light AUDI A6 1998 C5 / 2.G 01E Transmission Final Driveshaft Service Workshop Manual

39-70

- Loosen securing bolts on both driveshaft
flanges.

- Unscrew three upper securing bolts on each
driveshaft constant velocity joint.

- Loosen securing bolts of center driveshaft
mounting slightly.

Note:
Never fit assembly appliance onto balance plates.
Note:
Only transport and store driveshaft when extended. - Attach assembly appliance 3405 and tighten the plastic nuts.
- Remove securing bolts of flange to transmission and to rear final drive
as well as securing bolts of center driveshaft mounting.
- Slide driveshaft together toward rear final drive. Constant velocity joints
move along their axis.
- Guide out driveshaft with assembly appliance past transmission flange.
Pa
ge 8 of 19 Driveshaft, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.9

39-76

- Loosen securing bolts of center driveshaft
mounting slightly.

Note:
Never fit assembly appliance onto balance plates. - Attach assembly appliance 3405 and tighten the plastic nuts.
- Remove securing bolts and shims from center mounting.

Parts catalog - Align center driveshaft mounting so that distance -a- is the same on left
and right.
- Measure -a- on both sides.
- Select shims from table.
Pa
ge 16 of 19 Driveshaft, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.9