buttons AUDI A6 1997 C5 / 2.G ATQ Engine Ignition System Checking Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 1997, Model line: A6, Model: AUDI A6 1997 C5 / 2.GPages: 65, PDF Size: 0.53 MB
Page 18 of 65
28-15
Component location Overview of Component
Locations, page Page 24
-5
Test sequence
- Connect VAS5051 tester or VAG1551 scan tool
and select the control module for engine
electronics using "address word" 01 Page 01
-
9 .
Ignition must remain switched on for this.Rapid data transfer
HELP
Select function XX
When indicated on display:
- Press buttons -0- and -8- to select "Read Measuring Value Block" and
press -Q- button to confirm input.
Read Measurin
g Value Block
Q
Input display group number XXX
When indicated on display:
- Press buttons -0-, -0- and -4- to select "display group number 004" and
press -Q- button to confirm input.
Read Measuring Value Block 4
1
2
3
4
Indicated on display:
- Check specified value for Intake Air Temperature (IAT) sensor in
display field 4:
Pa
ge 18 of 65 I
gnition s
ystem, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.28.1
Page 27 of 65
28-24
Component location Overview of Component
Locations, page Page 24
-5
Test requirement:
Engine cold
Test sequence
- Connect VAS5051 tester or VAG1551 scan tool
and select the control module for engine
electronics using "address word" 01 Page 01
-
9 .
Engine must run at idle for this.Rapid data transfer
HELP
Select function XX
When indicated on display:
- Press buttons -0- and -8- to select "Read Measuring Value Block" and
press -Q- button to confirm input.
Read Measurin
g Value Block
Q
Input display group number XXX
When indicated on display:
- Press buttons -0-, -0- and -4- to select "display group number 004" and
press -Q- button to confirm input.
Read Measuring Value Block 4
1
2
3
4
Indicated on display:
- Check indication in display field 3.
Pa
ge 27 of 65 I
gnition s
ystem, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.28.1
Page 39 of 65
28-34
Check ignition angle retardation of the
individual cylinders
- Connect VAS5051 tester or VAG1551 scan tool
and select the control module for engine
electronics using "address word" 01 Page 01
-
9 .
Engine must run at idle for this.Rapid data transfer
HELP
Select function XX
When indicated on display:
- Press buttons -0- and -8- to select "Read Measuring Value Block" and
press -Q- button to confirm input.
Read Measuring Value Block
Q
Input displa
y group number XXX
When indicated on display:
- Press buttons -0-, -2- and -0- to select "display group number 020" and
press -Q- button to confirm input.
Read Measuring Value Block 20
1
2
3
4
When indicated on display:
- Check indication in all display fields.
Pa
ge 39 of 65 I
gnition s
ystem, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.28.1
Page 40 of 65
28-35
Display fields
1 2 3 4
Display group 020: Ignition -knock control in driving operation
Display
xx.x KW
xx.x KW
xx.x KW
xx.x KW
Indicated
Ignition angle
retardation cylinder 1
via knock control
Knock sensor control Ignition angle
retardation cylinder 2
via knock control
Knock sensor control Ignition angle
retardation cylinder 3
via knock control
Knock sensor control Ignition angle
retardation cylinder 4
via knock control
Knock sensor control
Specified
value 0 to 12 KW
0 to 12 KW
0 to 12 KW
0 to 12 KW
Notes Evaluation Page 28
-40
Note:
The number values indicated in display fields 1 to 4 represent actual ignition angle retardation via knock control of the
individual cylinders. Ignition angle retardation occurs in KW (crankshaft degrees) toward retardation.
- Press -C- button.Read Measuring Value Block
Q
Input display group number XXX
When indicated on display:
- Press buttons -0-, -2- and -1- to select "display group number 021" and press -
Q- button to confirm input.
Read Measuring Value Block 21
1
2
3
4
When indicated on display:
- Check indication in display field 1 and 2.
Pa
ge 40 of 65 I
gnition s
ystem, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.28.1
Page 41 of 65
28-36
Display fields
1 2 3 4
Display group 021: Ignition -knock control in driving operation
Display
xx.x KW
xx.x KW
Indicated
Ignition angle retardation cylinder 5 via
knock control
Knock sensor control Ignition angle retardation cylinder 6 via
knock control
Knock sensor control
Specified
value 0 to 12 KW
0 to 12 KW
Notes Evaluation Page 28
-40
Note:
The number values indicated in display fields 1 and 2 represent actual ignition angle retardation via knock control of the
individual cylinders. Ignition angle retardation occurs in KW (crankshaft degrees) toward retardation.
