spare wheel AUDI A5 CABRIOLET 2013 User Guide

250 What do I do n ow ?
jack, always fully set the parking brake
and block the wheel diagonally opposite the wheel being changed with the fold­
ing chocks or other objects . When one
front wheel is lifted off the ground, plac­
ing the Automatic Transmiss ion in "P"
(Park) will
not prevent the vehicle from
moving.
- Before yo u change a wheel, be su re the
ground is leve l and firm. If necessa ry,
use a st urdy board under the jack.
- Always store the vehicle tool kit, the
jack * and the replaced ti re in the l uggage
compartment
r=>page 12 7.
(D Note
If you are chang ing the wheel on a steep
incline, use a rock or s imilar object to
bloc k the opposite wheel to prevent the
veh icle from mov ing.
@ Tips
Obey a ll laws.
Changing a wheel
When you change a wheel, follow these­
quence described below step-by-step and in
exactly tha t order .
1. Remove the decorativ e wheel c over* or
the
wheel bol t cap s* . Fo r more details see
a lso
r=> page 250, Decorative wheel cov­
ers
or ¢ page 251, Wheels with wheel
bolt caps.
2 . Loosen the wheel bo lts r=> page 251.
3 . Locate the proper mount ing point for the
jack and align the jack below that point
r=> page 252.
4 . Lift the car with the jack r=> page 252.
5. Remove the wheel with th e flat tire and
then i nstall the
spar e tire r=> page 253 .
6. Tighten all wheel bo lts light ly .
7 .
Low er the ve hicle w it h the jack.
8 . Use the wheel bolt wrench an d
firmly
tighte n all whee l bolts in a crisscross pa t­
tern
r=> page 251.
9. Replace the decorative wheel c over* or
the
wheel bolt cap s*.
A WARNING
A lways read and follow all WARNINGS and
i nformation
r=> .& in Raising the vehicle on
page 252
and r=> page 254.
After changing a wheel
A wheel change is not complete without the
doing the following.
.. Always store the vehicle tool kit, the jack*,
and the replaced tire in the luggage com­
partment
r=> page 127.
.,. Check the tire pressure of the spare tire as
soon as possible .
"' As soon as poss ible, have the
tighteni ng
torqu es
on all wheel bolts checked w ith a
t orque wrenc h. The correct tig hte ning tor­
que is
90 ft lbs. (120 Nm).
.,. Have the flat tire
repl aced as soon as possi­
b le.
(D Tips
- If
you not ice that the wheel bo lts ar e
corroded and difficult to turn while
changing a tire, they shou ld be rep laced
before you check the tightening torque.
- Dr ive at reduced speed until you have the
tightening torques checked .
Decorative wheel covers
Applies to vehicles: w ith decorative w hee l covers
The decorative wheel covers must be removed
first to access the wheel bolts .
Fig. 19 0 Cha nging a whee l: removing t he w heel cove r Ill>

CD Note
Do not lift the vehicle by the sill. Position
the vehicle jack only at the designated lift ­
ing points on the sill. Otherwise , your vehi­
cle will be damaged.
Taking the wheel off/installing the spare
tire
Follow these instructions step -by -step for
changing the wheel.
Fig . 195 Ch ang ing a w hee l: us ing the sc rewdriver han ­
d le (with the blade removed) to turn t he bo lts
Fig . 196 Ch ang ing a w hee l: al ig nme nt pin inside t he
top hole
After you have loosened a ll wheel bolts and
ra ised the veh icle off the ground, remove and
replace the wheel as follows:
R emoving th e wheel
.. Remove the topmost wheel bo lt completely
with the
he xagonal sock et in the screwdriv­
er handle (vehicle tool kit)
¢ fig. 195 and
set it as ide on a
clean surface.
.. Screw the threaded end of the
alig nm ent
pin from the tool kit hand -tight into the
empty bolt hole
¢ fig . 196.
.. Then remove the other wheel bo lts as de­
scribed above.
What do I d o now ? 253
.. Take off the wheel leaving the alignment
pin in the bolt hole ¢(D.
Putting on th e spar e tire
.. Push the spare tire over the alignment p in.
.. Sc rew on the wheel bo lts and tighten them
slightly us ing the hexagonal socket .
