weight AUDI A6 1999 C5 / 2.G 01E Transmission Final Seal Grooved Ball Bearings For Flange Driveshaft Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 1999, Model line: A6, Model: AUDI A6 1999 C5 / 2.GPages: 10, PDF Size: 0.18 MB
Page 3 of 10
39-7
1 -
Transmission
2 -
Grooved ball bearing
3 -
Bearing housing on balance weight
4 -
Seal
Driving in Page 39
-13
5 -
Drive flange
6 -
Bolt, 25 Nm
Qty. 6
Pa
ge 3 of 10 Seal and
grooved ball bearin
g for flan
ge for driveshaft on transmission, re
placin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.3
Page 5 of 10
39-9
Removing
Transmission installed
- Disconnect driveshaft at the front Page 39
-
68
, lift clear and tie-up on selector linkage.
- Place a drip tray underneath.
- Unscrew rear oil drain plug (on end cover) and
drain transmission oil.
- Unscrew securing bolts for bearing housing.
Note:
Generally, the bearing housing is pressed out via
the spiral spring when loosening bolts from
cover.
If the bearing housing is not pressed off:
- Pull drive flange together with bearing housing and balance weight off
end cover.
A - M8/M10 stud
- Take off bearing housing.
Pa
ge 5 of 10 Seal and
grooved ball bearin
g for flan
ge for driveshaft on transmission, re
placin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.3