate how the distance to the immediate turn-off
point is decreasing; the bar graph is not shown until
a change of direction arrow is displayed.If there is another side street before the turn-off
point which is not part of current guidance, this side
street is represented by a side-street symbol in the
instrument cluster display.
A1AA AA4A9A:A
NAV