light AUDI A6 1998 C5 / 2.G 01V Transmission Rear Differential Assembly Workshop Manual

39-140


Parts-catalog 4 -
Shim "S2"
Note thicknessAdjustment overview page 39
-170
5 -
Small tapered roller bearing outer race
1)
Driving out Fig. 1Pressing in Fig. 2
6 -
Small tapered roller bearing inner race
1)
Pulling off Fig. 3Pressing on Fig. 4
7 -
Bolt - tighten to 60 Nm and then tighten an
additional 45-5.
Always replaceAllocationLightly tighten bolts then tighten diagonally
to correct torque.
Pa
ge 5 of 16 Differential, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.13

39-144


Fig. 1 Driving small tapered roller bearing outer race out of
housing
- Check adjustment shims for damage after removing.

Fig. 2 Pressing tapered roller bearing outer race into housing
- Install outer race with VW295 needle bearing drift by tapping lightly
using hammer.
- Then drive in to stop, as shown in illustration.
Pa
ge 9 of 16 Differential, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.13