belt AUDI A6 1998 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual

[x] Cancel search | Manufacturer: AUDI, Model Year: 1998, Model line: A6, Model: AUDI A6 1998 C5 / 2.G
Pages: 38, PDF Size: 0.74 MB
AUDI A6 1998 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual A6 1998 C5 / 2.G AUDI AUDI https://www.carmanualsonline.info/img/6/950/w960_950-0.png AUDI A6 1998 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual
Search: (clutch, tire size, battery location, USB port, airbag off, clock setting)

Page 4 of 38

AUDI A6 1998 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual 13-4 Ribbed belt for power steering pump, generator and viscous fan, and V-belt for coolant pump CAUTION! Before removing ribbed belt, note direction of rotation with chalk or felt-tip mark

Page 5 of 38

AUDI A6 1998 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual 13-5 5 - Ribbed belt Removing and installing Page 13 -15 Check for wear 6 - Special bolt Tighten to 40 Nm (30 ft lb)Only use VW bolts, bolt strength grade 10.9 parts catalog 7 - Vibrati

Page 6 of 38

AUDI A6 1998 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual 13-6 11 - Circlip For viscous fan bearingRemoving and installing Page 13 -20 12 - Bolt for belt pulley 10 Nm (7 ft lb) 13 - Bearing For viscous fanRemoving and installing Page 13 -20 14

Page 7 of 38

AUDI A6 1998 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual 13-7 Note: For easier installation of generator into the bracket, push back lower bolt bushing slightly. 17 - Generator Removing: - Disconnect battery Ground (GND) strap. - Loosen ribb

Page 11 of 38

AUDI A6 1998 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual 13-9 30 - Coolant pump With coolant regulatorRemoving and installing Page 19 -13 31 - Belt pulley For power steering pumpDesigned for ribbed beltInstall with bulged side facing in driving

Page 12 of 38

AUDI A6 1998 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual 13-10 Ribbed belt for air conditioning CAUTION! The A/C refrigerant circuit must not be opened. Before removing ribbed belt, note direction of rotation with chalk or felt-tip marker. Re

Page 13 of 38

AUDI A6 1998 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual 13-11 CAUTION! Do not let A/C compressor hang by refrigerant lines. 5 - Bracket For A/C compressor 6 - Ribbed belt tensioner Removing and installing Page 13 -15 7 - Washer 8 - Bolt 2

Page 14 of 38

AUDI A6 1998 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual 13-12 V-belt and ribbed belt, routing overview 1 - Ribbed belt tensioner 2 - Generator 3 - Viscous clutch 4 - Coolant pump 5 - Power steering pump 6 - V-belt For coolant pumpRemovin

Page 15 of 38

AUDI A6 1998 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual 13-13 8 - Vibration damper 9 - Ribbed belt tensioner For A/C compressor 10 - Ribbed belt For A/C compressor Removing and installing Page 13 -15 11 - A/C compressor Pa ge 15 of 38 En gine

Page 16 of 38

AUDI A6 1998 C5 / 2.G AEB ATW Engines Engine Assembly Workshop Manual 13-14 Fig. 1 Viscous fan, removing and installing Lock carrier in service position Page 13 -1 Ribbed belt free of tension Page 13 -15 - Secure belt pulley for viscous fan with 5 x 60 m
Page:   1-10 11-20 21-30 next >
Search: (fuel tank removal, fuel type, wheel bolts, window, towing capacity, water pump)