AUDI A5 2013 8T / 1.G Getting To Know

Downloaded from www.Manualslib.com manuals search engine Audi connect® can provide you with Google Earth™, Google Voice™
Local Search, Wi-Fi Hotspot, Online Services (fuel prices, weather
information, travel information, news feeds), and myAudi
Destinations.

TEXT A5ACT1 to 38981

Do not text and drive. Message and data rates may apply.
Audi connect®
Confi guration:
Audi connect®Initial Setup
Note: Vehicle should be stationary with the parking brake set before
performing these operations.
Audi connect®
1. Ensure SIM card (provided by dealer) is
present in the SIM slot.
2. Press the “TEL” button.
3. Press the “Settings” control button.

Downloaded from www.Manualslib.com manuals search engine Audi connect®

cont.4. Scroll to Connections and press
the control knob once to select.
Wi-Fi Configuration
5. Select Data connection.
6. Then, select Set up
connection, scroll to
without request and select.
7. Press the “BACK” function
button and select Network
connection (Wi-Fi).8. Ensure that Wi-Fi active is
On with check mark.
9. Scroll to Wi-Fi settings
and select.10. Select Password and
enter a password at least
eight characters long and
select OK.
*Most devices use Encryption type
WPA2 as the default.
11. Select Apply settings to
save your password.12. On your device, search for
Wi-Fi Networks select
the SSID and enter your
password to establish
a connection.
Note: You may connect up to eight wireless
devices at one time.
Always pay careful attention to the road, and do not drive while distracted. The features and technologies discussed are optional, may
require an additional subscription with separate terms and conditions, and should be used only when it is safe and appropriate.
The Wi-Fi hotspot feature is intended for passenger use only.
Audi connect® services are only available where there is mobile network coverage. You can obtain more information from your current service provider.
Audi connect®

Downloaded from www.Manualslib.com manuals search engine Audi Navigation Your MMI® Navigation system has extraordinary capabilities
to enhance your drive with user-definable views, routing
selections and more. Get started with setting destinations
and discover more as you become familiar with the interface.

Setting a Destination1. Press the “NAV” function button.
2. Select the Destination control button.To set a destination:
Navigation
Please drive safely. Enter destinations while vehicle is stationary away from traffi c.
Always pay careful attention to the road, and do not drive while distracted.Important Warnings and Safety Information, which you must read,
are listed on the last panel under Navigation & Infotainment.3. Select Address from the
Navigation Menu.4. Select City/Zip code fi eld
and enter information.5. Continue by entering the
Street and House number.6. When complete, select
Start route guidance.
Do not text and drive. Message and data rates may apply. TEXT A5NAV4 to 38981
Navigation

Downloaded from www.Manualslib.com manuals search engine Audi Navigationcont. Destinations can also be chosen from Online Destinations, Points of Interest, or a list of
Favorites you create. You may also speak natural language commands using the Talk
button (See Voice Recognition.) Verbal destination commands can be given while in
any screen.Setting a Destination (Voice Recognition)To set a Destination with voice commands:1. Press the “TALK” Button.
2. Say “Enter Address”(Other commands are available on screen.)
See Owner’s Manual for complete list of commands.
3. After the beep, speak the address; for example “2024 Main St, Los Angeles, California”. The system will respond with repeating the address
for confirmation.
4. System will respond, “The list is being loaded,” it will repeat the address, and then ask if you would like to start route guidance; after the beep
say, “Yes” and guidance will begin.Note: The MMI® will display the most frequently used voice commands while waiting for your response.
When pressing the “iNAV” button, the last navigation announcement will be repeated. Google™ Local Search (Online Destinations):
TEXT A5NAV5 to 38981 1. Press the “TALK” button.
2. Say “Search” or “Online
Destinations” followed by a keyword
such as “Search Coff ee Shop”.
Cellular connectivity is dependent on available cellular signal.
Do not text and drive. Message and data rates may apply.*Google Voice™ Local Search requires Audi connect®, and may require an additional subscription with separate terms and conditions.
The features and technologies discussed are optional, and should be used only when it is safe and appropriate.
3. The system will respond with
“retrieving requested information”
and display a list.
4. Make your selection from the list
displayed by speaking the line
number. The system will confi rm
your selection.
5. Say “Start route guidance” to start
the navigation to your destination.
Navigation
Important Warnings and Safety Information, which you must read,
are listed on the last panel under Navigation - Voice Recognition.

