AUDI A6 2000 C5 / 2.G 01E Transmission Shift Control Mechanism User Guide

AUDI A6 2000 C5 / 2.G 01E Transmission Shift Control Mechanism User Guide A6 2000 C5 / 2.G AUDI AUDI https://www.carmanualsonline.info/img/6/1318/w960_1318-0.png AUDI A6 2000 C5 / 2.G 01E Transmission Shift Control Mechanism User Guide

Page 11 of 17

AUDI A6 2000 C5 / 2.G 01E Transmission Shift Control Mechanism User Guide 34-11
 
    
Tightening torques  Component  
  
Nm  
Hex bolt -1-   75  
Combi bolt -2-  
110 + 90   Gear shift housing to body   10  
Selector rod to transmission   25  
Connecting rod to transmissio

Page 12 of 17

AUDI A6 2000 C5 / 2.G 01E Transmission Shift Control Mechanism User Guide 34-12
      
Gear selector mechanism, adjusting
 
     
Requirements  
     
Selector mechanism, operating and relay 
elements must be in proper condition. 
     Selector mechanism must move freely.

Page 13 of 17

AUDI A6 2000 C5 / 2.G 01E Transmission Shift Control Mechanism User Guide 34-13
      
-  Measure distance between body and rear push 
rod (in selector mechanism). 
    
If that is not the case, obtain distance -a- as follows:   
Specification: distance a = 43 mm
    
-  Lo

Page 14 of 17

AUDI A6 2000 C5 / 2.G 01E Transmission Shift Control Mechanism User Guide 34-14
 
    
-  Loosen bolt for selector rod (arrow).
   Connection between selector rod and selector mechanism should 
move freely. 
-  Adjust gear shift as follows:
    
Note:  
The illustration sho

Page 15 of 17

AUDI A6 2000 C5 / 2.G 01E Transmission Shift Control Mechanism User Guide 34-15
 
    
Note:  
The illustration shows the gear shift from the right. 
Note:  
The gear shift must remain in the same position while the bolt is being 
tightened.   
Gear shift inclined slightly

Page 16 of 17

AUDI A6 2000 C5 / 2.G 01E Transmission Shift Control Mechanism User Guide 34-16
      
Gear shift adjustment, checking
 
     
The gear shift lever must rest in the 3rd/4th 
gear gate when transmission is in neutral. 
     
-  Check operation of 1st and 2nd gear stop.

Page 17 of 17

AUDI A6 2000 C5 / 2.G 01E Transmission Shift Control Mechanism User Guide 34-17
      
If the gear shift setting is incorrect it can be 
adjusted as follows: 
    
Note:  
The angle of forwards/backwards inclination of the gear shift must not be 
changed while the following
Page:   < prev 1-10 11-20