.. Remove the alignment pin and insert and
tighten the rema ining wheel bolt slightly
like the rest.
.. Turn the jack hand le counter-clockwise to
lower the veh icle until the jack is fully re­
leased .
.. Use the wheel bolt wrench to tighten all
wheel bo lts firm ly
¢page 251. Tighten
them
in a crisscross pattern, from one bolt
to the (approximately) opposite one, to keep
the wheel centered .
.. Perform the steps required after changing
the whee l¢
page 250, After changing o
wheel.
T he hexagonal socket makes it easier to re­
move t he wheel bolts from the rim . Care
shou ld be taken when removing the reversib le
blade .
CD Note
When removin g or i nstalling the whee l,
the r im cou ld hit the brake rotor and dam­
age the rotor. Work carefully and have a
second person to help you.
{l) Tips
- When mounting tires with unidirection al
tread de sign
make sure the tread pat­
tern is po inted the right way
¢ page 254.
-The wheel bolts shou ld be clean and easy
to turn. Check for dirt and corrosion on
the mating surfaces of both the wheel
and the hub . Remove all d irt from these
surfaces befo re remounting the whee l.
- Do not use the hexagonal socket in the
sc rewd river handle to loosen or t ighten
t he whee l bolts .

254 What do I do now? Tires with unidirectional tread design
Tires with unidirectional tread design must be
mounted with their tread pattern pointed in the right direction .
Using a spare tire w ith a tread pattern
intended for use in a specific direction
When using a spa re tire w ith a t read patte rn
i n tended fo r use in a specific direction, please
n ote t he followi ng:
- The direction of rotation is marked by a n
ar­
row on the side of the tire .
-If the spare t ire has to be installed in the in­
correct direction, use the spare tire only
tempora rily si nce the t ire will not be able to
achi eve its optimum perfo rma nce cha racter­
i st ics w ith reg ard t o aquaplani ng, noise and
we ar.
- W e reco mmend t hat you pay pa rticular at­
ten tion t o this fact during wet we ather and
t h at you a dju st you r spee d to m atc h ro ad
con ditions.
- R epl ace the fla t tire w ith a n ew one an d
have it ins talled o n your ve hicle as soon as
p oss ible to restore the handlin g ad vantages
of a uni direct io na l tire .
Notes on wheel changing
Please rea d the information c> page 238 , New
t ires and replacing tires and wheels
if you are
go ing t o use a spare tire which is d ifferent
from the tires on your ve hicle.
Afte r you chan ge a t ire :
-Check the tire pressure on the spare imme­
diately after installation.
- Have the wheel bolt tightening torque
checked with a torque wrench as soon as possible by your authorized Audi dealer or
a qualified workshop .
- With steel and alloy wheel rims , the wheel
bolts are correctly tightened at a torque of
90 ft lbs . (120 Nm) .
- If you notice that the wheel bolts are cor­
roded and difficult to turn while changing
a tire, they should be replaced before you
check the tightening torque . -
Replace the flat tire with a new one and
have it installed on your vehicle as soon as
possible. Remount the wheel cover .
Until then , drive with extra care and at re­
duced speeds.
_& WARNING
-
- If yo u are going to e quip your ve hicl e
with tires o r rims which differ from those
which were facto ry installed, then be
sure to read the informati on
¢ page 238,
New tir es and replacing tires and
w he els .
- Always ma ke sure the damaged wheel o r
even a flat tire a nd the jack a nd tool kit
a re pro pe rly s ecu red in the luggage co m­
p artm ent and are not lo ose in the pas ­
s en ger c ompa rtm en t.
- I n an acci dent or sudde n man euve r they
co uld fly forwa rd, inju ring anyone in the
ve hicl e.
- Always s to re damaged wh ee l, j ack and
t oo ls se cur ely in the l uggage co mpa rt­
ment. Otherwise, in an accident or su d­
de n maneuve r they co uld fly forwa rd,
causing inj ury to passe ngers in the ve hi­
cle.
(D Note
Do not use comm erc ia lly availabl e tire
sea lants. O therwise, t he e lectr ical co mpo ­
n ents of t he ti re pressu re mo nitoring sys­
tem * w ill no longe r work proper ly an d the
sensor fo r the tire pressure mo nitor ing
system* will have t o be replaced by a
q ualified wor ks ho p.

