oil AUDI A6 1999 C5 / 2.G 01E Transmission Final Drive Pinion Assembly Workshop Manual

39-136

Note:

General repair instructions Page 00
-11
.

Removing drive flange housing from rear final
drive with final drive installed Page 39
-82
.

Removing drive flange housing from rear final
drive with final drive removed Page 39
-111
.

Replace both tapered roller bearings together.
Use same make if possible.
Do not additionally oil new tapered roller
bearings for friction torque measurement. The
bearings have already been treated with a
special oil by the manufacturer.
Removing differential Page 39
-112
.

Adjustments are required when replacing
components marked with a 1) Page 39
-150
,
Adjustment overview
Pa
ge 4 of 13 Drive
pinion, removin
g, installin
g, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.18

39-143


Fig. 9 Pressing in outer race for small tapered roller bearing
- Lubricate outer race with oil and fit using press tool VW 408 A and
thrust plate 30-205.

CAUTION!
Wear protective gloves. Fig. 10 Pressing on small tapered roller bearing inner race
- Insert drive pinion with new spacer sleeve.
-
Heat inner race for small tapered roller bearing to approx. 100 C and
fit onto drive pinion. - Press up drive pinion and insert bearing with thrust plate 40-21 onto
stop.
Pa
ge 11 of 13 Drive
pinion, removin
g, installin
g, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.18