check engine AUDI A6 1999 C5 / 2.G ATQ Engine Oxygen Sensor Control Checking
[x] Cancel search | Manufacturer: AUDI, Model Year: 1999, Model line: A6, Model: AUDI A6 1999 C5 / 2.GPages: 63, PDF Size: 0.31 MB
Page 28 of 63
24-99
Rapid data transfer
HELP
Select function XX
When indicated on display:
Note:
During basic setting, the Evaporative Emission (EVAP) canister purge
regulator valve (EVAP valve -N80-) is closed and the A/C compressor is
switched off - Press buttons -0- and -4- to select "Initiate basic setting" and press -Q-
button to confirm input.
Basic Settin
g
Q
Input displa
y group number XXX
When indicated on display:
- Press buttons -0-, -3- and -4- to select "display group number 034" and
press -Q- button to confirm input.
System in Basic Setting 34
1
2
3
4
When indicated on display:
Note:
This process can take a few minutes. - Use VAG1788/10 RPM adjuster to adjust engine speed to between
2800 and 3200 RPM.
- Continue test as soon as display field 2 indicates an exhaust
temperature of more than 380 C
Pa
ge 28 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 29 of 63
24-100
- Press -C- button.
- Let engine continue to idle Basic Setting
Q
Input displa
y group number XXX
When indicated on display:
- Press buttons -0-, -3- and -0- to select "display group number 030" and
press -Q- button to confirm input.
System in Basic Setting 30
1
2
3
4
When indicated on display:
Note:
"Oxygen sensor status" indicates status of oxygen sensor control and
oxygen sensors. - Check oxygen sensor status for oxygen sensor behind catalytic
converter in display fields 2 and 4.
Pa
ge 29 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 30 of 63
24-101
Display fields
1 2 3 4
Display group 030: Oxygen sensor status with engine at idle
Display X X X
X X X X X X
X X X
Indicated Oxygen sensor status, bank 1,
sensor 1 Oxygen sensor
status
Bank 2, sensor 1 Oxygen sensor status, bank 2,
sensor 1 Oxygen sensor
status
Bank 2, sensor 2
Functional
range 0 = off
1 = on 0 = off
1 = on 0 = off
1 = on 0 = off
1 = on
Specified
value 1 1 1
1 1 0 1 1 1
1 1 0
Notes
Meaning of display Page 24
-102
If specified value is not obtained Page 24
-111
If specified value is obtained but there is a malfunction stored in DTC memory Check oxygen
sensor control, page Page 24
-105
Notes:
Oxygen sensor control of oxygen sensor behind catalytic converter (bank 1 sensor 2 and bank 2 sensor 2) are not active
without engine load, meaning that the display is 0.
The first position of the 3 digit indication (heating) fluctuates between 0 and 1.
Pa
ge 30 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 33 of 63
24-103
Display fields
1 2 3 4
Display group 043: Oxygen sensor aging, oxygen sensor behind catalytic converter (bank 1)
Display xxxx/min
xxx C
x.xxx V
---
Indicated Engine speed
(RPM) Exhaust
temperature Voltage of oxygen sensor
behind catalytic converter,
bank 1 Diagnostic condition
Functional
range 630 to 6800
RPM 70 to 850 C
0.100 to 1.000 volts Test OFF
Test ON
B1-S2 OK
B1-S2 not OK
Specified
value 1800 to 2400
RPM above 380 C 0.100 to 1.000 volts B1-S2 OK
Notes
If specified value is not obtained
Check oxygen sensor heater Page
24
-116
If specified value B1-S2 OK" is obtained:
- Press -C- button.
- Press buttons -0-, -4- and -4- to select "display
group number 044" and press -Q- button to
confirm input.
Pa
ge 33 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 35 of 63
24-104
Display fields
1 2 3 4
Display group 044: Oxygen sensor aging, oxygen sensor behind catalytic converter (bank 2)
Display xxxx/min
xxx C
x.xxx V
---
Indicated Engine speed
(RPM) Exhaust
temperature Voltage of oxygen sensor
behind catalytic converter,
bank 2 Diagnostic condition
Functional
range 670 to 6800
RPM 70 to 850 C
0.100 to 1.000 volts Test OFF
Test ON
B2-S2 OK
B2-S2 not OK
Specified
value 1800 to 2400
RPM above 380 C 0.100 to 1.000 volts B2-S2 OK
Notes
If specified value is not obtained
Check oxygen sensor heater Page
24
-116
If specified value B2-S2 OK" is obtained:
- Press -C- button.