276 Index
Changing a wheel
Changing engine oil
Chassis 249
218
Undercoating .............. .. .... . 201
Checking Eng ine coolant leve l ...... ... .. .... . 219
Checking tire pressure ....... ..... .. . 233
Child restraints Danger of using child restraints in the
front seat . . . . . . . . . . . . . . . . . . . . . . . . 141
Where can I get add itional information
about child restraints and their use? . . 178
Child restraint system anchors ... .. .. . 175
Ch ild safety .. ............. .. .. .. .. . 161
Convertible locking retractor . ..... ... 17 1
Important safety instructions for using
child safety seats ................. . 164
Important things to know when driving
with children .............. .. .... . 161
Installing a child restraint using the
L ATCH system ......... .... ... .. .. . 177
Lower anchorages ............ .. ... 176
Mounting and releasing the anchorage
hook .. .... ... .......... .. .. .. .. . 177
Ch ild safety seats . ..... .... .. .. .... . 167
Booster seats ............. ... .. ... 169
Convertible ch ild seats . . . . . . . . . . . . . 168
Conve rtible locking retractor .. .. .. .. . 171
Danger of using child restra ints in the
front seat .... ............. ...... . 141
How do I properly install a child safety
seat in my vehicle? ................. 164
Infant seats .............. ... .. .. . 167
Installing . . . . . . . . . . . . . . . . . . . . . . . . 171
LATCH system ............ .. .. .. .. . 177
Safety instructions .. ...... .. .. .. .. . 164
Unused safety belts on the rear seat .. 166
Cigarette lighter . . . . . . . . . . . . . . . . . . . . . 66
C leaning
A lcantara® (synthe tic suede) .. .. .. .. . 204
E ngine compartment ............ .. . 205
Exhaust tail pipes ........... .. .... . 201
Fabrics and fabric coverings . ..... .. . 202
Instrument panel ........... .. .... . 202
Interior .. ............... .. .. .... . 201
Leather .... .......... ...... ... .. . 204
Matte finish pa int ......... ... .. ... 197
MMI disp lay/controls .. .... .. .. .. .. . 201 Plastic
and vinyl . . . . . . . . . . . . . . . . . . . 199
Plastic parts ..... ................ . 202
Safety be lts ... .. ................ . 205
Trim strips .... .. ............. .... 199
Cleaning and protection .......... .... 194
Climate controls ... ..... ........... .. 70
Climate control system Automatic recircu lation ......... .... . 73
Supplementary heater ........ .. .. .. . 73
synchroni zing . . . . . . . . . . . . . . . . . . . . . . 73
Clock ..... ..... .. .. .............. .. 12
Closing Power windows .. ............. .. .. . 39
Closing/opening at the lock cylinder ................ .. 36
by remote control . . . . . . . . . . . . . . . . . . 34
with the centra l locking switch ........ 35
with the conven ience key ........ .... . 35
Cold tire inflation pressure ........ .... 231
Coming home . . . . . . . . . . . . . . . . . . . . . . . 53
Compact spare tire . ................ . 248
also refer to Spare tire . ...... ... .. .. 248
Compass in the mirror ........... .... . 59
Compliance ... .. .. .. .............. . 272
Consumer Information . . . . . . . . . . 129, 269
Contacting NHTSA ................. . 129
Convenience key
Indicator lights .. ... .......... .. .. . 79
Starting engine (S TART ENGINE STOP
button) ....... .. .. .............. .. 78
Stopping the engine (START ENGINE
STOP button) . . . . . . . . . . . . . . . . . . . . . . 79
Switching on ignition ........... .... . 78
unlocking/locking ... ... .... ... .. .. . 35
Convenience opening/closing ....... .. . 40
Convertib le child safety seats ......... 168
Convertible locking retractor Activating ..... .. ............. .... 173
Deactivating . .. .. ..... ........... . 173
Using to secure a child safety seat 1.71, 173
Coolant system . ... ................ . 219
Cooling mode (automat ic climate control) 71
Cooling System Expansion tank . .. ................ . 219
Cornering light . . . . . . . . . . . . . . . . . . . . . . 52