Downloaded from www.Manualslib.com manuals search engine Your Climate Control System will maintain the
cabin temperature to your selected temperature.
This will automatically regulate the temperature,
fan speed and airflow. Once activated, there is
no need to alter the settings.
When “AUTO” is selected, “AC ” will come on
automatically to condition the air.AUTO SettingNote: AC is used to dehumidify the air.Automatic Climate ControlTemperature and airfl ow can be operated independently
for each side of the cabin. The airfl ow selector directs
air to the fl oor, panel or defrost vents, or a combination.
The MMI® display will indicate the best fan speed for the
chosen temperature.

Dual Controls
Automatic
Climate Control

Downloaded from www.Manualslib.com manuals search engine “AUTO” will maintain separate temperatures for the driver and front passenger.
Press and hold the driver’s side temperature control knob to synchronize both sides
to the same temperature and airfl ow.

TEXT A5ACC1 to 38981
Important Warnings and Safety Information, which you must read, are listed on the last panel under Automatic Climate Control.
Fan speed is the same for both zones. Fan speed can be adjusted by fi rst pressing the “FAN” button and
then adjusting the fan speed with either the driver or passenger control knob.Fan SpeedThe recirculation function prevents outside air and odors from entering the cabin. It may also be used in conjunction with AC
to cool the cabin more quickly.Recirculation
Do not text and drive. Message and data rates may apply.
Automatic
Climate Control

Downloaded from www.Manualslib.com manuals search engine Windshield Wipersš“LOW”0<hecj^[“OFF”fei_j_ed"cel[j^[m_f[hijWba
kfjmeYb_Yai$
š“HIGH”0<hecj^[“OFF”fei_j_ed"cel[j^[m_f[hijWba
kfj^h[[Yb_Yai$Continuous Wipe

Downloaded from www.Manualslib.com manuals search engine To activate, pull the control stalk
toward you.At your desired speed, press the “SET” button
at the end of the stalk. The set speed and a
green cruise symbol are shown in the Driver
Information Display.Cruise Control

Set Cruising Speed Activate

Important Warnings and Safety Information, which you must read, are listed on the last panel under cruise control.
Changing Speed
To cancel and resume cruise control:
1. Press the brake pedal or push the stalk
slightly away from you.
2. The CRUISE light will go off.
3. To resume, pull the stalk towards you;
you will return to your set speed.
Your most recently set speed appears as a
small icon in the Driver Information Display.
It remains in memory until you turn your
Audi off.Cancel/Resume
There are three ways to change your
speed:
1. Accelerate or decelerate, then press
“SET” again.
2. To increase/decrease speed in 1 mph
increments, tap the stalk up or down.
3. Hold the stalk up or down to
increase/decrease speed in 5 mph
increments; release when desired
speed is reached.
Cruise Control

Downloaded from www.Manualslib.com manuals search engine Clock Settings: MMI®
1. Press the “MENU” function button.
2. Press the Time control button.
3. Using the control knob, scroll to Time source.
4. Make sure the Time source is set to GPS.To set time with GPS:
1. Rotate the knob to Manual and select.
2. Turn the knob until you reach Time; select to activate.
3. Turn the knob to the desired hour and press set.
4. The minute display is now highlighted; repeat the selection process.
5. Save the time by pressing the control knob.To manually adjust the time:
Note: Ensure time zone is accurate for your location.
Clock Setting:
Audi concert radio
1. Press the “SETUP” function button.
2. Press the Time/Date control button to enter the Time Setup menu.
3. Rotate the control knob to time, select to highlight the hour.
4. Turn the knob to the desired hour and press to set.
5. The minute display is now highlighted; repeat the selection process.
6. Save the time by pressing the control knob.
To adjust the time:
Vehicle should be stationary with the parking brake set before performing these operations.
Clock Setting

Downloaded from www.Manualslib.com manuals search engine Brake Noise Brakes S5® onlyThe majority of today’s vehicles use semi-metallic brake pads, which offer
excellent performance. Because of the metal-to-metal contact involving
semi-metallic pads, the sounds generated by the brake system under
normal operation can be greater than the sounds produced by vehicles
equipped with previous-generation brake pads. Depending on the local
environment, weather conditions and individual driving patterns, sounds
from the braking system may be more or less apparent.
Frequent, aggressive brake application increases the wear of brake
components and can reduce the potential for brake noise. Frequent, light
brake application allows glazing to develop on the brake surface, which
increases the potential for brake noise.Brake dust is a result of friction created by brake pads
and discs during braking. As brake pads and discs
make contact during braking, they wear down, which
causes dust particles to be expelled. This is a normal
characteristic of all brake systems and is not an indicator
of a defect.Brake Dust
Brakes
Important Warnings and Safety Information, which you must read, are listed on
the last panel under Brakes.