torque AUDI A6 1996 C5 / 2.G 01V Transmission Torque Tube Remove And Install Workshop Manual

39-95


Torque tube, removing and
installing Assembly overview

1 -
Bolt - 40 Nm
2 -
Front crossmember
3 -
Bolt - 40 Nm
4 -
Transmission support
5 -
Torque tube
6 -
Rear final drive housing
7 -
O-ring
8 -
Bolt - 35 Nm
9 -
Bolt - 23 Nm
10 -
Bracket
For exhaust system
Pa
ge 1 of 7 Tor
que tube, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.7

39-99

- Lower final drive approx. 10 cm.

Note:
The 4. bolt is not visible in the illustration. - Remove 4 bolts for torque tube 1 to 3.

- Pull off flange shaft with torque tube.
Pa
ge 5 of 7 Tor
que tube, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.7

39-101

- Install exhaust system free of stress:

Repair Manual, Engine Mechanical, Repair
Group 26; removing and installing exhaust
system
- Top-up and check gear oil in rear final drive
page 39
-94
.

Tightening torques

Component
Nm
Torque tube to rear final drive 35
Driveshaft to final drive
(Input flange) 55
Front crossmember for rear final drive to
body 40
Front crossmember for rear final drive with
exhaust system bracket to body 23
Oil filler plug 35
Nuts for clamping sleeve 40
Pa
ge 7 of 7 Tor
que tube, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.7