transmission AUDI A6 1999 C5 / 2.G AHA Engine Auxiliary Signals Checking Workshop Manual

[x] Cancel search | Manufacturer: AUDI, Model Year: 1999, Model line: A6, Model: AUDI A6 1999 C5 / 2.G
Pages: 22, PDF Size: 0.09 MB
AUDI A6 1999 C5 / 2.G AHA Engine Auxiliary Signals Checking Workshop Manual A6 1999 C5 / 2.G AUDI AUDI https://www.carmanualsonline.info/img/6/1041/w960_1041-0.png AUDI A6 1999 C5 / 2.G AHA Engine Auxiliary Signals Checking Workshop Manual
Search: (clock setting, check transmission fluid, fold seats, tow, gearbox, fuel filter location)

Page 5 of 22

AUDI A6 1999 C5 / 2.G AHA Engine Auxiliary Signals Checking Workshop Manual Notes: The A/C compressor is switched off during acceleration when the car is stationary or at slow speed. At wide open throttle the A/C compressor is switched off by the Transm

Page 6 of 22

AUDI A6 1999 C5 / 2.G AHA Engine Auxiliary Signals Checking Workshop Manual 24-167 Continuation If the displayed values are NOT OK: - Connect VAG1598/22 test box to ECM harness connector page 01 -67 . - Check wiring for open circuit, short c

Page 9 of 22

AUDI A6 1999 C5 / 2.G AHA Engine Auxiliary Signals Checking Workshop Manual Read safety precautions for test driving vehicles while using test equipment page 24 -9 . The speed signal is generated by the vehicle speed sensor (at the transmission), and process

Page 15 of 22

AUDI A6 1999 C5 / 2.G AHA Engine Auxiliary Signals Checking Workshop Manual 24-172 CAN-Bus, checking When a CAN-Bus malfunction is indicated during a check of DTC memory of the Engine Control Module (ECM), refer to the following test to eliminate the malfunc

Page 16 of 22

AUDI A6 1999 C5 / 2.G AHA Engine Auxiliary Signals Checking Workshop Manual 24-173 Checking - Check DTC memory of Transmission Control Module (TCM). Repair Manual, 5 Spd. Automatic Transmission 01V, Repair Group 01 If a DTC regarding the CAN-B
Search: (wheel torque, airbag disable, change language, fuse chart, maintenance reset, radiator)