ignition AUDI A6 1995 C5 / 2.G ATQ Engine Motronic Injection System Servicing User Guide

24-62

- Repair open circuit or short circuit if
necessary.

Note:
Ground (GND) from the ECM is present at terminal 2 of connector.
If specified value is not obtained: - Connect multimeter to terminal 2 and terminal 3 of connector for
voltage measurement.
- Operate starter briefly.

Specification: approx. battery voltage
- Check wire connections Page 24
-63
.

If specified value is not obtained: - Connect multimeter to terminal 1 and terminal 2 of connector for
voltage measurement.
- Switch ignition on.

Specification: about 5 V
- Check wire connections Page 24
-63
.
Pa
ge 74 of 78 Motronic in
jection s
ystem, servicin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.1

24-64

Intake air system, checking for leaks
(unmetered air)


Special tools and equipment

Notes:
VAS5051 with VAG5051/1
orVAG1551 with VAG1551/3BEngine leak detection spray G 001 800 A1The negative pressure in the intake system sucks in the leak detection
spray with the unmetered air. Leak detection spray decreases ignition
quality and performance of the fuel mixture. This causes a reduction in
engine speed and a sharp increase of CO content. It is absolutely necessary to follow the safety precautions listed on the
can.
Pa
ge 76 of 78 Motronic in
jection s
ystem, servicin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.1

24-66
If engine speed does not change:

-
Press button.Rapid data transfer
HELP
Select function XX

Indicated on display (function selection):
If engine speed decreases:
-
Press button.- Press buttons -0- and -6- to select "End output" and press -Q- button to
confirm input.
- Switch ignition off.
- Check sprayed part of intake system for leaks, and eliminate the error.
Pa
ge 78 of 78 Motronic in
jection s
ystem, servicin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.1