tow AUDI A6 1996 C5 / 2.G 01V Transmission Rear Differential Assembly Workshop Manual

39-150


Note:
Do not rearrange differential bevel gears and thrust washers again!
Parts-catalog Fig. 12 Adjusting differential bevel gears
- Install large differential bevel gears with the thinnest shims (0.5 mm).
-
Insert small differential bevel gears 180 from final position together
with thrust washers. - Drive in shaft for differential bevel gears.
- Press the small differential bevel gears toward the outside.
- Push large differential bevel gears in direction of arrow and check play.
- Determine the largest possible shim that can still be installed for the
large differential bevel gears on each side.

Adjustment shims should be the same thickness on both sides.
- Determine adjustment shims according to table. Part numbers
Pa
ge 15 of 16 Differential, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.13