brake AUDI A6 1998 C5 / 2.G 01V Transmission Select Lever Mechanism Workshop Manual

37-1


Selector lever mechanism,
servicing

WARNING!

Shift selector lever into position "P" and
engage parking brake before working with the
engine running.

Notes:

Lubricate bearing areas and slide surfaces with
polycarbamide grease G 052 142 A2.
Center console must be removed for service
work:

Ignition key removal lock, checking


- Switch ignition key to driving position (ignition
on).

- Depress brake pedal and hold.

Shifting selector lever out of position "P"
must be possible with the button at shift lever
depressed without "sticking".
It must not be possible to remove ignition
Pa
ge 1 of 75 Selector lever mechanism, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.1

key with selector lever in any position other
than "P".

- Shift selector lever into position "P".
It must be possible to move ignition key into
removal position without "sticking".

- Remove ignition key.
Selector lever cannot be shifted out of
position "P" with the button pressed and foot
brake operated.
Pa
ge 2 of 75 Selector lever mechanism, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.1

37-2

Shift mechanism, checking


Selector lever in position "P" and ignition
switched on:

Brake pedal is not being operated:

Selector lever is locked and cannot be shifted
out of position "P" with the button at selector
lever pressed. Shift lock solenoid is locking the
selector lever.
Brake pedal is being operated:

Shift lock solenoid enables the selector lever.
Selecting a driving mode must be possible with
the button at shift handle pressed without
"sticking".

Slowly shift selector lever through "P" via " R, N,
D, 4, 3, 2", while checking if the selector lever
position in instrument cluster matches with the
selector lever position.
Pa
ge 3 of 75 Selector lever mechanism, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.1

37-3

Selector lever in position "N" and ignition
switched on:

Brake pedal is not being operated:

Selector lever is locked and cannot be shifted
out of position "N" with the button at selector
lever handle pressed. Shift lock solenoid is
locking the selector lever.
Brake pedal is being operated:

Shift lock solenoid enables the selector lever.
Selecting a driving mode must be possible with
the button at shift handle pressed without
"sticking".

Additional test only for shift mechanisms
with Tiptronic: Selector lever in position "D",
ignition and lights switched on
Start engine and let run at idle
Engage parking brake and operate brake
pedal


Guide selector lever out of selector lever
position "D" into Tiptronic gate. Brightening of
Pa
ge 4 of 75 Selector lever mechanism, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.1

37-4

Notes:

Starter must not start with selector lever in
positions "2", "3", "4", "D" and "R".
For Right Hand Drive (RHD) vehicles, it must
only be possible to start the starter with the
selector lever positions "P" and "N" with the
locking button in selector lever handle not
pressed.
For speeds exceeding 5 km/h and shifting into
selector lever position "N", the shift lock
solenoid must not engage to lock the selector
lever. Selector lever can be shifted into a
driving mode.
For speeds below 2 km/h (almost standstill) and
shifting into selector lever position "N", the shift
lock solenoid must only engage after approx. 1
second. Selector lever can only be shifted out
of position "N" with the brake pedal operated.
Pa
ge 6 of 75 Selector lever mechanism, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.1