ECU AUDI A6 1996 C5 / 2.G 01V Transmission Rear Differential Remove And Install Workshop Manual

39-128


Differential, removing and
installing Notes:

General repair notes page 00
-27
.
Secure final drive to assembly stand page 39
-123
.
Adjustments are required when replacing
components marked with
1) Adjustment
overview page 39
-170
.
1 -
Breather sleeve
With rubber valveInstalled position Item
2 -
Final drive housing
1)
With drive pinionDrive pinion, removing and installing
page 39
-152

Pa
ge 1 of 8 Differential, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.12

39-132


Fig. 1 Removing and installing drive flange
- To loosen securing bolt, thread 2 bolts into drive flange and counter
hold using tire iron.
- Remove drive flange at installed bolts.

Fig. 2 Press in cover up to stop
Pa
ge 5 of 8 Differential, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.12

39-134

Differential, removing and installing

Rear final drive removed

Special tools and equipment

Removing
VAG1306 drip tray
- Secure complete rear final drive to assembly stand page 39
-123
.
- Place VAG1306 drip tray underneath and drain gear oil.

- Remove left and right drive flanges.
- To loosen securing bolt, thread 2 bolts into drive flange and counter
hold using tire iron.
- Mark left and right drive flanges.
- Remove drive flange at installed bolts.
- Remove mounting bolts for final drive cover.
- Remove final drive cover from axle housing and remove differential.
Pa
ge 7 of 8 Differential, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.12