Pa
ge 35 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 36 of 63
24-105
Checking oxygen sensor control behind
catalytic converter
- Perform a test drive of approx. 10 minutes.
WARNING!
Observe safety precautions to reduce the risk
of accidents during road test Page 24
-1 .
- Let engine continue to run at idle.Basic Setting
Q
Input displa
y group number XXX
When indicated on display:
- Press buttons -0-, -3- and -7- to select "display group number 037" and
press -Q- button to confirm input.
System in Basic Setting 37
1
2
3
4
When indicated on display:
- Check oxygen sensor voltage in display field 2.
- Check dwell time between oxygen sensor 1 before catalytic converter
and oxygen sensor 2 behind catalytic converter in display field 3 and
diagnostic result in display field 4.
Pa
ge 36 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 37 of 63
24-106
Display fields
1 2 3 4
Display group 037: Diagnostic, oxygen sensor control system (bank 1)
Display xxx % x.xxx volts
xxx ms
---
Indicated Engine
load Oxygen sensor voltage
behind catalytic
converter, bank 1 Oxygen sensor correction
value between oxygen sensor
1 and oxygen sensor 2, bank 1 Diagnostic condition
Functional
range 12.0 to
100.0 % 0.100 to 1.000 V
-800 to 800 ms
Test OFF
Test ON
System OK
System not OK
Specified
value 12.0 to
26.0 % 0.100 to 1.000 V
-800 to 800 ms System OK
Notes
If specified value is not
obtained: Evaluation
display field 2
Page 24
-109
If specified value is not
obtained Page 24
-110
If "System not OK" is displayed:
Check Diagnostic Trouble Code
(DTC) memory Page 01
-15
or continuation Page 24
-110
Note for display field 3:
The oxygen sensor control behind catalytic converter overrules the oxygen sensor control before catalytic converter. It
corrects slight changes in the mixture (i.e. toward rich or lean) due to the oxygen sensor before catalytic converter by holding
oxygen sensor control before catalytic converter at its higher or lower point for a specific time (dwell time). If this time is in the
positive range (i.e. 50 ms), mixture is shifted in the -enrich- direction. If this time is in the negative range (i.e. -50 ms), mixture
Pa
ge 37 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 40 of 63
24-108
Display fields
1 2 3 4
Display group 038: Diagnostic of oxygen sensor control system (Bank 2)
Display xxx % x.xxx V xxx ms
---
Indicated Engine
load Oxygen sensor voltage
behind catalytic converter,
bank 2 Oxygen sensor correction
value between oxygen sensor
2 and oxygen sensor 2, bank
1 Diagnostic condition
Functional
range 12.0 to
100.0 % 0.100 to 1.000 V -800 to 800 ms
System OK
System not OK
Specified
value 12.0 to
26.0 % 0.100 to 1.000 V -800 to 800 ms System OK
Notes
If specified value is not
obtained: Evaluation
display field 2 Page 24
-
109
If specified value is not
obtained Page 24
-110
If "SYST not OK" is displayed:
Check Diagnostic Trouble Code
(DTC) memory Page 01
-15
or continuation
Page 24
-110
Note for display field 3:
The oxygen sensor control behind catalytic converter overrules the oxygen sensor control before catalytic converter. It
corrects slight changes in the mixture (i.e. toward rich or lean) due to the oxygen sensor before catalytic converter by holding
oxygen sensor control before catalytic converter at its higher or lower point for a specific time (dwell time). If this time is in the
positive range (i.e. 50 ms), mixture is shifted in the -enrich- direction. If this time is in the negative range (i.e. -50 ms), mixture
is shifted in the -lean- direction.
Pa
ge 40 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 45 of 63
24-113
If no malfunctions are found in wires: - Check shielded wire for short circuit to sensor wires.Harness connector
Terminal
VAG1598/31 test box
Socket
3 32
4 32
- Replace Engine Control Module (ECM) Page 24
-21
.
Pa
ge 45 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3
Page 48 of 63
24-115
If no malfunctions are found in wires: - Check shielded wire for short circuit to sensor wires.Harness connector
Terminal
VAG1598/31 test box
Socket
3 32
4 32
- Replace Engine Control Module (ECM) Page 24
-21
.
Pa
ge 48 of 63 Ox
yg
en sensor control, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.3