- Press -C- button.Read Measurin
g Value Block
Q
Input displa
y group number XXX
When indicated on display:
- Press buttons -0-, -2- and -2- to select "display group number 022" and press -Q-
button to confirm input.
Read Measuring Value Block 22
1
2
3
4
When indicated on display:
- Check indications in display field 3 and 4.
Pa
ge 41 of 65 I
gnition s
ystem, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.28.1
Page 42 of 65
28-37
Display fields
1 2 3 4
Display group 022: Ignition -knock control in driving operation
Display xxxx/min xxx.x %
xx.x KW
xx.x KW
Indicated Engine speed
(RPM) Engine
load Ignition angle retardation cylinder 1
via knock control
Knock sensor control Ignition angle retardation cylinder 2
via knock control
Knock sensor control
Specified
value xxxx/min 12 to 100
% 0 to 12 KW
0 to 12 KW
Notes Evaluation Page 28
-40
Note:
The number values indicated in display fields 3 and 4 represent actual ignition angle retardation via knock control of cylinders
1 and 2. Ignition angle retardation occurs in KW (crankshaft degrees) toward retardation.
- Press -C- button.Read Measurin
g Value Block
Q
Input displa
y group number XXX
When indicated on display:
- Press buttons -0-, -2- and -3- to select "display group number 023" and press -Q-
button to confirm input.
Read Measuring Value Block 23
1
2
3
4
When indicated on display:
- Check indications in display field 3 and 4.
Pa
ge 42 of 65 I
gnition s
ystem, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.28.1
Page 43 of 65
28-38
Display fields
1 2 3 4
Display group 023: Ignition -knock control in driving operation
Display xxxx/min xxx.x %
xx.x KW
xx.x KW
Indicated Engine speed
(RPM) Engine
load Ignition angle retardation cylinder 3
via knock control
Knock sensor control Ignition angle retardation cylinder 4
via knock control
Knock sensor control
Specified
value xxxx/min 12 to 100
% 0 to 12 KW
0 to 12 KW
Notes Evaluation Page 28
-40
Note:
The number values indicated in display fields 3 and 4 represent actual ignition angle retardation via knock control of cylinders
3 and 4. Ignition angle retardation occurs in KW (crankshaft degrees) toward retardation.
- Press -C- button.Read Measurin
g Value Block
Q
Input displa
y group number XXX
When indicated on display:
- Press buttons -0-, -2- and -4- to select "display group number 024" and press -Q-
button to confirm input.
Read Measuring Value Block 24
1
2
3
4
When indicated on display:
- Check indications in display field 3 and 4.
Pa
ge 43 of 65 I
gnition s
ystem, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.28.1
Page 56 of 65
28-50
- Repair open circuit or short circuit if
necessary.
- If, after erasing DTC memory for the sake of the
test, a DTC relating to the Camshaft Position
(CMP) sensor (hall sensor) is indicated again,
even though all previous tests were OK, the
following malfunction is possible:
Shutter wheel for Camshaft Position (CMP)
sensor is not aligned properly.
Check phase position of Camshaft Position
(CMP) sensor
- Connect VAS5051 tester or VAG1551 scan tool
and select the control module for engine
electronics using "address word" 01 Page 01
-
9 .
Engine must run at idle for this.Rapid data transfer
HELP
Select function XX
When indicated on display:
- Press buttons -0- and -8- to select "Read Measuring Value Block" and
press -Q- button to confirm input.
Read Measurin
g Value Block
Q
Input display group number XXX
When indicated on display:
Pa
ge 56 of 65 I
gnition s
ystem, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.28.1
Page 57 of 65
- Press buttons -0-, -9- and -3- to select "display group number 093" and
press -Q- button to confirm input.
Read Measuring Value Block 93
1
2
3
4
When indicated on display:
- Check specified values of Camshaft Position (CMP) sensor
Pa
ge 57 of 65 I
gnition s
ystem, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.28.1
Page 60 of 65
28-52
Misfire recognition, checking
Test sequence
- Connect VAS5051 tester or VAG1551 scan tool
and select the control module for engine
electronics using "address word" 01 Page 01
-
9 .
Engine must run at idle for this.Rapid data transfer
HELP
Select function XX
When indicated on display:
- Press buttons -0- and -8- to select "Read measuring value block"
function 08. Press -Q- button to confirm input.
Read Measuring Value Block
Q
Input displa
y group number XXX
When indicated on display:
- Press buttons -0-, -1- and -4- to select "display group number 014" and
press -Q- button to confirm input.
Read Measuring Value Block 14
1
2
3
4
When indicated on display:
- Check misfire recognition in display fields 3 and 4.
Pa
ge 60 of 65 I
gnition s
ystem, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.28.1