284 Index
Sound system display . . . . . . . . . . . . . . . . . 24
Sources of information about child re-
straints and their use ......... .. .... . 178
Spare tire .. ................. .. .... . 248
Speedometer . . . . . . . . . . . . . . . . . . . . . . . 12
Speed rating letter code ...... ..... .. . 239
Speed warn ing system ...... .. .. .... .. 82
Sport different ial ........ .. .. .. .. .. . 107
I ndicator lamp . . . . . . . . . . . . . . . . . . . . . 22
START ENGINE STOP button (convenience
key) ...... .. ................ ... ... . 79
STAR T ENGIN E ST OP button (Convenience
key) .. .. .. .. ............. .. .. .. ... . 78
Starting from rest .............. .... .. 81
Starting off with a tra iler .... .. .. .. .. . . 82
Starting the engine . . . . . . . . . . . . . . 75, 78
Steer ing
L ack ing the steer ing . . . . . . . . . . . . . . . . 7 5
also refer to Electro-mechanical power
assist ..... ................ ..... . 183
Steering wheel
Adjusting steering column ... .. .. .. . . 75
I ndicator light . . . . . . . . . . . . . . . . 18, 183
Steps for determining correct load limit . 236
Stopp ing the engine . . . . . . . . . . . . . . 77, 79
Storage ... .... ........... .... .... .. 66
S tronic . .. ................. .. .... .. 86
Selector lever . . . . . . . . . . . . . . . . . . . . . . 86
S tron ic transmission
Emergency release . . . . . . . . . . . . . . . . . . 92
Launch Control Program ... .. .. .... .. 91
Sun visors .... ............ .. .. .. .. .. 57
Symbols
refer to Warni ng/ind icator lights .. .. . . 13
T
Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . 11
Technical modifications .............. 272
The first 1,000 miles (1,500 km) and after-
wards ... .. ... ............ .. .. .. .. . 187
Tie-downs . . . . . . . . . . . . . . . . . . . . . 68, 128
tiptronic . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Automatic Shift Lock (ASL) . . . . . . . . . . . 87
Driving .. .. ................ ..... .. 88
Emergency mode . . . . . . . . . . . . . . . . . . . 92 Manual
shift program ............ .. . 90
Se lector lever . . . . . . . . . . . . . . . . . . . . . . 86
T ire pressure .... .. ............. .... 233
Tire pressure monitoring system Loss of air pressure . .. ...... ... .. .. 246
Malfunction ... .. ..... ........... . 246
Resetting tire pressures ............ . 247
Tires ....... .... .. ................. 227
Low aspect ratio tires . . . . . . . . . . . . . . . 244
Service life .... .. ... .......... .... 237
Speed rating letter code ...... ... ... 239
Tire manufacturing date ...... ... ... 239
T ire pressure monitoring system . .. .. 245
T ire specifications .. ........... .. .. 239
T read depth ... .. ............. .... 237
Uniform tire quality grading ......... 241
Winter tires ..... ................ . 242
T ires and vehicle load limits ..... .. .. .. 235
Tires and wheels Checking tire pressure .......... .... 233
Cold tire inflation pressure .......... 231
Dimens ions .. .. .. ....... ...... .. .. 238
Genera l notes .. .. .... ...... ... .. .. 227
Glossary of tire and loading terminolo-
gy ....... .. .. .. .. ... ............ 228
New tires and wheels .............. . 238
Replacing ..... .. ............. .... 239
Snow chains ..... ................ . 243
Tires and veh icle load limits ..... .... 235
Wheel bolts . . . . . . . . . . . . . . . . . . . . . . 244
Win ter tires ..... ............. .... 242
Tire service life .... ................ . 23 7
Tool kit ....... ... ................ . 248
Torn or frayed safety belts ........ .... 135
T o uch -up pa int .. .. ... .......... .. .. 199
Towing Front eyelet ... .. ....... ...... .. .. 262
Rear eyelet .. .. .. ............. .. .. 262
T ow t ruck procedures ............. .. 261
TPMS Tire pressure monitoring system ..... 246
T railer towing ..... ................ . 191
Operating instructions .......... .... 191
Technical requirements . . . . . . . . 191, 192
Tips .. .... .... .. ............. .... 193