brake AUDI A5 2013 8T / 1.G Getting To Know
[x] Cancel search | Manufacturer: AUDI, Model Year: 2013, Model line: A5, Model: AUDI A5 2013 8T / 1.GPages: 23, PDF Size: 2.4 MB
Page 6 of 23
Downloaded from www.Manualslib.com manuals search engine BLUETOOTH® Pairing MMI®Initial Setup
3. Select Audi MMI® when it
appears on the phone’s
screen.
To pair a phone: 1. Switch ignition to accessories mode.
2. Activate your phone’s BLUETOOTH® function
and set to Pairing or Search mode.
Do not text and drive. Message and data rates may apply.
See your phone’s owner manual for specifi c pairing instructions. Vehicle should be stationary with the parking brake engaged while performing this operation.
TEXT A5NAV1 to 38981
BLUETOOTH® pairing is a one-time procedure. Once paired via BLUETOOTH®, your phone will
automatically connect when you start your vehicle and your phone’s contacts automatically
synchronize, allowing you to retrieve contacts and make and receive calls through the infotainment
system.
For more information regarding phone compatibility visit audiusa.com/bluetooth.
4. The Audi MMI® system
will indicate a PIN number
is required and ask, Would
you like to connect? Use
the MMI® control knob to
select Yes.
5. Confi rm the six-digit PIN
displayed matches the PIN
displayed on your phone,
and select Yes using the
control knob.
Note: Once paired, the BLUETOOTH® symbol appears in the MMI® screen along with network strength bars, and it will be displayed whenever a paired phone is connected to the infotainment system.
6. Select Pair on your phone
to complete the pairing
process.
- $
Page 11 of 23
Downloaded from www.Manualslib.com manuals search engine Audi connect® can provide you with Google Earth™, Google Voice™
Local Search, Wi-Fi Hotspot, Online Services (fuel prices, weather
information, travel information, news feeds), and myAudi
Destinations.
TEXT A5ACT1 to 38981
Do not text and drive. Message and data rates may apply.
Audi connect®
Confi guration:
Audi connect®Initial Setup
Note: Vehicle should be stationary with the parking brake set before
performing these operations.
Audi connect®
1. Ensure SIM card (provided by dealer) is
present in the SIM slot.
2. Press the “TEL” button.
3. Press the “Settings” control button.
Page 18 of 23
Downloaded from www.Manualslib.com manuals search engine To activate, pull the control stalk
toward you.At your desired speed, press the “SET” button
at the end of the stalk. The set speed and a
green cruise symbol are shown in the Driver
Information Display.Cruise Control
Set Cruising Speed Activate
Important Warnings and Safety Information, which you must read, are listed on the last panel under cruise control.
Changing Speed
To cancel and resume cruise control:
1. Press the brake pedal or push the stalk
slightly away from you.
2. The CRUISE light will go off.
3. To resume, pull the stalk towards you;
you will return to your set speed.
Your most recently set speed appears as a
small icon in the Driver Information Display.
It remains in memory until you turn your
Audi off.Cancel/Resume
There are three ways to change your
speed:
1. Accelerate or decelerate, then press
“SET” again.
2. To increase/decrease speed in 1 mph
increments, tap the stalk up or down.
3. Hold the stalk up or down to
increase/decrease speed in 5 mph
increments; release when desired
speed is reached.
Cruise Control
Page 19 of 23
Downloaded from www.Manualslib.com manuals search engine Clock Settings: MMI®
1. Press the “MENU” function button.
2. Press the Time control button.
3. Using the control knob, scroll to Time source.
4. Make sure the Time source is set to GPS.To set time with GPS:
1. Rotate the knob to Manual and select.
2. Turn the knob until you reach Time; select to activate.
3. Turn the knob to the desired hour and press set.
4. The minute display is now highlighted; repeat the selection process.
5. Save the time by pressing the control knob.To manually adjust the time:
Note: Ensure time zone is accurate for your location.
Clock Setting:
Audi concert radio
1. Press the “SETUP” function button.
2. Press the Time/Date control button to enter the Time Setup menu.
3. Rotate the control knob to time, select to highlight the hour.
4. Turn the knob to the desired hour and press to set.
5. The minute display is now highlighted; repeat the selection process.
6. Save the time by pressing the control knob.
To adjust the time:
Vehicle should be stationary with the parking brake set before performing these operations.
Clock Setting
Page 20 of 23
Downloaded from www.Manualslib.com manuals search engine Brake Noise Brakes S5® onlyThe majority of today’s vehicles use semi-metallic brake pads, which offer
excellent performance. Because of the metal-to-metal contact involving
semi-metallic pads, the sounds generated by the brake system under
normal operation can be greater than the sounds produced by vehicles
equipped with previous-generation brake pads. Depending on the local
environment, weather conditions and individual driving patterns, sounds
from the braking system may be more or less apparent.
Frequent, aggressive brake application increases the wear of brake
components and can reduce the potential for brake noise. Frequent, light
brake application allows glazing to develop on the brake surface, which
increases the potential for brake noise.Brake dust is a result of friction created by brake pads
and discs during braking. As brake pads and discs
make contact during braking, they wear down, which
causes dust particles to be expelled. This is a normal
characteristic of all brake systems and is not an indicator
of a defect.Brake Dust
Brakes
Important Warnings and Safety Information, which you must read, are listed on
the last panel under Brakes.